• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.279-288
• /
• 2000

The variations of output energy due to tilt output coupler for different types of pulsed Nd:YAG laser resonators were compared by measuring FWHM (full width at half maximum) which means the width of angle displacement where maximum output energy decreases to half value. We proposed a new configuration of pulsed solid-state laser resonator which had high FWHM for tilting of output coupler and which was little sensitive for tilting of rear optics. We proved that our laser resonator had high alignment stability using ABeD ray matrix method because the ray matrix of such a resonator corresponded to unit matrix. atrix.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.3
• /
• pp.105-109
• /
• 2017

AlN single crystal was thermally treated at $1200^{\circ}C$ and $1500^{\circ}C$ in the ambient gas of nitrogen. AlN single crystal was obtained by sublimation growth process using by a facility having a growth part which was heated by RF (Radio Frequency) induction heating. In this report, the optical microscopic results taken from thermally treated AlN single crystal and FWHM (Full width of half maximum) measured by DCXRD (Double crystal X-ray Diffractometry) were reported.

• The Bulletin of The Korean Astronomical Society
• /
• v.36 no.1
• /
• pp.65.2-65.2
• /
• 2011

천체관측에서 가장 중요한 요소인 초점은 관측된 영상의 활용가치를 좌우하게 된다. 관측자가 직접 관측하는 망원경의 경우 직접적인 확인을 통하여 초점을 맞추어 관측하지만, 관측자가 개입하지 않는 자동관측 망원경의 경우 초점을 맞추는 일은 생각처럼 쉬운 일이 아니다. 자동으로 초점을 맞추기 위하여 기본적으로 활용되는 변수는 FWHM(Full with Half Maximum)이며, 초점이 전혀 맞지 않는 영상의 경우 FWHM을 결정할 수 없으며, 자동관측 망원경의 경우 관측된 영상을 전부 사용할 수 없게 된다. 본 연구에서는 초점이 전혀 맞지 않는 경우에도 초점을 맞출 수 있도록 FWHM을 활용하지 않고 별상의 크기를 직접 계산하여 좋은 초점을 맞출 수 있는 프로그램을 개발하였으며, 새로 개발한 프로그램은 결과 도출시간이 빠르고 광축이 맞지 않은 영상에서도 활용할 수 있어 활용성을 극대화 하였다. 한편, 리눅스 및 윈도우 기반의 영상 관측 컴퓨터에서도 활용할 수 있어 앞으로 활용성이 더 많아 질 것으로 기대한다.

• Journal of Sensor Science and Technology
• /
• v.31 no.2
• /
• pp.107-114
• /
• 2022

The effects of ring radius and coupling spacing on the free spectral range (FSR), full width at half maximum (FWHM), quality factor, and sensitivity of single-channel and add-drop channel slot ring resonators were systematically investigated using FIMMPROP and PICWAVE numerical software. The single-channel ring resonator exhibited better characteristics, namely, a wider FSR and narrower FWHM compared with the add-drop structure; thus, it was evaluated to be more suitable for biochemical sensors. The FSR, FWHM, quality factor, and sensitivity for a single channel ring resonator with a radius of 59.4 ㎛ and coupling gap of 0.5 ㎛ were 2.4 nm, 0.087 nm, 17677, and 550 [nm/RIU], respectively.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.15 no.2
• /
• pp.83-87
• /
• 2011

Purpose: Recently in diagnostics area PET/CT is using a variety of areas including oncology, as well as in cardiology, neurology, etc. While increasing in the importance of PET/CT, there are various researches in the image quality related to reconstruction method. We compared and tested Iterative 2D Reconstruction Method with True X Reconstruction method by Siemens through phantom experiment, so we can see increasing of clinical usefulness of PET/CT. Materials and Methods: We measured contrast ratio and FWHM due to evaluating images on dose and experiment using Biograph 40 True Point PET/CT (Siemens, Germany). Getting a result of contrast ratio and FWHM, we used NEMA IEC PET body phantom (Data Spectrum Corp.) and capillary tube. We used the current TrueX and the previous Iterative 2D algorithm for all images which have 10 minutes long. Also, a clinical suitability of parameter for Iterative 2D and a recommended parameter by Siemens for True X are applied to the experiment. Results: We tested FWHM using capillary tube. As a result, TrueX was less than Iterative 2D. Also, the differences of FWHM get bigger in low dose. On the other hand, we tested contrasts ratio using NEMA IEC PET body phantom. As a result, TrueX was better aspect than Iterative 2D. However, there was no difference in dose. Conclusion: In this experiment, TrueX get higher results of contrast ratio and spatial resolution than Itertive 2D through experiment. Also, in the reconstruction result through TrueX, TrueX had better aspect of resolution than Iterative 2D in low dose. However, contrast ratio had no specific difference. In other words, TrueX reconstruction method in PET/CT had higher clinical value in use because TrueX can reduce exposure of patient and had a better quality of screen.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.24 no.3
• /
• pp.89-93
• /
• 2014

In this study, effects of the V/III ratio on a-plane GaN epitaxial on r-plane grown by HVPE have been investigated. According to increasing of V/III ratio, the value of FWHM of a-plane (11-20) GaN and the value of surface roughness (Ra) were decreased. Growth rate of a-plane GaN epitaxial layer were increased until V/III ratio = 7 as the increasing of V/III ratio, but it was reduced at V/III ratio = 10. At V/III ratio = 10, the FWHM of a-plane (11-20) GaN RC and the surface roughness (Ra) were 829 arcsec and 1.58 nm, respectively, as the lowest value in this study. Also for V/III ratio = 10, cracks under surface or voids were observed the lowest values in images of optical microscope. An M-shaped azimuthal dependence over $360^{\circ}$ angle range was observed for all samples. At V/III ratio = 10, the difference of FWHM of a-plane GaN between $0^{\circ}$ and $90^{\circ}$ was 439 arcsec revealed as the lowest value in the 4 samples.

• Korean Journal of Optics and Photonics
• /
• v.33 no.4
• /
• pp.177-186
• /
• 2022

The performance of a surface plasmon resonance sensor is evaluated based on the sensitivity (nm/RIU) and sharpness from the full width at half maximum (FWHM) and the peak depth of a resonance peak. These factors are determined by the materials and conformational properties of the sensing structure. In this paper, we investigated an optimized insulator-metal-insulator (IMI) multilayer-based surface plasmon resonance sensor structure to simultaneously achieve high sensitivity, narrow FWHM, and deep peak depth while using gold for the metallic film layer which occurs peak broadening. By adopting the optimized structure, sensitivity of 8,390 nm/RIU, FWHM of 11.92 nm, and a resonance peak depth of 93.1% were achieved for 1.45-1.46 refractive index variation of the sensing layer. With the suggested structure conformation, high sensitivity and resolution of sensing performance can be achieved.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.1
• /
• pp.88.3-88.3
• /
• 2015

Kepler mission is performing the quantitative and qualitative observations. Hence, it is possible to statistically study, which is called 'Ensemble asteroseismology', about seismic properties. They investigated about global oscillation parameters. In this study, we performed statistically study about global seismic parameters with Kepler data. Relation between global oscillation parameters (${\Delta}{\nu}$ and ${\nu}max$) are approximately confirmed. We investigated newly about distribution of Full-With-at-Half-Maximum (FWHM) and relation between FWHM and other global oscillation parameters.

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.02a
• /
• pp.36-38
• /
• 1989

We have developed Magnetic Pulse Compression System to realize repetitive excimer laser excitation. The principle of this system is to use the large change in permiability owing to the nolinear characteristics of ferro-magnetic material (Metglas2605s-2 metal ribon). Prior to the laser operation, the MPC system was tested with a dummy load (5$\Omega$) and laser head. Laser head has a discharge volume of 1.0 (w) x 2.0 (h) x 20.0(1) cm. This MPC system compressed a 6.2us (FWHM), 80 A pulse into a 0.4us(FWHM), 1.3kA pulse.

• Journal of Sensor Science and Technology
• /
• v.30 no.4
• /
• pp.250-254
• /
• 2021

A highly sensitive and selective non-dispersive infrared (NDIR) carbon dioxide gas sensor requires achieving high transmittance and narrow full width at half maximum (FWHM), which depends on the interface of the optical filter for precise measurement of carbon dioxide concentration. This paper presents the design, simulation, and fabrication of a Fabry-Perot filter based on a distributed Bragg reflector (DBR) for a low-cost NDIR carbon dioxide sensor. The Fabry-Perot filter consists of upper and lower DBR pairs, which comprise multilayered stacks of alternating high- and low-index thin films, and a cavity layer for the resonance of incident light. As the number of DBR pairs inside the reflector increases, the FWHM of the transmitted light becomes narrower, but the transmittance of light decreases substantially. Therefore, it is essential to analyze the relationship between the FWHM and transmittance according to the number of DBR pairs. The DBR is made of silicon and silicon dioxide by RF magnetron sputtering on a glass wafer. After the optimal conditions based on simulation results were realized, the DBR exhibited a light transmittance of 38.5% at 4.26 ㎛ and an FWHM of 158 nm. The improved results substantiate the advantages of the low-cost and minimized process compared to expensive commercial filters.