• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.11
• /
• pp.539-545
• /
• 2001

A simple analysis method for inverter-fed induction motor using F.E.M and harmonic equivalent circuit is proposed. And an optimum shape of rotor slot for 2Hp inverter-fed induction motor is determined by combining the proposed analysis method and an optimization algorithm. Conjugate gradient method is used for the optimization algorithm. The optimization is performed for higher efficiency and reduction of harmonic loss in the inverter-fed induction motor. The optimization results are verified by comparing with those of the time-step F.E.A.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1007-1009
• /
• 2004

This paper describes the design and the performance analysis of high speed induction motor considering end-ring using F.E.M.. To investigate the flux distribution, the induced rotor current, the designed high speed induction motor is analyzed by 3-D F.E.M.. Also, to identify the design specification, the performance characteristic is analyzed and estimated into the torque, the current and the output power at the static and the transient state.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.2
• /
• pp.63-72
• /
• 2008

As a part of abating formaldehyde emission of urea-formaldehyde (UF) resin adhesive, this study was conducted to investigate chemical structures of UF resin adhesives with different formaldehyde/urea (F/U) mole ratios, using carbon-13 nuclear magnetic resonance ($^{13}C$-NMR) spectroscopy. UF resin adhesives were synthesized at four different F/U mole ratios such as 1.6, 1.4, 1.2, and 1.0 for the analysis. The analysis $^{13}C$-NMR spectroscopy showed that UF resin adhesives with higher F/U mole ratios (i.e., 1.6 and 1.4) had two distinctive peaks, indicating the presence of dimethylene ether linkages and methylene glycols, a dissolved form of free formaldehyde. But, these peaks were not detected at the UF resins with lower F/U mole ratios (i.e., 1.2 and 1.0). These chemical structures present at the UF resins with higher F/U mole ratios indicated that UF resin adhesive with higher F/U mole ratio had a greater contribution to the formaldehyde emission than that of lower F/U mole ratio. Uronic species were detected for all UF resins regardless of F/U mole ratios.

• Progress in Superconductivity and Cryogenics
• /
• v.2 no.2
• /
• pp.26-31
• /
• 2000

This paper deals with finite element analysis of 2GVA superconducting generator which has slitted electrothermal shield in d-axis (SES). Three phase fault is considered torque of the S.C.G. Using the result, generator parameters are calculated by F.E.M. The results are compared with superconducting generator having conventional electrothermal shield (CES). The result shows that quick response excitation could be applied to superconducting generator with slitted electrothermal shield.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.58-60
• /
• 1998

This paper analyzes the torque characteristics with the structure of harmonic side drive motor using by F.E.M and conformal mapping method. F.E.M and conformal analysis result are almost same. Through the results, we investigate how do design parameters variation affect torque characteristics.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.162-169
• /
• 2009

This paper describes a study on dynamic characteristics analysis and dynamic compliance evaluation of a 5-axis multi-tasking machine tool of ram-head type. Structural dynamics analysis and evaluation are necessary to machine tool design and development to secure good machine tool performance against tough and harsh machining conditions. In this study, natural frequencies and corresponding vibration modes of the machine tool structure were analyzed by using both F.E.M. modal analysis and impulse hammer test. Furthermore, dynamic compliance of the machine tool was analyzed by using F.E.M. and also measured by using a hydraulic exciter test. Both the theoretical analysis and experimental test results showed good agreement with each other.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.2
• /
• pp.125-129
• /
• 2005

Two kinds of physical treatments were examined for the analysis both of intrinsic surface and interior nature of CuInS $e_2$[CIS] and CuGaS $e_2$[CGS] films grown in separated systems. For the first method, a selenium protection layer which was immediately deposited after the growth of the CIS was investigated. The Se cap layer protects CISe surface from oxidation and contamination during the transport under ambient atmosphere. The Se cap was removed by thermal annealing at temperature above 15$0^{\circ}C$. After the decapping treatment at 2$25^{\circ}C$ for 60 min, ultraviolet photoemission and inverse photoemission measurements of the CIS film showed that its valence band maximum(VBM) and conduction band minimum (CBM) are located at 0.58 eV below and 0.52 eV above the Fermi level $E_{F}$, respectively. For the second treatment, an Ar ion beam etching was exploited. The etching with ion kinetic energy $E_{k}$ above 500 eV resulted in broadening of photoemission spectra of core signals and occasional development of metallic feature around $E_{F}$. These degradations were successfully suppressed by decreasing $E_{k}$ below 400 eV. CGS films etched with the beam of $E_{k}$ = 400 eV showed a band gap of 1.7 eV where $E_{F}$ was almost centered.st centered.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.53-58
• /
• 2024

This study is about the technology convergence analysis of e-commerce related patents containing Artificial Intelligence applied for in Korea. The relationships between core technologies were analyzed and visualized using social network analysis. As a result of social network analysis, the core IPC codes that make up the mutual technology network in e-commerce related patents containing Artificial Intelligence were found to be G06Q, G06F, G06N, G16H, G10L, H04N, G06T, and A61B. In particular, it can be confirmed that there is an important convergence of data processing-related technologies such as [G06Q-G06F], [G06Q-G06N], and voice and image signals such as [G06Q-G10L], [G06Q-H04N], and [G06Q-G06T]. Using this research method, it is possible to identify future technology trends in e-commerce related patents and create new Business Models.

• Interdisciplinary Bio Central
• /
• v.4 no.1
• /
• pp.1.1-1.7
• /
• 2012

Background: The F-box proteins represent one of the largest families of proteins in eukaryotes. Apart from being a component of the ubiquitin (Ub)/26 S proteasome pathways, their regulatory roles in other cellular and developmental pathways have also been reported. One interesting feature of the genes encoding the proteins of this particular family is their variable selection patterns across different lineages. This resulted in the presence of lineage specific F-box proteins across different species. Findings: In this study, 48 non-redundant F-box proteins in E. siliculosus have been identified by a homology based approach and classified into three classes based on their variable C-terminal domains. A greater number of the F-box proteins have domains similar to the ones identified in other species. On the other hand, when the proteins having unknown or no C-terminal domain (as predicted by InterProScan) were analyzed, it was found that some of them have the polyglutamine repeats. To gain evolutionary insights on the genes encoding the F-box proteins, their selection patterns were analyzed and a strong positive selection was observed which indicated the adaptation potential of the members of this family. Moreover, four lineage specific F-box genes were found in E. siliculosus with no identified homolog in any other species. Conclusions: This study describes a genome wide in silico analysis of the F-box proteins in E. siliculosus which sheds light on their evolutionary patterns. The results presented in this study provide a strong foundation to select candidate sequences for future functional analysis.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.4
• /
• pp.285-294
• /
• 2013

The purpose of this study was to provide fundamental information for success factors of techniques through kinematic analysis including coordination of lower extremities and landing stability according to the success and failure of $540^{\circ}$ Dwihuryeochagi in Taekwondo. Twenty Taekwondo athletes: ten success group (S, age: $22.3{\pm}1.8$ yrs, height: $172.1{\pm}5.4$ cm, body mass: $64.4{\pm}4.2$ kg) and ten failure group (F, age: $22.3{\pm}1.8$ yrs, height: $172.1{\pm}5.4$ cm, body mass: $64.4{\pm}4.2$ kg) participated in this study. Three-dimensional motion analysis using a system of 3 video cameras with a sampling of 60 fields/s was performed during the competition of $540^{\circ}$ Dwihuryeochagi. Motions were divided into five events: pivot foot landing (E1), pivot foot toe off (E2), COM max height (E3), kick impact (E4) and landing (E5). At E1, the stride width was greater for S than for F (p<.05) while the time was greater for S than for F during P4 (p<.05). At E4, knee angle was greater for S than for F (p<.05). At E5, hip angle was greater for S than for F (p<.05) while kick distance was greater for S than for F (p<.05). Furthermore, at P3, the time would be related to kicking velocity (p<.05), while at P4, the time, range of hip angle and knee angle would be related to kick distance (p<.05). At P1, COM horizontal velocity would be related to COM vertical velocity of P1 and P2 (p<.05). Based on the findings, success factors of $540^{\circ}\acute{y}$ Dwihuryeochagi were COM horizontal velocity of P1, COM vertical velocity of P2, the time, kick distance, velocity, angle of lower extremities and coordination of P3-P4.