• Analytical Science and Technology
• /
• v.24 no.2
• /
• pp.150-157
• /
• 2011

Aflatoxins are secondary metabolites of the molds of Aspergillus flavus and Aspergillus parasiticus. They are highly carcinogenic compounds and can affect a wide range of vegetable commodities such as cereals (especially corn), nuts, peanuts, fruits and oil seeds, in the field and during storage. In fact, oilseeds are often stored for weeks in conditions that promote the mould growth, and the possible consequent presence of aflatoxins in oilseeds can lead to their transfer in oil. In addition, aflatoxins can be found as a natural contaminant in multi-cereals and beans making baby food for infants and young-children. The objective of this study was to validate the liquid extraction method or develop an analytical method for edible oil and infant-children foods. Therefore, this study developed condition of extract for aflatoxins ($B_1$, $B_2$, $G_1$ and $G_2$) in edible oil using a high performance liquid chromatography with florescence detector (HPLC/FLD). Aflatoxins were extracted from edible oil samples by means of MSPD (Matrix solid phased dispersion), utilizing $C_{18}$ as dispersing material and purified by using immunoaffinity column. The gression line coefficients were above 0.999. The recoveries for aflatoxins ranged from 85.9 to 93.0%, and relative standard deviations were below 5.7%. The new developed method of aflatoxins effectively enhanced recoveries by using MSPD-Immunoaffinity column compared with liquid extraction. The analytical method for liquid extraction of aflatoxin was appropriate for infant-children food. Reviewing the current method, the recoveries of aflatoxins ($B_1$, $B_2$, $G_1$ and $G_2$) were 89.5~92.3%.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.6
• /
• pp.639-648
• /
• 2010

The optimal conditions for the analysis of BPA by HPLC-MS/MS was investigated and the ultrasound degradation capacity of the BPA, with the goal to establish the proper directions for analyzing infinitesimal quantities of BPA by HPLC-MS/MS was examined. The MDL and LOQ of BPA analyzed by HPLC-MS/MS were measured 0.13 nM and 1.3 nM respectively, its sensitivity about 620 and 32 times greater than HPLC-UV (MDL: 81.1 nM, LOQ: 811 nM) and FLD (MDL: 4.6 nM, LOQ: 46 nM). In other words, the new method enables the analysis of BPA with the accuracy up to one 1,180th of the amount specified in U.S. EPA guideline for drinking water. Degradation rate of BPA by ultrasound measured over 95% under 580 kHz and 1000 kHz frequency within 30 minutes of treatment, whereas the rate showed some decrease at 28 kHz frequency. At 580 kHz of ultrasound has proven to be the most effective among others at degradation rate and $k_1$ value, so we concluded that this frequency of ultrasound creates hospitable condition for the combined process of degradation by pyrolysis and oxidization. With the addition of 0.01 mM of $CCl_4$, BPA with the initial concentration of 1 ${\mu}M$ was degraded by more than 98% within 30 minutes, the $k_1$ value measured 5 minutes and 30 minutes into the experiment both showed increases by 1.4 and 1.1 times, respectively, compared with BPA without $CCl_4$. It is also found that the main degradation mechanism of BPA by ultrasound is oxidization process by OH radical, based on the fact that the addition of 10 mM of t-BuOH decreased the rate of BPA degradation by around 60%. However, 33% of BPA degradation rate obtained with the addition of t-BuOH implies further degradation done by pyrolysis or other sorts of radical beside OH radical.

• Korean Journal of Food Science and Technology
• /
• v.39 no.1
• /
• pp.25-28
• /
• 2007

A survey of total aflatoxin levels was conducted on 565 food samples (cereals, nuts, etc) collected in commercial markets. The determination of aflatoxins ($B_{1}$, $B_{2}$, $G_{1}$ and $G_{2}$) was performed using HPLC with fluorescence detector. The Limit of Detections (LODs) of the B group and G group were 0.05 ng/g and 0.07 ng/g, respectively. In addition, recoveries of rice, peanut butter, and red pepper flour were satisfactory. Total aflatoxin was detected 27 samples(4.8%) out of 565 samples. Incidence ratios in cereals, nuts, processed products, and other foods were 0.2, 0.4, 3.0 and 1.2%, respectively, but aflatoxin was not detected in pulse and dried fruits. The daily intake of total aflatoxin using food intakes was 0.04 ng/kg bw/day.

• Journal of Food Hygiene and Safety
• /
• v.21 no.2
• /
• pp.76-81
• /
• 2006

We optimized conditions of extract solvents and elution solvents for total aflatoxins in foods using HPLC/FLD. The extract solvent was 70% methanol solution including 1% NaCl and the 3 mL of acetonitrile was used as elution solvent using immnuoaffinity column. The detection limits (LOD) was 0.05 ng/g. The recoveries for total aflatoxins ($B_1,\;B_2,\;G_1\;and\;G_2$) studied in foods were cereals ($74.1{\sim}95.5%,\;83.7{\sim}98.8%,\;80.4{\sim}102.4%,\;72.8{\sim}76.5%$), pulses ($85.8{\sim}87.5%,\;83.8{\sim}90.7%,\;92.0{\sim}94.5%,\;60.6{\sim}65.6%$), nuts ($84.6{\sim}97.1%,\;86.0{\sim}94.1%,\;95.5{\sim}111.5%,\;71.0{\sim}89.9%$), processed foods ($81.5{\sim}87.1%,\;82.8{\sim}85.8%,\;85.4{\sim}92.7%,\;68.9{\sim}76.4%$), dried fruits ($83.6{\sim}93.5%,\;78.1{\sim}90.4%,\;93.0{\sim}108.5%,\;64.9{\sim}78.5%$) and other foods ($72.5{\sim}98.3%,\;73.1{\sim}96.4%,\;83.5{\sim}107.2%,\;64.2{\sim}75.8%$), respectively.

• Journal of Food Hygiene and Safety
• /
• v.32 no.4
• /
• pp.267-274
• /
• 2017

This paper deals with the natural occurrence of total aflatoxins ($B_1$, $B_2$, $G_1$, and $G_2$) in commercial herbs for food and medicine. To monitor aflatoxins in commercial herbs for food and medicine not included in the specifications of Food Code, a total of 62 samples of 6 different herbs (Bombycis Corpus, Glycyrrhizae Radix et Rhizoma, Menthae Herba, Nelumbinis Semen, Polygalae Radix, Zizyphi Semen) were collected from Yangnyeong market in Seoul, Korea. The samples were treated by the immunoaffinity column clean-up method and quantified by high performance liquid chromatography (HPLC) with on-line post column photochemical derivatization (PHRED) and fluorescence detection (FLD). The analytical method for aflatoxins was validated by accuracy, precision and detection limits. The method showed recovery values in the 86.9~114.0% range and the values of percent coefficient of variaton (CV%) in the 0.9~9.8% range. The limits of detection (LOD) and quantitation (LOQ) in herb were ranged from 0.020 to $0.363{\mu}g/kg$ and from 0.059 to $1.101{\mu}g/kg$, respectively. Of 62 samples analyzed, 6 semens (the original form of 2 Nelumbinis Semen and 2 Zizyphi Semen, the powder of 1 Nelumbinis Semen and 1 Zizyphi Semen) were aflatoxin positive. Aflatoxins $B_1$ or $B_2$ were detected in all positive samples, and the presence of aflatoxins $G_1$ and $G_2$ were not detected. The amount of total aflatoxins ($B_1$, $B_2$, $G_1$, and $G_2$) in the powder and original form of Nelumbinis Semen and Zizyphi Semen were observed around $ND{\sim}21.8{\mu}g/kg$, which is not regulated presently in Korea. The 56 samples presented levels below the limits of detection and quantitation.

• Korean Journal of Food Science and Technology
• /
• v.41 no.4
• /
• pp.362-368
• /
• 2009

Roasting may lead to the formation of undesired compounds, such as polycyclic aromatic hydrocarbons (PAHs). In this study, green coffee beans were roasted under controlled conditions and the formation of PAHs during the roasting process was monitored. Roasting was performed in a hot air roaster, with an inlet air temperature varying from 150 to $250^{\circ}C$ for 5, 10, and 20 min. The PAH content of the roasted coffee was then evaluated by HPLC-FLD. The levels of total PAHs in Arabica (Colombia, Brazil) and Robusta (India) coffee samples were 1.26-215.07, 1.85-178.14, and 0.18-2.61 ${\mu}g$/kg, respectively.

• Journal of Food Hygiene and Safety
• /
• v.25 no.2
• /
• pp.83-90
• /
• 2010

This study was conducted to investigate the residue amount of harmful materials on the 153 commercial medical herbs in Gwangju area. It was performed using the GC-ECD, GC-NPD, GC-MSD and the LC-UVD, LC-FLD, LC-MSD to analyze 200 pesticides. The heavy metals were determined using a Mercury analyzer and AAS. The sulfur dioxides were analyzed by modified Monnier-Williams method. The residual pesticides were detected in 7 samples, and were over MRLs (Maximum Risk Levels) in 2 samples (1.3%). The mean values of heavy metal contents (mg/kg) were Pb, 0.570; Cd, 0.081; As, 0.082; Hg, 0.0093. The measured values of Pb, As, Hg showed within MRLs. The excess samples of MRLs were 3 samples (changchul 2, cheongung 1) on Cd. The sulfur dioxides were over MRLs in 7 samples (4.6%), hwanggi and gugija. These results will be used to establish on the regulation of commercial medical herbs in Gwangju area.

• Analytical Science and Technology
• /
• v.24 no.3
• /
• pp.225-230
• /
• 2011

Anatoxin-a is a cyanobacterial neurotoxin with a high toxicity produced by Anabaena, Aphanizomenon and Oscillatoria. Water bloom, formed by Anabaena has been occurring frequently in Lake Yeongchun. It is need to develop a sensitive method for determination of anatoxin-a to control potential hazard in raw water resources. In this study, we developed a highly sensitive analytical method of anatoxin-a using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with fluorescence detection. Anatoxin-a was converted into a highly fluorescent derivative using 4-fuoro-7-nitro-2,1,3-benzoxadiazole (NBF-F). The method was evaluated in terms of linearity of calibration curve, recovery and repeatability, and the adequate values were obtained. The method detection limit was $0.034\;{\mu}g/g$ and $0.022\;{\mu}g/L$ for algal and water samples, respectively. The concentrations of anatoxin-a were measured in algal and water samples from Lake Andong, Yeongchun and Daechung and ranged from $0.135\;{\mu}g/g$ to $10.979\;{\mu}g/g$ in algal samples and not detected in water samples.

• Korean Journal of Environmental Agriculture
• /
• v.30 no.2
• /
• pp.111-117
• /
• 2011

BACKGROUND: Anthocyanins have been recognized as health-enhancing substances due to their antioxidant activity, anti-inflammatory, anticancer, and hypoglycemic effects. The objective was to identify anthocyanins-rich rice grains for the development of functional foods and/or functional food colorants METHODS AND RESULTS: Rice grains of one black and three red-hulled rice varieties were extracted with acidified 80% aqueous methanol. The antioxidant activity of the methanolic extracts was screened on TLC plates and in an in vitro assay using DPPH (1, 1-diphenyl-2-picrylhydrazyl) as a free radical source. Red-hulled rice varieties exhibited higher antioxidant activity (88%, 1 mg/mL) than black rice (67%, 1 mg/mL). Among the red-hulled varieties tested, rice variety SSALBYEO54 (901452) was the most active (72%, 0.5 mg/mL). Rice extracted anthocyanin compounds were analyzed by HPLC-DAD-FLD and LC-MS/MS. Red-hulled varieties comprised cyanidin-3-glucoside in addition to ferulic acid esters, apigenin and kaempferol glycosides. CONCLUSION(s): Anthocyanins identified in the black rice variety were cyanidin-7-O-galactoside, cyanidin-3-Oglucoside, cyanidin-3'-O-glucoside, cyanidin-5-O-glucoside, cyanidin-3, 7-O-diglucoside, cyanidin-3, 5-O-diglucoside and peonidin-4'-O-glucoside. The results of this study show that the black rice (IT212512) and red-hulled rice variety SSALBYEO54 (901452) contain notable antioxidant activity for potential use in nutraceutical or functional food formulations.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.184-189
• /
• 2018

Recently, research on lightweight automobiles is increasing continuously to respond to the high safety standards and environmental regulations. The application of high strength steel is one of the effective methods for developing lightweight car bodies. A TWB (Tailor Welded Blank) is major method that allows partial high strength with light weighting using a multi-thickness and multi-material welded blank. On the other hand, additional welding process is required to prepare the blank and quality control for the welding process also required. To secure this point, the TRB (Tailor Rolled Blank) method was suggested. In the TRB method, the thickness of sheet is controlled by the rolling presses and the production efficiency is much higher than welding in TWB methods. In this study, the formability of high strength TRB steel plate was analyzed to examine the rolling effect of the blank. The formability of the specimen was tested using 0.8 and 1 mm thick steel sheets for the TRB plate. The strain was analyzed by the digital image sensing of grid markings on the specimen and the forming limit diagram was calculated. An Erichsen test for the 0.8 and 1 mm thick TRB specimens was carried out and the formability was investigated by comparing with FE analysis.