• Journal of Conservation Science
• /
• v.32 no.4
• /
• pp.521-534
• /
• 2016

Ancient tombs are typically comprised of confined rooms, which have different spatial characteristics than the external environment because they are covered by heavy layers of soil. In this study, we examined the thermal energy flow from the outside to inside of Songsan-ri tomb No. 6. External heat flows slowly to the inside because of heavy soil layer, and the presence of several rooms and entrances. For this reason, it takes about two months for the air temperature to travel from the outside to the inside of the tomb. Interestingly, the gradational inflow of thermal energy from outside the tomb leads to delicate horizontal and vertical variations in the wall temperature. These micro-environmental differences occur in the inner tomb every year, so we can expect them to cause condensation with regularity. In addition, we show that the previously installed forced circulation air conditioning system risks fatal damage to the mural wall painting. The results of this research suggest an optimal air conditioning system and optimized space planning to conserve Songsan-ri tomb No. 6 and its mural painting.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.4
• /
• pp.1-13
• /
• 2017

This thesis aims to research the original landscape of an area in Chirwon by comparing and interpreting the current and the former landscape of the time around 1860, in which was created. Inside the painting, MuGi-YeonDang(舞沂蓮塘), its nearby garden facilities and landscape are described. The conclusions of the research are as follows. Around the inner garden(內園) called Gukdam(菊潭), core spaces of Mugi-YeonDang were Hahwanjeong(何換亭) and Pungyongnu(風浴樓). After 1971, Chunghyosa(忠孝祠), Yeongjeonggak(影幀閣) which was built as inheritance of Giyangseowon (沂陽書院), and other buildings were added. On the opposite of Hahwanjeong, there is a designed pond inside Gukdam, in which three pieces of bizarre stones and colorful flower plants and trees reside. In the middle of the pond, there is an center island(中島), constructed with Bonghwangseok(鳳凰石) and Napduseok(衲頭石). Two different kinds of trees are settled on top of the stones, and one of them is identified as a maple. In the external scenery(外境), Jakdaesan Mountain and Cheonjusan Mountain are located at the upper part of Mugi-Yeondang, and Bibo Forest(裨補林), which does not exist anymore, was located at the lower part of it. A notable achievement in own research was to discover the Ju family's graveyard(朱氏墓群) consisted of more than 10 murals at the lower part of Mt. Jakdaesan in the outer space and the remains of 'Byeoreop(別業) Yuhoejeong(有懷亭)' at the nearby Sanjeong-ri(山亭里) area, which was the Ju family's gravesite(Seonsan, 先山). The discovered remains showed the presence of a square pond(方塘) and an island in the center of it(中島) in the form of Seokgasan(an artificial mountain made with stones), a stone monument called Mangchudae(望楸臺), etc. The Seokgasan was consisted of processed natural stones, and layers of the stones were piled up for it. On the side of the layered stones, 'Gyeongam(敬嵒)' and 'Sesim(洗心)' are engraved. Especially, Gyeongja(letter Gyeong, 敬字) is a copy of the Gyeongja Rock(敬字岩) of Sosu-Seowon(紹修書院), which is a symbolic garden language mutually used in the signboards of Pungyongnu and Musansa(武山祠), a place built to enshrine Ju, Sebung(周世鵬). Through the written names of the building found in , it can be assumed that the name of the square pond with Seokgasan was Taehwaji or Jeongwudang, and the name of the Seokgasan was Sogeumgang(小金剛) or Sobangjang(小方丈). The names correspond to the names of the Seokgasan of Gukdam, which was Yangsimdae(養心臺) and Bongnaesan(蓬萊山). By means of the corresponding names, it can be inferred that the relations between the spaces were intended. was originally created as 'a manor painting(莊園圖)', led by the 15th generation of the Ju family who moved into Chirwon-ri, Haman. The painting describes not only the back garden but also the external scenery, thus it provides important evidences for understanding Mugi-YeonDang and its nearby landscape, and is helpful to its maintenance and restoration.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.7
• /
• pp.578-583
• /
• 2001

The bushing for high voltage and large and power should endure weight of itself and force of pushing from contact with circuit breaker. Like this, epoxy mold bushing has to be strong without fault. However, the external circumstances and internal factors was caused by partial discharge, flashover and dielectric breakdown. Therefore, to remove external factor of defect and to prevent the internal cracks and cavity generated from the contraction on interface of Cu-Epoxy, we should form semi-conductive layer on Cu bar by carbon. Then, the PD properties and the insulation qualities of epoxy mold type bushing was able to improved by roles of cushions for the direction of diameter and by effects fo natural sliding like as separated from conductor for the direction of length. So, in this work, we could prove the method of semi-conductive layer in making the long conductor.

• Journal of Conservation Science
• /
• v.31 no.4
• /
• pp.403-409
• /
• 2015

Malachite and Azurite are the typical copper system pigments which used the mural paintings since ancient times. The mural painting is at risk for damages of the painting layer by atmosphere gas because it is exposed at external environment. In this study, it did experiment about an effect to Malachite and Azurite by environmental pollution gas($NO_2$, $CO_2$, $SO_2$) then analysis and estimate about test for pieces using mural painting colored that two pigments. As a result, Malachite and Azurite were changed on $NO_2$ but not changed $CO_2$ and $SO_2$. Especially as the concentration of $NO_2$ is increased, exfoliation of the pigment layer weave remarkably formed pores on the pigment particles on SEM, the phenomenon to be pieces were observed together with smaller particles. In the case of Malachite that were exposed to $NO_2$ gas, new compounds(Rouaite : dicopper (nitrate(V) trihydroxide, $Cu_2(NO_3)(OH)_3$)) was appeared by XRD analysis. Therefore, there had been able to verify the fact that the cause exfoliation and discoloration phenomena accompanied by chemical changes for Malachite and Azurite.

• Corrosion Science and Technology
• /
• v.7 no.5
• /
• pp.265-268
• /
• 2008

Prestressed Concrete Cylinder Pipe(PCCP) had became one of the dominating kinds of pipes substituting for steel pipes because of its unique feature (high intensity, high pressure and high leakproofness). PCCP was produced firstly by Bonna company in France. By the end of 20th century, there were over 19000 km of this product installed in America. PCCP was introduced from Ameron company by Shandong Eletric Power Pipeline Engineering Company in 1988. As the statistical data in 2002, 700 km of PCCP had been applied in China, and the application trended towards rapid increase.Since prestressing wire would be corroded in environment, Several accidents due to the breakdown of pipe had happened. Consequently the external wall of pipe should be covered with protective coatings. There was a lack of technical study in corrosion and control of PCCP, because PCCP had been applied for a short time in China. in order to ensure the service life of PCCP, we have developed a kind of protective coating for concrete pipe, which had high intensity and anti-corrosive property with convenient applicability. The physical and chemical properties, painting technology and field application of this coating was introduced in the paper, at the same time, the future of external protective coating for PCCP was looked into.

• Journal of architectural history
• /
• v.29 no.3
• /
• pp.7-14
• /
• 2020

It can be meaningful that this study attempted to analyze the use cases and forms based on the literature on the painting walls of the J oseon Dynasty, and attempted basic research to prevent disaster damage using traditional elements. This study summarizes the use of the Hwabangbyeok wall of J oseon Dynasty as follows. First, Hwabangbyeok wall was used from the early J oseon Dynasty and was adopted by palaces and other major state facilities to cope with fire and theft. Second, the Hwabangbyeok Wall was also referred to as the wall below the lower part of the wall, and was constructed with the purpose of preventing disasters from outside. Third, in an analysis of the Daeseongjeon shrine of Hyanggyo, many construction cases were identified mainly in the Gyeonggi area, which is assumed to be based on production and construction conditions along with local climatic factors. Fourth, it can be said that the Hwabangbyeok wall was basically adopted to prevent comprehensive disaster risk reduction in case of external intrusion and fire.

• The Research Journal of the Costume Culture
• /
• v.12 no.5
• /
• pp.721-736
• /
• 2004

The aim of this study is to clarify aesthetic values and sociocultural meanings that reappears in contemporary fashion. In order to analyze aesthetic values and symbolic meanings of body decoration, I examined the concepts and expression methods of the body decoration. Also, analyzed external characteristics of expression and its internal meanings that applied in modern fashion. The expressions of body decoration represented in contemporary fashion are classified into direct and indirect methods. The direct method is expressed by tattoos, piercing, henna, make-up and body painting. And, indirect method is expressed by see-through look, body-conscious look and accessories that were utilized its patterns and the material adaptation methods. Such expression of body decoration in the modern fashion was represented into grotesque images and erotic images. The characteristics of grotesque images are abnormal state, hateful animal image and distorted or transformed body and the internal meanings are the pursuit of primitive, exoticism, the pursuit of playfulness, and resistance. The characteristics of erotic images are an exposure of body, see through, body-conscious and androgynous look and the internal meanings are the self-intoxication, naturalism and sexual pleasure.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.535-538
• /
• 2008

Insert-injection molding can inject two different materials or two colors in the same mold and process. If this injection process use, product has ability because the base part maintain strength and specified part can inject soft-material. It makes the cost down by single operation automatically for saving wages. In this paper, we designed double-injection mold for automobile remote control to inject secondary using this part as insert after inject external appearance of product. CAE analysis was progressed gate location and runner size as variable and analysis result is reflected in mold design process. As a result, it could solved badness that is generated at the conventional mold. Additionally, cost is downed by reducing loss of runner as well as could omit painting process because surface of finished product is improved through new mold.

• Journal of Science of Art and Design
• /
• v.11
• /
• pp.201-220
• /
• 2007

From two viewpoints the writer investigated the beauty of space by overall arrangement and composition of a picture in Oriental painting. In particular, she examined the expanded representation and significance of space use which had not properly been recognized in the field of a colored picture contrary to a painting in India ink. She studied that the boundary for the representation and appreciation of space was unlimited to one field of painting by studying and analyzing it in connection with other fields of art which had something in common with it in techniques or languages of representation. The writer considered the aspects of similar forms and spirits as the methods of understanding and representing the essence of an object in creating a work. She generally considered the aspect of perfecting knowledge by studying the principle of an actual thing for the representation of revealed forms corresponding to the aspect of similar forms, and tried to reach the stage of 'materialization' united with the spirit of the subject of creation for the formless forms corresponding to the aspect of representing an artist's inner world as well as the external shapes of things. She tried to reach the stage of spiritual cultivation in pursuit of the boundary between 'mental vanity' and 'sitting quietly and attaining the state of perfect selflessness', which were presented by Chuang-tzu, to express the spirituality internal to it. She recognized that the projection of the cultivation on a work could convey internal essence as well as external forms to a picture. It was because the image of the form represented in a picture was based on the aesthetic experience got from realty. In the concept of space and a method of representing it, she explored and analyzed the basic concept of space, arranged the concept of space shown in Oriental ideas dividing it into the concepts of space in Confucianism, Taoism and the Zen sect. What she felt acutely through this study was that she should establish the identity of her work by succeeding to, changing and re-creating tradition based on the historical heritage left by successive excellent painters and theorists. Putting together all these things showed that establishing the identity in the world of work pursued and oriented by her required searching the direction in future works by mixing tradition with modern times in a creative way, which is just the purpose of study in this thesis.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.7
• /
• pp.677-685
• /
• 2005

Life Cycle Assessment(LCA) and Design for Environment(DfE) method were applied to design the environmentally sound manufacturing process of f31k lift in this study. Not only external movement of LCA and DfE method in the legal and systemic phase, but also active researches of those in the development phase of case study and application to the industrial field, have been going on. In concretely, the manufacturing processes of the folk lift generating the most environmental impact were examined by applying LCA method, and the environmentally sound manufacturing process was designed by applying, DfE method to the processes. As the results of LCA, environmental impacts for the eco-toxicity and human toxicity of seven major environmental categories were in high value, and so be in the cutting & welding process and painting process among the manufacturing processes. High solid paints, increasing the solid content of the existing solvent paints used in painting process, were developed to reduce the environmental impacts generated in the painting process. By utilizing the high solid paints, about 20% of environmental impacts (as environmental index of LCA) could be reduced.