• International Journal of Precision Engineering and Manufacturing
• /
• 제8권4호
• /
• pp.63-69
• /
• 2007

The two-photon stereolithography (TPS) process is a promising technique for the fabrication of real three-dimensional (3D) nano/micro-structures via application of a femto-second laser, In TPS, when a near-infrared ultrashort-pulsed laser is closely focused onto a confined volume of photocurable resin, only the local area at the center of the focus is cured. Therefore, real 3D microstructures with resolution under the diffraction limit can be fabricated through a layer-by-layer accumulative technique, This process provides opportunities to develop neo-conceptive nano/micro devices in IT/BT industries, However, a number of issues, including development of effective fabrication methods, highly sensitive and functional materials, and neo-conceptive devices using TPS, must be addressed for the realization of industrial application of TPS. In this review article, we discuss our efforts related to TPS: effective fabrication methods, diverse two-photon curable materials for high functional devices, and applications.

• 대한전자공학회논문지SD
• /
• 제45권2호
• /
• pp.13-20
• /
• 2008

본 논문에서는 CMOS 이미지 센서의 웨이퍼 레벨 어셈블리를 위한 스페이스 제작 방법을 설명하였다. 스페이스 제작을 위해서 SU-8, PDMS, Si-interposer를 이용하는 세 가지 방법을 제안하였다. SU-8 스페이스에서는 균일한 두께 특성을 위해서 웨이퍼 회전 장치를 고안했으며, PDMS 스페이스에서는 glass/PDMS/glass 구조의 정렬 접합을 위해서 새로운 접합 방법을 제안하였다. Si-interposer를 이용한 스페이스 제작에서는 DRF을 이용한 접합 조건을 확립하였다. 세 가지의 실험 결과 Si-interposer를 이용한 스페이스 제작 시 glass/스페이스/glass 구조의 접합력이 가장 뛰어났으며, 접합력의 크기는 32.3MPa의 전단응력을 나타내었다.

• The Journal of the Acoustical Society of Korea
• /
• 제15권2E호
• /
• pp.76-84
• /
• 1996

The experimental testing results of the large-scale version of a forward-looking ultrasound imaging catheter(FLUIC) are presented, along with the fabrication techniques used, experimental methods, and comparisons of the measured and simulated results. The transducer model is verified by measuring the electrical impedance of the transducer. The pulse width, beamwidth, and the dynamic range for both transmit and pulse-echo response of the fabricated FLUIC are also analyzed. The experimental results conformed its forward-looking imaging capability and the sources of discrepancies between the simulated and experimental beam profiles are addressed.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.13-14
• /
• 2006

The use of soft-lithography instead of standard photolithography and dry etching technologies is attractive because inexpensive optical device can be realized. Polymerization using multi-photon absorption of materials is also a good method for optical waveguide fabrication. Laser induced self-writing technology of optical waveguide is also very simple and attractive. Using these processes, we can fabricate and interconnect optical circuits at once. In this presentation, several simple fabrication methods will be introduced. New optical loss evaluation method for polymer optical waveguides will also be presented

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 광학 및 양자전자학 워크샵
• /
• pp.87-93
• /
• 1990

Estimation and collection of the suitable recording materials are important for the fabrication of the holographic optical elements. In this study, silver halide emulsion, photoresist and dichromated gelatin are selected as a recording materials to investigate the properties and processing methods. Some parameters which affect the diffraction efficiencies of the holographic optical elements (HOE) are presented. As an example of the HOE, the results of design and the fabrication method of the off axis 12P hologram lens are also presented.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1993년도 제4회 학술발표회 논문개요집
• /
• pp.6-6
• /
• 1993

With brief instroduction of fabrication methods of dia.ond fillls by plasma CVD, recent progress in diamond research mainly done in the author's laboratory at Osaka University is reviewed.especially on the following topics: "low temperature diallond fabrication", "ion implantation", "hydrogen plasma treatment of ion-implanted diaaond to remove ion-induced damage", "Oxygen diffusion into the bulk assisted by the hydrogen treatllent", and "hole-burning effect".ffect".

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1071-1074
• /
• 2006

Fabrication and investigation of composite made of graphite, SiC, mullite and aluminum as the additive are the aim of this project. Aluminum acts as an anti-oxidant. SiC is a non-metallic anti-oxidant that increases composite strength. Different compositions with influent percents of aluminum have been selected to determine product specifications by XRD, SEM and STA methods. Results show that the composition of 40wt% graphite-20% SiC- 20% mullite-20% aluminum is a more robust and occurs at elevated temperatures than other graphite combustion composites.

• The Journal of Advanced Prosthodontics
• /
• 제7권2호
• /
• pp.122-128
• /
• 2015

PURPOSE. To assess the marginal and internal gaps of the copings fabricated by computer-aided milling and direct metal laser sintering (DMLS) systems in comparison to casting method. MATERIALS AND METHODS. Ten metal copings were fabricated by casting, computer-aided milling, and DMLS. Seven mesiodistal and labiolingual positions were then measured, and each of these were divided into the categories; marginal gap (MG), cervical gap (CG), axial wall at internal gap (AG), and incisal edge at internal gap (IG). Evaluation was performed by a silicone replica technique. A digital microscope was used for measurement of silicone layer. Statistical analyses included one-way and repeated measure ANOVA to test the difference between the fabrication methods and categories of measured points (${\alpha}$=.05), respectively. RESULTS. The mean gap differed significantly with fabrication methods (P<.001). Casting produced the narrowest gap in each of the four measured positions, whereas CG, AG, and IG proved narrower in computer-aided milling than in DMLS. Thus, with the exception of MG, all positions exhibited a significant difference between computer-aided milling and DMLS (P<.05). CONCLUSION. Although the gap was found to vary with fabrication methods, the marginal and internal gaps of the copings fabricated by computer-aided milling and DMLS fell within the range of clinical acceptance (< $120{\mu}m$). However, the statistically significant difference to conventional casting indicates that the gaps in computer-aided milling and DMLS fabricated restorations still need to be further reduced.

• 한국BIM학회 논문집
• /
• 제5권2호
• /
• pp.12-18
• /
• 2015

Bridge piers typically have circular or rectangular shapes without decorative design. Prefabrication for accelerated construction has been widely adopted in bridge structures. Cost for steel formwork is a main restriction of creative irregular shapes. 3D modelling techniques allow creative design of columns and 3D printing provides possibility to minimize the fabrication cost. In this paper, 3D design process of bridge piers was suggested by converting 2D picture into 3D decorative shape. Formwork design using 3D printed panels was also proposed and mock-up tests were conducted. Precast columns need accurate geometry control from fabrication to assembly. Laser scanning and geometry control devices were adopted. Through the digitalized process of design, fabrication and assembly, creative design of structures can be realized in reasonable cost range.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1394-1399
• /
• 2007

Recently, Study of 3D freeform fabrication method was working in the various applications. For example, in the powder base, it's laminated using a binding method or laser sintering method. However, these methods are not suitable in the office environments because it dust with powder that is bad for health. In this paper, we introduce a method of 3D freeform fabrication using a curing of photo-polymer resin and construct a system has multi printing head. A photo-polymer curing method has simply fabrication process and high strength of manufacturing part. However, this method has a problem on the multi print-head system. Because multi-printing system has a other printing method compare with a single printing system. Therefore, we experiment a single head 3D printing and proposed a 3D printing method using a multi-piezo head.