• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.11
• /
• pp.1175-1180
• /
• 2014

This paper proposes a new technique that produces improved local information using a low-cost GPS/INS system combined with Extended Kalman Filter and Path Planning when a Quad-rotor flies. In the research, a low-cost GPS is combined with INS by Extended Kalman Filter to improve local information. However, this system has disadvantages in that estimation accuracy is getting worsens when the Quad-rotor flies through the air in a curve and precision of location information is influenced by performance of the used GPS. An algorithm based on Path Planning is adopted to deal with these weaknesses. When the Quad-rotor flies outdoors, a short moving path can be predicted because all short moving paths of quad-rotor can be assumed to be straight. Path planning is used to make the short moving path and determine the closest local information of data of the GPS/INS system to location determined by path planning. Through the foregoing process, improved local data is obtained when the quad-rotor flies, and the performance of the proposed system is verified from various outdoor experiments.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.7
• /
• pp.711-719
• /
• 2010

Heliostat, as a concentrator reflecting the incident solar energy to the receiver located at the tower, is the most important system in the tower-type solar thermal power plant, since it determines the efficiency and performance of solar thermal plower plant. Thus, a good sun tracking ability as well as its good optical property are required. In this paper, we propose a method to compensate the heliostat sun tracking error. We first model the sun tracking error, which could be measured using BCS (Beam Characterization System), by multilayered neural network. Then the extended Kalman filter was employed to train the neural network. Finally the model is used to compensate the sun tracking errors. Simulated result shows that the method proposed in this paper improve the heliostat sun tracking performance dramatically. It also shows that the training of neural network by the extended Kalman filter provides faster convergence property, more accurate estimation and higher measurement noise rejection ability compared with the other training methods like gradient descent method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.11
• /
• pp.1681-1690
• /
• 2013

In this paper, a design of speed and position controller based on the EKF(Extended Kalman Filter) for sensorless control in IPMSM(Interior Permanent Magnet Synchronous Motor) is proposed. The proposed method subdivides the state estimation interval for improving the accuracy of state estimation. and each subdivided interval estimated first order term using Taylor series. The proposed state estimator comparison with the second-order extended Kalman filter reduced calculation amount of a priori estimation. And the simulation results were proved that The accuracy of priori estimation is increased.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.1016-1026
• /
• 2017

An adaptive extended Kalman filter based on the maximum likelihood (EKF-ML) is proposed for detecting voltage sag in this paper. Considering that the choice of the process and measurement error covariance matrices affects seriously the performance of the extended Kalman filter (EKF), the EKF-ML method uses the maximum likelihood method to adaptively optimize the error covariance matrices and the initial conditions. This can ensure that the EKF has better accuracy and faster convergence for estimating the voltage amplitude (states). Moreover, without more complexity, the EKF-ML algorithm is almost as simple as the conventional EKF, but it has better anti-disturbance performance and more accuracy in detection of the voltage sag. More importantly, the EKF-ML algorithm is capable of accurately estimating the noise parameters and is robust against various noise levels. Simulation results show that the proposed method performs with a fast dynamic and tracking response, when voltage signals contain harmonics or a pulse and are jointly embedded in an unknown measurement noise.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.12 no.3
• /
• pp.238-244
• /
• 2012

A modeling of vision based robot formation control system using fuzzy logic controller and extended Kalman filter is presented in this paper. The main problems affecting formation controls using fuzzy logic controller and vision based robots are: a robot's position in a formation need to be maintained, how to develop the membership function in order to obtain the optimal fuzzy system control that has the ability to do the formation control and the noise coming from camera process changes the position of references view. In order to handle these problems, we propose a fuzzy logic controller system equipped with a dynamic output membership function that controls the speed of the robot wheels to handle the maintenance position in formation. The output membership function changes over time based on changes in input at time t-1 to t. The noises appearing in image processing change the virtual target point positions are handled by Extended Kalman filter. The virtual target positions are established in order to define the formations. The virtual target point positions can be changed at any time in accordance with the desired formation. These algorithms have been validated through simulation. The simulations confirm that the follower robots reach their target point in a short time and are able to maintain their position in the formation although the noises change the target point positions.

• Journal of Drive and Control
• /
• v.16 no.2
• /
• pp.22-29
• /
• 2019

This study presented a model predictive tracking control algorithm of autonomous truck based on object state estimation using extended Kalman filter. To design the model, the 1-layer laser scanner was used to estimate position and velocity of the object using extended Kalman filter. Based on these estimations, the desired linear path for object tracking was computed. The lateral and yaw angle errors were computed using the computed linear path and relative positions of the truck. The computed errors were used in the model predictive control algorithm to compute the optimal steering angle for object tracking. The performance evaluation was conducted on Matlab/Simulink environments using planar truck model and actual point data obtained from laser scanner. The evaluation results showed that the tracking control algorithm developed in this study can track the object reasonably based on the model predictive control algorithm based on the estimated states.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.978-983
• /
• 2003

In this paper, we propose a fault detection method for extended Kalman filter in decentralized filter structure. To detect a fault, a consistency between filter output and a monitoring signal is tested. State propagators are used to obtain the monitoring signal. However, the output of state propagator increases in magnitude and finally diverges as time runs. To solve such problem, two-propagator method was proposed for linear system. Two propagators are reset by Kalman filter output, alternatively, to avoid divergence. But a test statistics change abruptly at the reset instant in that method. Hence a N-step propagator method is proposed to fix up the problem. In the N-step propagator, only time propagations are performed from k-N+1 step to k step without measurement updates. A test statistics are defined by errors and its covariance between extended Kalman filter and N-step propagator. These fault detection methods are applied to integrated strapdown inertial navigation system (SDINS). By computer simulation, it is shown that the proposed methods detect a fault effectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.6
• /
• pp.126-131
• /
• 2012

Tire force is one of important parameters which determine vehicle dynamics. However, it is hard to measure tire force directly through sensors. Not only the sensor is expensive but also installation of sensors on harsh environments is difficult. Therefore, estimation algorithms based on vehicle dynamic models are introduced to estimate the tire forces indirectly. In this paper, an estimation system for estimating lateral force and states is suggested. The state-space equation is constructed based on the 3-DOF bicycle model. Extended Kalman Filter, Unscented Kalman Filter and Ensemble Kalman Filter are used for estimating states on the nonlinear system. Performance of each algorithm is evaluated in terms of RMSE (Root Mean Square Error) and maximum error.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.9
• /
• pp.724-733
• /
• 2017

Accidents caused by upset condition leads to fatal damage to both manned and unmanned aircraft. This paper deals with real-time detection of these aircraft upset situations to prevent further severe situations. Firstly, the difference between sensor measurement and predicted measurement from Extended Kalman filter is monitored to determine whether a target aircraft goes into an upset condition or not. In addition, repeating the time update stage of the Extended Kalman filter for a specific length of time can enable future upset situation prediction. The results of aforementioned both the approaches will build a bridge to upset prevention for future generation of manned/unmanned aircraft.

• Journal of Korea Water Resources Association
• /
• v.45 no.7
• /
• pp.697-711
• /
• 2012

This study applied the extended Kalman Filter, a data assimilation method, for the real-time quality improvement of runoff measurements. The state-space model of the extended Kalman Filter was composed of a rainfall-runoff model and the runoff measurement. This study divided the purpose of quality improvement of runoff measurements into two; one is to suppress the abnormally high variation of dam inflow data, and the other to amend the missing or erroneous measurements. For each case, a proper model of extended Kalman Filter was proposed, and the main difference between two models is whether only the variation is considered or both the bias and variation are considered in the estimation of covariance function. This study was applied to the Chungju Dam Basin to confirm the proposed models were effectively worked to improve the quality of both the dam inflow data and the runoff measurements with some missing and erroneous part.