• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 II
• /
• pp.1394-1399
• /
• 2001

The purpose of this paper is that investigates the dynamic behavior characteristic of W.T.S(Wind Turbine System) and carries out the evaluation analysis during operating W.T.S. To investigate the dynamic behavior characteristic of W.T.S. the experiments to measure vibration of the blade from the attached accelerometer on the flap and edge section of the blade that is one of the most important elements of dynamic characteristic of W.T.S are performed. Natural frequency and mode shape are calculated with commercial program (STAR MODAL) using the measured vibration acceleration that receives the signal with F.F.T Analyzer from the accelerometer. For validation of these experiments. the finite element analysis is performed with commercial F.E.M Program (ANSYS) on the basis of the natural frequency and mode shape. The results indicate that experimental values have good agreements with the finite element analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1007-1009
• /
• 2004

This paper describes the design and the performance analysis of high speed induction motor considering end-ring using F.E.M.. To investigate the flux distribution, the induced rotor current, the designed high speed induction motor is analyzed by 3-D F.E.M.. Also, to identify the design specification, the performance characteristic is analyzed and estimated into the torque, the current and the output power at the static and the transient state.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.586-591
• /
• 2001

In the cold forging, elastic deformation of the die has been investigated to improve the accuracy of cold forged parts with F.E.M analysis using DEFORM, and with experiments using strain gauges. In the experiments, initial billet was selected to easily find the effect of elastic deformation according to the forging modes, extrusion and upsetting type, and only extrusion type. Elastic deformation of the die can be obtained by the signal from the strain gauges and this signal can be amplified by data acquisition system during the process. In the F.E.M analysis, two types of analysis are used to predict elastic strain of the die. To improve an accuracy of forged product and die dimension, this study compared with strain distribution between experiment and F.E.M analysis. As a result, the history of the deformation of the die and elastic recovery of forged product can be obtained by the elastic strain analysis of forged product and die according to the forging modes.

• 한국초전도ㆍ저온공학회논문지
• /
• 제2권2호
• /
• pp.26-31
• /
• 2000

This paper deals with finite element analysis of 2GVA superconducting generator which has slitted electrothermal shield in d-axis (SES). Three phase fault is considered torque of the S.C.G. Using the result, generator parameters are calculated by F.E.M. The results are compared with superconducting generator having conventional electrothermal shield (CES). The result shows that quick response excitation could be applied to superconducting generator with slitted electrothermal shield.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.58-60
• /
• 1998

This paper analyzes the torque characteristics with the structure of harmonic side drive motor using by F.E.M and conformal mapping method. F.E.M and conformal analysis result are almost same. Through the results, we investigate how do design parameters variation affect torque characteristics.

• 대한조선학회지
• /
• 제16권3호
• /
• pp.1-8
• /
• 1979

Various approaches to the analysis of stiffened plating in ship structures have been proposed by a number of researchers. Among them, the finite element method is known to be the most powerful method. However, for many parts of ship's structure having simple geometry and boundary conditions, the F.E.M. is often extravagant and unnecessary. In this paper, the authors have attempted to introduce the finite strip method which was proposed by Y.K. Cheung to avoid the difficulties involved in F.E.M. The results of calculations on the displacements and stresses in various plates with or without stiffeners were satisfactory, which shows the F.S.M. is useful for structural analysis of ship's plating.

• 한국공작기계학회논문집
• /
• 제18권2호
• /
• pp.162-169
• /
• 2009

This paper describes a study on dynamic characteristics analysis and dynamic compliance evaluation of a 5-axis multi-tasking machine tool of ram-head type. Structural dynamics analysis and evaluation are necessary to machine tool design and development to secure good machine tool performance against tough and harsh machining conditions. In this study, natural frequencies and corresponding vibration modes of the machine tool structure were analyzed by using both F.E.M. modal analysis and impulse hammer test. Furthermore, dynamic compliance of the machine tool was analyzed by using F.E.M. and also measured by using a hydraulic exciter test. Both the theoretical analysis and experimental test results showed good agreement with each other.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제51권7호
• /
• pp.331-338
• /
• 2002

An inverter-fed induction is driven by a harmonic voltage source so that it is necessary to be analysed by time-stepping F.E.M. But it takes so long time that disadvantageous to design. This paper presents a simple analysis method for inverter-fed induction motor using FEM and harmonic equivalent circuit. First, the rotor bar resistance and the leakage reactance are determinated by FEA for 1 slot region in rotor to consider the skin effect and the saturation. Secondly, the characteristic of the motor is analyzed by the harmonic equivalent circuits consisting of the obtained parameters from the FEA. This method is carried out to analyze an induction motor driven by the sinusoidal voltage and the inverter. The results are verified by comparing with those of the time-step F.E.A and the experiment.

• Journal of applied mathematics & informatics
• /
• 제36권5_6호
• /
• pp.567-574
• /
• 2018

Let $f:f(z)=z+{\sum^{{\infty}}_{n=2}}a_nz^n$ be analytic in the open unit disc E. Then f is said to belong to the class $M_{\alpha}$ of alpha-convex functions, if it satisfies the condition ${\Re}\{(1-{{\alpha})}{\frac{zf^{\prime}(z)}{f(z)}}+{{\alpha}}{\frac{(zf^{\prime}(z))^{\prime})}{f^{\prime}(z)}}\}$ > 0, ($z{\in}E$). In this paper, we introduce and study q-analogue of the class $M_{\alpha}$ by using concepts of Quantum Analysis. It is shown that the functions in this new class $M(q,{\alpha})$ are q-starlike. A problem related to q-Bernardi operator is also investigated.

• 한국미생물·생명공학회지
• /
• 제26권1호
• /
• pp.15-22
• /
• 1998

일반적으로 Streptomyces류는 성장이 늦고 유지가 어려운 반면, E. coli는 배양기간이 짧고 유전자 조작도 간편한 장점이 있기 때문에, E. coli를 이용하여 유용단백질을 생산하는 연구가 일반적인 흐름이다. 그러나 E. coli에서 외래유전자를 도입하여 대량으로 생산을 시키는 경우에 비용해성의 inclusion body를 형성하는 경우가 많으므로 용해성의 활성형 단백질을 생산하기 위하여는 여러 가지 조건을 고려하여야 한다. 본 논문에서는 aklavlnone 11-hydroxylase gene(dnrF)을 E. coli BL2l에서 발현시킬 때의 배양조건을 배양온도와 IPTG농도의 두가지 요소를 조합하여 변형시키는 방법으로, 활성형 단백질의 생산을 최대화하고 inclusion body의 형성을 최소화하는 배양조건을 조사하였다. 그 결과, 37$^{\circ}C$에서 배양했을 때에는 0.02mM의 IPTG를 첨가하였을 때 inclusion body를 가장 적게 만들고, 그에 따라 생산되는 효소활성도 가장 높았다. 반면, 28$^{\circ}C$로 배양온도를 낮추었을 때에는 0.06mM의 IPTG를 첨가하였을 때 aklavinone 11-hydroxylase효소가 최대로 생산됨을 SDS-PAGE 및 효소 활성측정으로 확인하였다. IPTG농도를 0.1 mM로 높인 경우에는 28$^{\circ}C$, 37$^{\circ}C$에서 모두 aklavinone 11-hydroxylase효소가 과발현되어 Inclusion body를 가장 많이 생성하였음을 알 수 있었다. 방선균에서 동일 유전자를 대량발현시키는 경우 발현된 단백질의 효소 활성은 있으나 SDS-PAGE상에서의 단백질의 관찰이 불가능하였고, 동시에 단백질의 정제시 효소활성이 소실되어 정제가 불가능하였다. 이러한 효소 활성의 소실의 원인은 세포내의 어떤 저분자물질일 것으로 추정되며 본 연구에서 제작한 antibody를 이용하면, 효소의 정제가 용이하게 수행될 것이다. 특히 대장균계에서의 활성형 효소의 최적발현조건에서 세포를 배양하거나, inclusion body의 refolding을 실시한 후, 항체를 이용한 Western blot assay를 지표로 효소를 정제하면, 미지의 cofactor의 정체도 밝혀지고 aklavinone 11-hydroxylase류의 효소 특성 연구에 큰 도움이 될 것이다. 또한 이 효소를 이용한 다양한 종류의 bioconversion을 실시하여 그동안 background 때문에 생성된 product의 검출이 불가능했었던 소량의 생성산물의 분석도 가능할 것으로 판단되어 금후의 bioconversion연구에 기대하는 바가 크다.