• Journal of Ginseng Research
• /
• v.40 no.3
• /
• pp.229-236
• /
• 2016

Background: Extraction conditions greatly affect composition, as well as biological activity. Therefore, optimization is essential for maximum efficacy. Methods: Korean Red Ginseng (KRG) was extracted under different conditions and antioxidant activity, extraction yield, and ginsenoside Rg1 and phenolic content evaluated. Optimized extraction conditions were suggested using response surface methodology for maximum antioxidant activity and extraction yield. Results: Analysis of KRG extraction conditions using response surface methodology showed a good fit of experimental data as demonstrated by regression analysis. Among extraction factors, such as extraction solvent and extraction time and temperature, ethanol concentration greatly affected antioxidant activity, extraction yield, and ginsenoside Rg1 and phenolic content. The optimal conditions for maximum antioxidant activity and extraction yield were an ethanol concentration of 48.8%, an extraction time 73.3 min, and an extraction temperature of $90^{\circ}C$. The antioxidant activity and extraction yield under optimal conditions were 43.7% and 23.2% of dried KRG, respectively. Conclusion: Ethanol concentration is an important extraction factor for KRG antioxidant activity and extraction yield. Optimized extraction conditions provide useful economic advantages in KRG development for functional products.

• The Korea Journal of Herbology
• /
• v.29 no.6
• /
• pp.1-6
• /
• 2014

Objectives : This study was aimed to compare Gyejibokryeong-hwan (GBH) decoctions produced using different pressure levels for various extraction times to find the optimal extraction conditions through extraction yield, total soluble solids content (TSSC), hydrogen ion concentration (pH), and the contents of chemical compounds. Methods : Decoctions of GBH were prepared under the pressure levels of 0 or $1kgf/cm^2$ for 30-180 min using water as extraction solvent. The extraction yield, TSSC, and pH were measured, and the amounts of the chemical compounds were determined using high performance liquid chromatography-photodiode array detector. Results : The higher pressure and longer extraction time increased the values of TSSC and extraction yield, while decreased the pH value. The decoctions produced in 180 min by pressurized method and produced in 150 min by non-pressurized method showed maximum values of extraction yield and TSSC with minimum value of pH. The amounts of chemical compounds showed variations in pressurized and non-pressurized decoction during overall extraction times. The influences of pressure and extraction time on extraction yield, TSSC, pH, and the contents of chemical compounds were confirmed by regression analysis, which showed that all extraction values were significantly affected by at least one of two extraction factors, pressure and extraction time. Conclusions : This study suggests that the pressure and extraction time can significantly affect the extraction efficiency of components from GBH decoctions. However, optimal extraction conditions could not be chosen due to the variation of the amounts of chemical compounds.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.2
• /
• pp.409-416
• /
• 1999

Microwave extraction system equipped with closed vessels was applied to confirm its capability of extracting ginseng solubles including saponin, which was monitored to optimize extraction con ditions by response surface methodology. Total yield increased with the decrease in particles size and more extraction steps. Soluble components were completely extracted by operating the system within 6 min per one step, which should be repeated by 3 or 4 times. Optimized conditions for maxi mum extraction of response variables(total yield, crude saponin) were 40~50% of ethanol concentration, about 140oC of extraction temperature, and within 6 min of the extraction time. The extraction effi ciency of total yield was dependent on the decrease of ethanol concentration, while crude saponin content was favored on the higher degree of ethanol concentration. According to the temperature guideline, below 90oC of extraction temperature, the optimal ranges of extraction conditions were predicted as 30~50% of ethanol concentration and 2.5~6.5 min of extraction time. Estimated values of total yield and crude saponin were in good agreement with experimental values.

• Archives of Pharmacal Research
• /
• v.25 no.4
• /
• pp.453-456
• /
• 2002

Tonin(Persicae Semen) is the herb medicine that contains amygdalin as a major ingredient. Amygdalin in water is decomposed into benzaldehyde, HCN, and glucose by emulsin, a hydrolysis enzyme in tonin. A useful and practical method for the optimum extraction condition of amygdalin without enzymatic hydrolysis is required. The extraction yield of amygdalin of natural formula to nin was 0.1 % from crude powders, 1.4% from small pieces, 3.5% from half pieces and 2.4% from whole pieces. The extraction yield of amygdalin of outer shell-eliminated to nin was 0.3% from crude powders, 1.4% from small pieces, and 3.5% from half pieces and whole pieces respectively. The extraction yield of amygdalin was most high when using the size larger than half.

• The Journal of Korean Medicine
• /
• v.34 no.4
• /
• pp.12-20
• /
• 2013

Objectives: This study compared Gumiganghwal-tang (GGT) decoctions produced using different pressure levels for various extraction times to determine the optimal extraction conditions through hydrogen ion concentration (pH), total soluble solids content (TSSC), extraction yield, and content of chemical compounds. Methods: Decoctions were prepared by the pressure levels of 0 or $1kgf/cm^2$ for 30-180 min. The pH and TSSC were measured, the extraction yield was calculated, and the amounts of the chemical compounds were determined using high performance liquid chromatography. Results: The higher pressure and longer extraction time decreased the pH value, while those conditions increased TSSC and extraction yield: the decoction produced in 180 min by pressurized method showed the minimum value of pH, but maximum values of TSSC and extraction yield. The chemical compounds showed higher amounts in decoctions produced by non-pressurized methods than pressurized methods and their amounts were decreased over the peak extraction time in both pressurized and non-pressurized methods. The results of regression analysis confirmed the correlative influences of the pressure and extraction time on pH, TSSC, and extraction yield. Conclusions: This study suggests that pressure and extraction time influence the compositional constituents in GGT decoctions, and the non-pressurized method for 120 min should be chosen as the optimal extraction condition for the preparation of GGT decoction.

• Applied Chemistry for Engineering
• /
• v.29 no.3
• /
• pp.325-329
• /
• 2018

In this study, polyphenols were extracted from Angelica, which are known to have a high antioxidant content and the extraction process was optimized using the response surface methodology. The extraction yield and the total polyphenols were set as response values for the methodology. Quantitative factors in the extraction process were the extraction time, volume ratio of alcohol/ultrapure water, and extraction temperature. When considering both the main and interaction effects, the greatest influence factor on the extraction yield and total polyphenols was the extraction time. The optimum extraction time and temperature and alcohol/ultrapure water volume ratio for angelica were 2.8 h, $56.6^{\circ}C$ and 64.0 vol% respectively. The extraction yield and total polyphenols when using the conditions were calculated to be 24.6% and 8.76 mg GAE/g. respectively. Determination coefficients of regression equations for the extraction yield and total polyphenols were 81.4 and 75.4%, respectively. Also the overall satisfaction level was found to be 0.80 and the significance was confirmed within 5%.

• KSBB Journal
• /
• v.29 no.1
• /
• pp.22-28
• /
• 2014

In this study, we investigate the effect of pretreatment method on lipid extraction from Enteromorpha intestinalis using physical, thermo-chemical, and enzymatic process such as ultrasonication, high temperature treatment, freezing, microwave irradiation, osmotic shock, pH shock, homogenizing, and enzymatic treatment. In pretreatment with separated lipid extraction, the high extraction yield was obtained by high temperature treatment ($121^{\circ}C$ for 5 min) with 0.1 N HCl, which is 1.4 times higher than that of control. In pretreatment with direct lipid extraction, the high extraction yields were obtained by 0.1 N HCl pretreatment, microwave irradiation (700W, 1 min with twice), and 10% NaCl pretreatment, which is 1.45 times higher than that of control. In the result of enzymatic pretreatment with 17 kinds of enzymes, Cellic CTec II showed the high extraction yield of 5.3%, and which is 1.9 times higher than that of control. Moreover, the extraction yield was increased by the increase of enzyme amounts. In 10% enzyme amount, about 5.8% yield was obtained.

• Journal of Life Science
• /
• v.20 no.11
• /
• pp.1691-1696
• /
• 2010

Neohesperidin is a natural new nutrition sweetener, widely existing in plants of dry citrus peel, which can be derived from extraction. Since the sweetness is 1,300-1,500 times greater than that of sugar, neohesperidin are widely used in fruit juices, wines, beverages, bakeries and pharmaceutical formulations, and are particularly suitable for consumption by diabetic patients. However, the yield of extraction from citrus peel waste is very low. In this study optimal yield conditions were determinedusing response surface methodology (RSM) in order to increase the neohesperidin extraction yield. The critical factors for maximum extraction yield were selected extraction pressure ($x_1$), extraction time ($x_2$), and concentration of ethanol ($x_3$). As a result, the extraction yield was improved when the extracting pressure increased. The extraction yield also increased in a time-dependent manner. When adding ethanol as an assistance solvent to the supercritical carbon dioxide, extraction yield was increased as more ethanol concentration was added. Finally, the extraction yield of neohesperidin was improved to about 162.22% compared to ethanol extraction as a conventional method.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.9
• /
• pp.1351-1357
• /
• 2016

Green tea (Camellia sinensis) seed extract (GTSE) was prepared under various pretreatment conditions and used to investigate its extraction yield and anti-yeast activity. Anti-yeast activity of GTSE from seeds with or without the coats was the same, whereas the extraction yield was slightly higher in extract from seeds without the coat. Anti-yeast activity of GTSE from seeds with different water contents or particle sizes was the same, whereas the extraction yield was highest in extract from seeds with 7.3% moisture or a smaller particle size. Anti-yeast activity of defatted green tea seed extract (DGTSE) was the same as that of GTSE. Extraction yield was higher in DGTSE from defatted seeds by the oil press machine compared to hexane extraction. Defatted green tea seed (DGTS), a by-product from the oil extraction process, is a good natural source of anti-yeast preservative. The extraction yield and anti-yeast activity of DGTSE were investigated using various extraction solvents, temperatures, and times. The results show that water was an economic extraction solvent, and anti-yeast activity of DGTSE was unstable at $90^{\circ}C$. These results suggest that water, extraction temperature of $50^{\circ}C$, and extraction time of 4 h were the most efficient for extraction of anti-yeast compounds from DGTS.

• Preventive Nutrition and Food Science
• /
• v.7 no.3
• /
• pp.317-319
• /
• 2002

Exo-polygalacturonase (EPG) from Rhizopus sp. was applied to the extraction of alginic acid from sea mustard to increase extraction yield. EPG digestion was examined under distinct conditions within temperatures from $25^{\circ}C$ to 5$0^{\circ}C$, pH 5 to 9, and treatment times from 0 to 36 hr. The optimal conditions fur alginic acid extraction with EPG were: pH 7.0 at 3$0^{\circ}C$ for 24 hrs. The EPG hot water extraction yield was 3.4 times higher yield than hot water extraction alone. Using EPG to extract alginic acid from sea mustard should be considered a viable alternative to conventional extraction, with the advantage of reducing hazardous wastes such as strong acid and alkali solutions.