• JSTS:Journal of Semiconductor Technology and Science
• /
• 제5권2호
• /
• pp.102-106
• /
• 2005

A low dark current CMOS image sensor (CIS) pixel without any process modification is developed. Dark current is mainly generated at the interface region of shallow trench isolation (STI) structure. Proposed pixel reduces the dark current effectively by separating the STI region from the photodiode junction using simple layout modification. Test sensor array that has both proposed and conventional pixels is fabricated using 0.18 m CMOS process and the characteristics of the sensor are measured. The result shows that the dark current of the proposed pixel is 0.93fA/pixel that is two times lower than the conventional design.

• 생명과학회지
• /
• 제25권6호
• /
• pp.703-708
• /
• 2015

Hox 유전자는 호메오도메인을 포함한 전사인자로써, 발생 과정 중 전후축을 따라 몸의 형태 형성을 조절하는 역할을 한다. 레티노산(RA)은 발생 과정에서 필수적인 형태형성인자이며 세포의 특성을 결정하는데 중요한 조절자이다. 특히, RA는 생쥐나 인간으로부터 만들어진 배아암종(EC)세포에서 Hox 유전자의 발현을 조절한다고 밝혀져 있다. 또한 RA에 의한 세포 분화와 유전자 조절 과정에 히스톤 변이가 중요한 역할을 하는 것으로 보고되어 있다. 히스톤 변이가 RA에 의해 유도되는 Hox 유전자의 발현에 특이적인 역할을 할 것으로 유추되기 때문에, 이 연구의 목적은 F9 생쥐배아 기형암종세포에서 RA에 의해 유도되는 Hoxc 유전자의 순차적인 발현이 히스톤 변이에 의해 일어나는 것인지를 조사하는 것이다. Hox 유전자의 발현 양상과 히스톤 변이는 semi-quantitative RT-PCR, RNA-sequencing과 chromatin immuno-precipitation (ChIP)-PCR 기법을 이용하여 관찰하였다. RA 처리 후(0일(D0), 1일(D1), 3일(D3)), Hoxc4 유전자의 발현(D1)은 Hoxc5부터 –c10 유전자(D3)보다 먼저 시작되었다. Hox가 발현하지 않는 D0 샘플은 전사 억제 마커인 H3K27me3이 모든 Hoxc 좌위에 강하게 표지 되어 있었으나 D1과 D3 샘플에서는 모든 좌위의 H3K27me3 표지가 확연히 줄어들어 있었다. 전사 발현 마커인 H3K4me3가 Hoxc 유전자의 순차적인 발현과 더 연관성이 있는 것으로 보이는데 D1에서 Hoxc4 발현과 함께 H3K4me3이 표지 되어 있었고, D3에서는 Hoxc 유전자 발현과 함께 모든 좌위에서 H3K4me3 마커가 존재했기 때문이다. 모든 결과를 종합해 보았을 때 F9 세포에서 RA에 의해 유도된 Hoxc 유전자의 순차적인 발현은 Hoxc 좌위에서 H3K27me3가 사라지고, H3K4me3가 표지 되는 히스톤 메틸화의 변이에 의해 결정되는 것으로 사료된다.

• Korean Membrane Journal
• /
• 제4권1호
• /
• pp.20-24
• /
• 2002

The surface of polysulfone membranes has been modified using the fluorine chemicals, ITFE (2-iodo-1,1,1-trifluoro-ethane F.W.=209.94) and PFPI (1H,1H-pentafluoro-n-propyl iodide F.W.=259.95), and PFI (1H,1H,2H,2H-perfluorohexyl iodide, F.W.=373.99) based on Friedel-Crafts reaction mechanism with varying reaction temperatures, reaction time, and catalysis types. The resulting membranes were characterized through mainly the contact angle measurement and pure water permeability. The smaller reactant shows the larger contact angles. FeBr$_3$ catalyst is more effective than AlCl$_3$. Typically, the PS film treated with ITFE at $25^{\circ}C$ under FeBr$_3$ catalyst showed the contact angle 78.5$^{\circ}C$ which indicated 10% over the value of unreacted PS films. More than 50% of pure water flux 8.0 g/$m^2$hr, reduced at reaction time 10 min relative to the original flux, 3.49 g/$m^2$hr.

• 대한후두음성언어의학회지
• /
• 제16권1호
• /
• pp.10-14
• /
• 2005

Background and Objectives : Vowels are characterized on the basis of formant patterns. The first formant(F1) is determined by high-low placement of the tongue, and the second formant (F2) by front-back placement of the tongue. The fundamental frequency(F0) of a soprano often exceed the normal frequency of the first formant. And the vocal intensity is boosted when F0 is high and a harmonic coincides with a formant. This is called a formant tuning. Experienced singers thus learned how to tune their formants over a resonable range by lowering the tongue to maximize their vocal intensity. So, the current study aimed to identify the formant tuning in one experienced soprano by comparing the first formants of vowel [i] in three different voice production : speech, ascending scale, and vocalize. Materials and Method : All voices recordings of vowel [i] in speech, ascending scale (from F4 note to A4 note), and vocalize(:Ridente la calam") were made with digital audio tape-corder in a sound treated room. And the captured data were analyzed by the long term average(LTA) power spectrum using the FFT algorithm of the Computerized Speech Lab(CSL, Kay elementrics, Model, 4300B). Results : Although the first formant of vowel [i] in speech was 238Hz, those of ascending scale [i] were 377Hz, 405Hz, 453Hz respectively in F4(349z), G4(392Hz), A4(440Hz) note, and 722Hz, 820Hz, 918Hz respectively in F5 (698Hz), G5(784Hz), A5(880Hz) note. In vocalize, first formants of [i] were 380Hz, 398Hz, 453Hz respectively in F4, G4, A4 note, and 720Hz, 821Hz, 890Hz respectively in F5, G5, A5 note. Conclusion : These results showed that the first formant of ascending scale and vocalize sustained higher frequency than fundamental frequency in high pitch. This finding implicates that the formant tuning of vowel [i] in ascending scale was also noted in vocalize.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.581-582
• /
• 2006

In this paper, we investigate three different types of multi-fingered layout nMOSFET devices with varying $W_f$(unit finger width) and $N_f$(number of finger). Using layout modification, we improve $f_T$(current gain cutoff frequency) value of 15GHz without scaling down, and moreover, we decrease $NF_{min}$(minimum noise figure) by 0.23dB at 5GHz. The RF noise can be reduced by increasing $f_T$, choosing proper finger width, and reducing the gate resistance. For the same total gate width using multi-fingered layout, the increase of finger width shows high $f_T$ due to the reduced parasitic capacitance. However, this does not result in low $NF_{min}$ since the gate resistance generating high thermal noise becomes larger under wider finger width. We can obtain good RF characteristics for MOSFETs by using a layout optimization technique.

• Journal of Chest Surgery
• /
• 제17권4호
• /
• pp.557-564
• /
• 1984

Of the valve replacement patients operated between 1983 and June, 1984, 75 patients need more than 60 minutes of aortic cross-clamping time. 42 patients performed single valve replacement [35 MVR, 7 AVR with or without TAP] and remainder needs double valve replacement with or without TAP. The average aortic clamping time was 95.1 minutes. They need 30 minutes more extra-corporeal circulation time than aortic clamping time. The patients were divided into two groups by usage of cardioplegic solution. Group I [n=31] with Bretschneider solution and group II with potassium cardioplegic solution [M.G.H. modification] were analyzed by extra-corporeal circulation data,/CG and Echocardiography findings, and clinical data. There was no difference between two groups in Bivon addition amounts [cc/kg] and E.F. and S.F. by echocardiography, group I need 1 more electrocardioversion to convert sinus rhythm postoperatively. Also no difference could be found in patients whose preoperative C.I. was above 2.0 between two group. But significant postoperative decrease in E.F. was found in group I whose preoperative C.I. was below 2.0. Relatively longer ECC time was also needed in same group. Ischemic changes in ECG and low cardiac output syndrome was, however more prevalent in groupII. As a whole, the clinical data was satisfactory with both cardioplegic solution in clinical practice.

• Current Applied Physics
• /
• 제18권11호
• /
• pp.1359-1367
• /
• 2018

In this work, we investigated the spectroscopic properties of $LiY_xSr_yZrO_{3+{\alpha}:Eu^{3+}$, a red emitting nanophosphor based on $SrZrO_3$ perovskite. The synthesis process was an auto-combustion process. X-ray diffractograms show the orthorhombic structure of $SrZrO_3$. Photoluminescence (PL) excitation spectra display a split charge transfer band revealing the presence of two possible sites for the $Eu^{3+}$ ions. The emission spectra at 231 nm excitation illustrate the dominance of the $^5D_0-^7F_1$ transition, which is an indication that the smaller sized $Eu^{3+}$ ions are mostly situated at the more ordered (symmetric) $Sr^{2+}$ sites. The emission spectra at 292 nm & 397 nm excitations show the dominance of $^5D_0-^7F_2$ transition which suggests some of the $Eu^{3+}$ ions are also situated at the distorted $Zr^{4+}$ sites. Both the intensity parameters, asymmetry ratio and the decay lifetimes of the nanophosphors show dependence on $Y^{3+}$ concentration, signifying a modification in the host structure. Maximum quantum efficiency value of ${\approx}46%$ was obtained for the nanophosphors which indicate the need for improvement for practical applications. CIE coordinates show the suitability of this phosphor for both red emission in LED and as a complementary colour for white LED applications.

• 한국재료학회지
• /
• 제16권3호
• /
• pp.168-172
• /
• 2006

Single pulse of 2.0 to 3.5 kJ from $150{\mu}F$ capacitor was applied to the cp Ti rod for its surface modification and heat treatment. Under the conditions of using 2.0 and 2.5 kJ of input energy, no phase transformation has been occurred. However, the hardness and tensile strength decreased and the elongation increased after a discharge due to a slight grain growth. By using more than 3.0 kJ of input energy, the electro discharge made a phase transformation and the hardness at the edge of the cross section increased significantly. The Ti rod before a discharge was lightly oxidized and was primarily in the form of $TiO_2$. However, the surface of the Ti rod has been instantaneously modified by a discharge into the main form of TiN from $TiO_2$. Therefore, the electro discharge can modify its surface chemistry in times as short as $200{\mu}sec$ by manipulating the input energy, capacitance, and discharging environment.

• 전기화학회지
• /
• 제5권1호
• /
• pp.13-16
• /
• 2002

Fullerene으로 수식된 PPy(Polypyrrole)전극 즉, graphite(Gr)/ppy, fullerene $(full^-)$항을 Gr/5mM PPy, 1mM $full^-,0.1M\;TBABF_4,\; CH_3CN/Pt$형의 전지로 전기화학 중합법으로 제작하였다. $(full^-)$의 생성속도는 기질전극 재료인 Pt/ppy, Pt, Gr 및 Au전극에 대해 각각 93.6, $7.0\times10^2,\;42.6$ 및 $1.3\times10^2cms^{-1}$였다. 수식되지 않은 Gr/ppy와 수식된 $Gr/ppy, full^-$ 전극에 대한 어드미턴스 값이 $1.7\times10^{-3}S$에서 $8.3\times10^{-3}S$로 5배나 증가하였으며, 전기 이중층의 용량은 $2.4\times10^{-5}\;F$에서 $4.2\times10^{-5}\;F$로 174배 증가하였다.

• 대한핵의학회지
• /
• 제33권6호
• /
• pp.527-536
• /
• 1999

목적: [C-11]flumazenil (RO 15-1788)은 벤조디아제핀 수용체 영상용 방사성 의약품으로 여러 가지신경, 정신 질환에서 양전자방출촬영(PET)용으로 연구되고 있다. 이 연구에서는2-amino 5-fluoroben-zoic acid를 출발물질로 사용하여 5단계에 걸쳐 플루마제닐 유도체를 합성한 후 F-18으로 표지하여 실험 동물에서의 성체 내 분포를 보았다. 대상 및 방법: 플루마제닐(c)의 합성은 F Hoffmann-La-Ro-che (Basle/CH)에서 보고된 방법에 의해 수정하여 합성하였다. 플루마제닐 유도체(d)는 플루마제닐(c)의 C-3 곁가지의 ethylester기를 tetrabutylammonium hydroxide와 반응하여 가수분해한 후 ditosylethane을 사용하여 tosyl기를 도입하여 합성하였다. 3-(2-[F-18]fluoro)flumazenil(e)의 합성은 TR-l3 사이클로트론에서 제조한 [F-18fluoride를 acetonitrile 용매하에서 플루마제닐 유도체(d)와 친핵성 치환반응으로 표지하였다. 표지된 플루마제닐 유도체는 TLC로 표지 효율을 측정하고, alumina-N과 $C_{18}$ Sep-pak으로 정제하였다. 3-(2-[F-18]fluoro)flumazenil의 생체 내 분포를 보기 위해 마우스(n=9)의 꼬31정맥으로 3-(2-[F-18]fluoro)flumazenil (0.37 MBq/0.1 mL)을 주사한 후 10, 30, 60분 후에 희생시켰다. 각 장기별 무게를 측정한 후 감마카운터로 방사능을 계수하였다. 투여한 방사능 양과 장기 내 방사능치를 구하여 시간에 따른 장기의 단위 무게별 주사량 대비 백분율(% ID/g)을 계산하였다. 결과: 플루마제닐 유도체 합성(d)의 전체 수득률은 40%였고, 플루마제닐 유도체의 F-18 표지효율은 66% 이상이었다. 마우스를 이용한 생체분포 실험에서 뇌의 섭취율은 10, 30, 60분에서 $2.5{\pm}0.4,\;2.2{\pm}0.3,\;2.1{\pm}0.1%ID/g$이었고, 혈액은 $3.7{\pm}0.4,\;3.3{\pm}0.1,\;3.3{\pm}0.09%ID/g$이었다. 결론: 새로운 벤조디아제 핀 수용체 영상용 방사성 의약품으로서 3-(2-[F-18]fluoro) flumazenil을 높은 표지 효율로 합성함으로서 PET와 SPECT 영상의 비교 연구에 이용될 수 있으며, F-18을 플루마제닐 유도체의 제각기 다른 위치에 치환함으로서 체내동태에 대한 연구에도 이용될 수 있다.