• FLOWER RESEARCH JOURNAL
• /
• v.19 no.2
• /
• pp.89-95
• /
• 2011

This study was conducted to improve commercial quality of cut spray chrysanthemums 'Charming Eye' and 'Pink Pride' bred in Korea by foliar application of daminozide, suppressing excessive elongation of peduncle caused by high temperature in greenhouse. Applications were made at two floral-bud-developmental stages and concentrations used were 0, 500, 1000, and $2000mg{\cdot}L^{-1}$. As for 'Charming Eye', cut flower length, peduncle diameter, stem diameter, flower bud diameter, and the number of flower buds did not show any significant difference among all treatments including control. However, the suppressing effect of peduncle elongation, widening angle of flower cluster arrangement on apical part, and increasing parallel flower buds in stage I showed better than those in stage II regardless of daminozide concentration. As for 'Pink Pride', cut flower length, peduncle diameter, and stem diameter did not show any significant difference among all treatments including control but angle of flower cluster on apical part increased compared to control as daminozide was sprayed at stage I and II except $2,000mg{\cdot}L^{-1}$ daminozide-sprayed at stage II. The number of flower buds and flower bud diameter showed the greatest increment through $1,000mg{\cdot}L^{-1}$ daminozide-sprayed at stage I and did the least values as sprayed with $2,000mg{\cdot}L^{-1}$ daminozide at stage II. Daminozide also gradually reduced peduncle length in a concentration-dependant manner but elongation of peduncle foliar-sprayed at stage I showed the more suppressing effect than that at stage II. Increasing the number of parallel flower buds showed the best results when sprayed with $2,000mg{\cdot}L^{-1}$ at stage I. In conclusion, we recommended that foliar spraying with $500-1,000mg{\cdot}L^{-1}$ daminozide at stage I and foliar spraying with $1,000-2,000mg{\cdot}L^{-1}$ daminozide at stage I improved cut flower quality of 'Channing Eye' and 'Pink Pride', respectively.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.5
• /
• pp.171-180
• /
• 2023

The three major sleep disorders in Korea are snoring, sleep apnea, and insomnia. Lack of sleep is the root of all diseases. Some of the most serious potential problems associated with sleep deprivation are cardiovascular problems, cognitive impairment, obesity, diabetes, colitis, prostate cancer, etc. To solve these problems, the Korean government provided low-cost national health insurance benefits for polysomnography tests in July 2018. However, insomnia patients still have problems getting treated in terms of time, space, and economic perspectives. Therefore, it would be better for insomnia patients to be allowed to test at home. The measuring device can measure six biosignals (eye movement, tossing and turning, body temperature, oxygen saturation, heart rate, and audio). A gyroscope sensor (MPU9250, InvenSense, USA) was used for eye movement, tossing, and turning. The input range of the sensor was in 258°/sec to 460°/sec, and the data range was in the input range. Body temperature, oxygen saturation range, and heart rate were measured by a sensor (MAX30102, Analog Devices, USA). The body temperature was measured in 30 ℃ to 45 ℃, and the oxygen saturation range was 0% for the unused state and 20 % to 90 % for the used state. The heart rate measurement range was in 40 bpm to 180 bpm. The measurement of audio signal was performed by an audio sensor (AMM2742-T-R, PUIaudio, USA). The was -42 dB ±1 dB frequency range was 20 Hz to 20 kHz. The measured data was successfully received in wireless network conditions. The system configuration was consisted of a PC and a mobile app for bio-signal measurement and data collection. The measured data was collected by mobile phones and desktops. The data collected can be used as preliminary data to determine the stage of sleep and perform the screening function for sleep induction and sleep disturbances. In the future, this convenient sleep measurement device could be beneficial for treating insomnia.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.2
• /
• pp.21-27
• /
• 2008

This paper describes a CMOS 16:1 binary-tree multiplexer(MUX) using $0.18-{\mu}m$ technology. To provide immunity for wide frequency range and process-and-temperature variations, the MUX adopts several delay compensation techniques. Simulation results show that the proposed MUX maintains the setup margins and hold margins close to the optimal value, i.e., 0.5UI, in wide frequency-range and in wide process-and-temperature variations, with standard deviation of 0.05UI approximately. These results represent that these proposed delay compensations are effective and the reliability is much improved although CMOS logic circuits are sensitive to those variations. The MUX is fabricated using $0.18-{\mu}m$ CMOS process, and tested with a test board. At power supply voltage of 1.8-V, maximum data-rate and area of the MUX is 1.65-Gb/s and 0.858 $mm^2$, respectively. The MUX dissipates a power of 24.12 mW, and output eye opening is 272.53 mV, 266.55 ps at 1.65-Gb/s operation.

• Fisheries and Aquatic Sciences
• /
• v.19 no.4
• /
• pp.18.1-18.10
• /
• 2016

In this study, to clarify the function of $PoPLC-{\beta}1$, in response to stress challenge, we examined the $PoPLC-{\beta}1$ expression pattern in response to external stress (pathogen-associated molecular pathogen challenge and environmental challenge including temperature and salinity). $PoPLC-{\beta}1$ expression analysis of tissue from olive flounder showed that the messenger RNA (mRNA) was predominantly expressed in the brain, heart, eye, liver, spleen, and stomach. We also tested the mRNA expression of the $PoPLC-{\beta}1$ in the spleen and kidney of olive flounder by RT-PCR and real-time PCR following stimulation with lipopolysaccharide (LPS), concanavalin A (ConA), or polyinosinic:polycytidylic acid (PolyI:C) and compared with the inflammatory cytokines IL-1b and IL-6 in the stimulated flounder tissues. Each of the spleen and kidney and mRNA transcripts of $PoPLC-{\beta}1$ were increased 30- and 10-fold than normal tissue at 1-6 h post injection (HPI) with PolyI:C when the expression of $PoPLC-{\beta}1$ transcript was similar to LPS and ConA. We also tested the expression of $PoPLC-{\beta}1$ in response to temperature and salinity stress. The expression of $PoPLC-{\beta}1$ also was affected by temperature and salinity stress. Our results provide clear evidence that the olive flounder $PLC-{\beta}1$ signal pathways may play a critical role in immune function at the cellular level and in inflammation reactions. In addition, $PLC-{\beta}1$ appears to act as an oxidative-stress suppressor to prevent cell damage in fish.

• Journal of Technologic Dentistry
• /
• v.13 no.1
• /
• pp.27-31
• /
• 1991

The purpose of this study was to evaluate the effect of curing time and curing temperature on the hear - Curing of acrylic resin using ring furnace. Specimens were fabricated from 2 kinds(Laboron, Bertex) heat-cured resin. Total 200 samples were divided into 4 groups(70$^{\circ}C$, 100$^{\circ}C$, 13$^{\circ}C$, 150$^{\circ}C$) and each group was divided into 5 small groups(30 min., 45min., 60min., 75min., 90min.). A microscope(Olympus Coll Co. Japan) was used to examine a randomly selected central zone, midzone and surface for each complete specimen. The results of the experiment were as follows : 1. To obtain non-polymerzation, cure the resin for 30 minutes at 70$^{\circ}C$ and 100$^{\circ}C$ in a ring furnace. 2. To obtain with porosity, cure the resin for 45 minutes, 60 minutes and 75 mintes at 70$^{\circ}C$ and for 90 minutes at 150$^{\circ}C$ in ring furnace. Porosity appears in Laboron for 30 minutes, 45 minutes at 150$^{\circ}C$ in a ring furnace. 3. Every other specimens connot get a sight of special problem with makes eye in the made surface.

• Fashion & Textile Research Journal
• /
• v.15 no.4
• /
• pp.635-641
• /
• 2013

This study examined the dye-properties of natural fabrics dyed with Coptis chinensis and Curcuma longa root fermented with fungi. The optimum culture conditions for the fermentation of microorganisms, the relationship between natural dye color and fermentation conditions were investigated. Two different medical herbs (ground to 80-100 mesh in size) were used as a natural dyeing source. Phellinus linteus (P. linteus), which can grow in different media, such as Agarmedium (only agar containing medium), maltose extract agar (MA) and potato dextrose extract agar (PDA) culture media, were isolated from the medium. P. linteus was confirmed to be the optimum microorganism for the fermentation of Coptis chinensis and Curcuma longa, and the MA medium was confirmed to be the best for culturing. When using the microorganism as the fermenting agent, $32^{\circ}C$ was found to be the optimum fermenting temperature for both natural colorants. Regarding the dyeing property of the fermented natural dye, silk was dyed quite darkly in an appearance by naked eye estimation and the K/S value in the color strength of silk reached a high level of 16 after the fermenting process. The washing fastness of dyed silk after treatment washing was reduced from 4 to under4 and indicates that dyed silk with fermented plant was not unsubstantial. The light fastness was 1 to 2, showing intended to maintain due to the fermentation process.

• 보존과학연구
• /
• s.29
• /
• pp.221-238
• /
• 2008

Roofing tiles are very important archaeological artifacts which show science, architecture of that time, as well as information about the culture. It has been studied by many researchers steadily, but only focusing on archaeological, art historical and architectural study, so it is very difficult to find natural science research. Gyeongbokgung's roofing tiles were excavated from the ruins of same site, however glaze, body colour and shape of tiles are very diverse with the naked eye. Through natural science research which analyze the chemical composition and physical characteristics of roofing tiles's body and glaze examine the physical and chemical characteristics of each roofing tiles. the result of analazed roofing tiles is following. when roofing tiles were classified by 전암대자율 and chromaticity, each group has part of some matches. When you compare with green gazed traditional brick's glaze of Silla period, Gyeongbokgung roofing tiles have more $Al_2O_3$ and less PbO than Silla period's. We can see the technology of increasing firing temperature is better. and glaze colour depends on content of $Fe_2O_3$ and CuO. A lot of CuO tend to be more blue.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.69-77
• /
• 2016

We propose nano-scale Cu direct bonding technology using ultra-high density Cu nano-pillar (CNP) with for high stacking yield exascale 2.5D/3D integration. We clarified the joining mechanism of nano-scale Cu direct bonding using CNP. Nano-scale Cu pillar easily bond with Cu electrode by re-crystallization of CNP due to the solid phase diffusion and by morphology change of CNP to minimize interfacial energy at relatively lower temperature and pressure compared to conventional micro-scale Cu direct bonding. We confirmed for the first time that 4.3 million electrodes per die are successfully connected in series with the joining yield of 100%. The joining resistance of CNP bundle with $80{\mu}m$ height is around 30 m for each pair of $10{\mu}m$ dia. electrode. Capacitance value of CNP bundle with $3{\mu}m$ length and $80{\mu}m$ height is around 0.6fF. Eye-diagram pattern shows no degradation even at 10Gbps data rate after the lamination of anisotropic conductive film.

• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.129-140
• /
• 2006

There are need to develop of merchandise of value added fresh ginseng because of high consciousness level of consumer and enlarge of markets for high quality products. The fresh ginseng after harvest was distributed to farmer partually but in general, it was to market by consigner or wholsaler directly after harvest. There were a high difference on storage period of fresh ginseng in different harvesting seasons. The reduction of value of commodities of fresh ginseng for storage period was caused by decomposition and tender of tissue. The storage temperature was under the freezing point and the packing method was sealing tightly by plastic film. As the quality of fresh ginseng was defined by naked eye, it was difficult to sort the quality of ginseng directly harvest.

• Transactions of Materials Processing
• /
• v.18 no.8
• /
• pp.633-639
• /
• 2009

Remarkable progress had been made in both technology and production of optical elements including aspheric lens. In the past, precision optical glass lenses were produced through multiple processes such as grinding and polishing, but mass production of aspheric lenses requiring high accuracy and having complex profile was rather difficult. Against such a background, the high-precision optical GMP process was developed with an eye on mass production of precision optical glass pasts by molding press. This GMP process can produce with precision and good repeatability special form lenses such as for cameras, video cameras, aspheric lenses for optical items. In this study, Design Of Experiment(Taguchi method) was adopted to find a tendency of molding conditions that influence formability. Three main factors for molding conditions were selected based on pressure at pressing stage and temperature, pressure at cooling stage. Also, the DOE was carried out and the interference patterns were measured to evaluate the formability of GMP process. From the results, it was found that the cooling pressure is the most sensitive parameter for progressive GMP process.