• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.598-603
• /
• 1996

When locked rotor event. occurs, instantaneously affected loop and core flow were quickly reduced, which resulted in an increase in coolant temperature and system pressure. Analysis method of this event was that constant core inlet temperature and system pressure as well as change in core flow calculated from COAST code were statically used as an input variable to HERMITE code, because of no tools to simulate NSSS behavior and 1-D core neutronics transient coincidently. With employing TASS code revised with 1-D neutronics model, this event was analyzed in point of DNBR. By doing so, analysis procedure could be simplified and unreasonable conservatism might be removed in DNBR calculation by consideration of pressure increase.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.551-556
• /
• 1997

A present study addresses a loss-of-RHR event as an initiating event under specific low power or shutdown conditions. Two typical plant configurations, cold leg opening case with water-filled steam generators and pressurizer opening case with emptied steam generators, were evaluated using the RELAP5/ MOD3.2 code. The calculation was compared with the experiment conducted at ROSA-IV/LSTF in Japan. As a result, the code was capable of simulating the system transient behavior following the event. Especially, thermal hydraulic transport processes including non-condensable gas behavior were reasonably predicted with an appropriate time step and CPU time. However, there were some code deficiencies such as too large system mass errors and severe flow oscillations in core region.

• 대한안전경영과학회지
• /
• 제11권4호
• /
• pp.221-228
• /
• 2009

Electronic Product Code Information Services(EPCIS) is an EPCglobal standard for sharing EPC related information between trading partners. EPCIS provides a new important capability to improve efficiency, security, and visibility in the global supply chain. EPCIS data are classified into two categories, master data (static data) and event data (dynamic data). Master data are static and constant for objects, for example, the name and code of product and the manufacturer, etc. Event data refer to things that happen dynamically with the passing of time, for example, the date of manufacture, the period and the route of circulation, the date of storage in warehouse, etc. There are four kinds of event data which are Object Event data, Aggregation Event data, Quantity Event data, and Transaction Event data. This thesis we propose an event-based data model for EPC Information Service repository in RFID based integrated logistics center. This data model can reduce the data volume and handle well all kinds of entity relationships. From the point of aspect of data quantity, we propose a formula model that can explain how many EPCIS events data are created per one business activity. Using this formula model, we can estimate the size of EPCIS events data of RFID based integrated logistics center for a one day under the assumed scenario.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.292-295
• /
• 2000

WDCS(회선분배장치)를 제어관리하는 W/S의 Daemon 중에서 Event 처리를 담당하는 EvtProc Daemon의 경우를 들어 효율적인 부하 분산 알고리즘을 제안하였다. 본 논문에서는 대량의 Event 발생 시 담당 프로세스가 연속적으로 fork, exec 하지 않고 일정시간 대기하므로써 fork와 exec의 오버헤드를 줄이고 같은 Op Code의 연이은 Event 발생에 대기중인 프로세스가 이를 처리함으로써 더욱더 오버헤드률 줄일 수 있다. 그리고 Event를 처리하는 Child생성에 있어 주 Child가 부하분산을 담당하게 함으로써 효율적이고 안정적으로 관리할 수 있는 방안을 제시하였다.

• 전기학회논문지
• /
• 제59권2호
• /
• pp.417-422
• /
• 2010

When memory devices are exposed to space environments, they suffer various effects such as SEU(Single Event Upset). Memory systems for space applications are generally equipped with error detection and correction(EDAC) logics against SEUs. In this paper, several error detection and correction codes - RS(10,8) code, (7,4) Hamming code and (16,8) code - are analyzed and compared with each other. Each code is implemented using VHDL and its performances(encoding/decoding speed, required memory size) are compared. Also the failure probability equation of each EDAC code is derived, and the probability value is analyzed for various occurrence rates of SEUs which the STSAT-3 possibly suffers. Finally, the EDAC algorithm for STSAT-3 is determined based on the comparison results.

• Nuclear Engineering and Technology
• /
• 제49권2호
• /
• pp.395-403
• /
• 2017

An efficient evaluation method for the probability of a tornado missile strike without using the Monte Carlo method is proposed in this paper. A major part of the proposed probability evaluation is based on numerical results computed using an in-house code, Tornado-borne missile analysis code, which enables us to evaluate the liftoff and flight behaviors of unconstrained objects on the ground driven by a tornado. Using the Tornado-borne missile analysis code, we can obtain a stochastic correlation between local wind speed and flight distance of each object, and this stochastic correlation is used to evaluate the conditional strike probability, $Q_V(r)$, of a missile located at position r, where the local wind speed is V. In contrast, the annual exceedance probability of local wind speed, which can be computed using a tornado hazard analysis code, is used to derive the probability density function, p(V). Then, we finally obtain the annual probability of tornado missile strike on a structure with the convolutional integration of product of $Q_V(r)$ and p(V) over V. The evaluation method is applied to a simple problem to qualitatively confirm the validity, and to quantitatively verify the results for two extreme cases in which an object is located just in the vicinity of or far away from the structure.

• 한국통신학회논문지
• /
• 제36권1B호
• /
• pp.71-79
• /
• 2011

본 논문은 어플리케이션에 최적화된 임베디드 시스템 설계에 있어 효율적인 설계 공간을 탐색할 수 있도록 머신 기술 언어를 기반으로 한 컴파일드 코드 방식 시뮬레이터 생성 시스템을 제안한다. 제안된 시스템 event-driven 시뮬레이션의 융통성을 유지하면서 많은 시뮬레이션 시간을 소요하는 인스트럭션 펫치와 디코딩 과정을 정적으로 결정하여 빠른 수행시간을 갖는 컴파일드 코드 방식 시뮬레이터를 생성한다. 생성된 시뮬레이터는 임베디드 코어의 성능 측정을 위한 사이클 수준과 인스트럭션 수준의 시뮬레이션을 가진다. 구축된 컴파일드 코드 방식 시뮬레이터 생성기의 효율성을 확인하기 위해 JPEG 인코더 어플리케이션에 대한 아키텍처 탐색을 수행하였다. 제안된 시스템은 MIPS R3000 프로세서의 초기 임베디드 코어로 시작하여 어플리케이션에 최적화된 임베디드 코어를 얻어내었다. 이 과정에서 많은 시뮬레이션 시간이 요구되었다. 사이클 수준 컴파일드 코드 빙식 시뮬레이터는 event-driven 시뮬레이션의 정확성을 가지며 평균 21.7%의 향상된 시뮬레이션의 수행 속도를 보인다.

• 융합보안논문지
• /
• 제15권4호
• /
• pp.83-90
• /
• 2015

최근 해킹과 악성코드 등 사이버 공격기법은 매우 빠르게 변화 발전하고 있으며 그에 따른 사이버공격 기법이 다양해지고 지능화된 악성코드의 수가 증가하고 있다. 악성 코드의 경우 악성 코드의 수가 급격하게 증가함으로서 분류나 이름의 모호함으로 인해 악성코드에 대처함에 있어 어려움이 있다. 본 논문은 이러한 문제점을 해결하기 위해서 국내에 있는 백신업체들의 명명규칙을 조사 분석하고 이를 기반으로 현재까지 나온 탐지규칙의 패턴을 비교 분석해 보안관제 이벤트 탐지규칙에 적합한 명명규칙을 제안 한다.

• Nuclear Engineering and Technology
• /
• 제30권1호
• /
• pp.58-74
• /
• 1998

A PC window-based computer code, CONPAS (CONtainment Performance Analysis System), has been developed to integrate the numerical, graphical, and results-operation aspects of Level 2 probabilistic safety assessments (PSA) for nuclear power plants automatically. As a main logic for accident progression analysis, it employs a concept of the small containment phenomenological event tree (CPET) helpful to trace out visually individual accident progressions and of the detailed supporting event tree (DSET) for its detailed quantification. For the integrated analysis of Level 2 PSA, the code utilizes five distinct, but closely related modules. Its computational feasibility to real PSAs has been assessed through an application to the UCN 3&4 full scope Level 2 PSA. Compared with other existing computer codes for Level 2 PSA, the CONPAS code provides several advanced features: (1) systematic uncertainty analysis / importance analysis / sensitivity analysis, (2) table / graphical display & print, (3) employment of the recent Level 2 PSA technologies, and (4) highly effective user interface. The main purpose of this paper is to introduce the key features of CONPAS code and results of its feasibility study.

• 한국안전학회지
• /
• 제27권5호
• /
• pp.229-234
• /
• 2012

Operator's action time is evaluated from MAAP4 analysis used in conventional probabilistic safety assessment(PSA) of a nuclear power plant. MAAP4 code which was developed for severe accident analysis is too conservative to perform a realistic PSA. A best-estimate code such as RELAP5/MOD3, MARS has been used to reduce the conservatism of thermal hydraulic analysis. In this study, operator's action time of core cooling recovery operation is evaluated by using the MARS code, which its Fussell-Vessely(F-V) value was evaluated as highly important in a small break loss of coolant(SBLOCA) event and loss of component cooling water(LOCCW) event in previous PSA. The main conclusions were elicited : (1) MARS analysis provides larger time window for operator's action time than MAAP4 analysis and gives the more realistic time window in PSA (2) Sufficient operator's action time can reduce human error probability and core damage frequency in PSA.