• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.1
• /
• pp.65-74
• /
• 2004

The heat transfer coefficient and pressure drop of $CO_2$(R-744) during gas cooling Process of carbon dioxide in a horizontal tube were investigated experimentally and theoretically. The experiments were conducted without oil in the refrigerant loop. The main components of the refrigerant loop consist of a receiver. a variable-speed pump. a mass flowmeter, an evaporator. and a gas cooler(test section). The main components of the water loop consist of a variable-speed Pump. an constant temperature bath. and a flowmeter. The gas cooler is a counterflow heat exchanger with refrigerant flowing in the inner tube and water flowing in the annulus The test section consists of smooth, horizontal stainless steel tube of 9.53 mm outer diameter and 7.75 mm inner diameter. The length of test section is 6 m. The refrigerant mass fluxes were 200 ~ 300 kg/($m^2{\cdot}s$) and the inlet pressure of the gas cooler varied from 7.5 MPa to 8.5 MPa. The main results were summarized as follows : The predicted correlation can evaluated the R-744 exit temperature from the gas cooler within ${\pm}10%$ for most of the experimental data, given only the inlet conditions. The predicted gas cooley capacity using log mean temperature difference showed relatively food agreement with gas cooler capacity within ${\pm}5%$. The pressure drop predicted by Blasius estimated the pressure drop on the $CO_2$ side within ${\pm}4.3%$. The predicted heat transfer coefficients using Gnielinski's correlation evaluated the heat transfer coefficients on the $CO_2$ side well within the range of experimental error. The predicted heat transfer coefficients using Gao and Honda's correlation estimated the heat transfer coefficients on the coolant side well within ${\pm}10\;%$. Therefore. The predicted equation's usefulness is demonstrated by analyzing data obtained in experiments.

• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.143-151
• /
• 2010

We carried out studies on InSAR techniques for time-series deformation monitoring using multi-temporal SAR. The PSInSAR method using permanent scatterer is much more complicate than the SBAS because it includes many non-linear equation due to the input of wrapped phase. It is conformed the PS algorithm is very sensitive to even PSC selection. On the other hand, the SBAS method using interferogram of small baseline subset is simple but sensitive to the accuracy of unwrapped phase. The SBAS is better method for expecting not significant unwrapping error while PSInSAR is more proper method for expecting local deformation within very limited area. We used 51 ERS-1/2 SAR data during 1992-2000 over Las Vegas, USA for the comparison between PSInSAR and SBAS. Both PSInSAR and SBAS show similar ground deformation value although local deformation seems to be detected in the PSInSAR method only.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.5
• /
• pp.647-655
• /
• 2010

In this paper, a numerical study is carried out for super-pipe, flat plate and axisymmetric body flows to investigate a validity of using wall function and high $y_1^+$ in calculation of high Reynolds number flow. The velocity profiles in boundary layer agree well with the law of the wall. And it is found that the range of $y^+$��which validated the logarithmic law of the wall grows with increasing Reynolds number. From the result, an equation is suggested that can be used to estimate a maximum $y^+$ value of validity of the log law. And the slope(1/$\kappa$) of the log region of the numerical result is larger than that of experimental data. On the other hand, as $y_1^+$ is increasing, both the friction and the pressure resistances tend to increase finely. When using $y_1^+$ value beyond the range of log law, the surface shear stress shows a significant error and the pressure resistance increases rapidly. However, when using $y_1^+$ value in the range, the computational result is reasonable. From this study, the use of the wall function with high value of $y_1^+$ can be justified for a full scale Reynolds number ship flow.

• Korea journal of population studies
• /
• v.8 no.2
• /
• pp.79-92
• /
• 1985

Fertility has been declined since 1966 (see Table 1). This fertility reduction was duely caused by age at first marriage, induced abortion and contraceptive practice which has been largely increased in recent years. Although tbe proximate determinant such as induced abortion, age at marriage and breastfeeding can and do have an effect on fertility, the principal cause of the reduction in fertility in Korea during the fertility transition can be supported by correlation between level of fertility and contraceptive prevalence (See Fig. 4). Taking a regression equation between fertility (TER. Y) and prevalence level (X), the total fertility rate in 1984 was estimated as 1.9 and 2.1 based on lenear and expotential function shown as follow; $Y_1$=5.709-0.0549 X and $Y_2$_______80________ 1+e2.433+0.017X ($R^2$=O. 93) ($R^2$=0. 96) Where $Y_1$ and $Y_2$ denote total fertility rates obtained through two equations respectivelly. The peak of contraceptive prevalence was assumdd as 80 percent which is almost upper limit in human society. On the other hand, an observed value of 1984 fertility level obtained from five month period shows 2.1 which is coincident with logistic fitting after the adjustment of response error assumed around 10 to 20 percent, At any rate, fertility of Korean women will have been reached replacement level (2.1) by 1985.Thus policy for family planning program must be reviewed toward the direction of integrated approach particularly with MCH program inasmuch as fertility in Korea has already shown population replacement level that require more good quality of service in family planning and their There must be an advanced level of fertility in Korea because wide use of contraception and induced life abortion and age at marriage will effect modern fertility which shows up and down trend between 2.1 and 1.5 in general.

• Journal of Information Technology Services
• /
• v.20 no.4
• /
• pp.95-111
• /
• 2021

Recently, many organizations are actively adopting VDI (Virtual Desktop Infrastructure), an IT-based business system, to build a non-face-to-face business environment for smart-work. However, most of the existing research on VDI has focused on the satisfaction of system service quality or the use of IT resources and investment for VDI introduction. However, research on effective management and utilization of factors according to the characteristics of VDI technology is urgently required. This study is an empirical research study on how VDI technology characteristics affect interactions and work performance by identifying differences in utilization factors between general organization members and IT managers, presenting standards for business utilization and management. This study proposed a model and hypothesis that the system technology characteristics for VDI use are mediated by interactions in which users respond to functions appropriate to their work. In order to verify the hypothesis, a questionnaire survey was conducted on 188 people of companies and institutions that have adopted and used VDI through a questionnaire survey. Data analysis was performed with partial least squares (PLS), a structural equation modeling (SEM) technique that uses a component-based approach to estimation. As a result of the empirical analysis, the same environmental function for performing work, N-th security, and remote access function factors for non-face-to-face work have a significant effect on interactivity, and IT managers have an additional significant effect on the management technology characteristics of resource reallocation. Has been shown to affect. The results of this study aim to minimize trial and error due to new introduction by presenting considerations for future VDI introduction through case analysis.

• Journal of Korean Society on Water Environment
• /
• v.37 no.2
• /
• pp.103-113
• /
• 2021

In this study, an Excel-based model (ROADMOD) was developed to estimate pollutant loading from the road and evaluate BMPs. ROADMOD employs the Chezy-Manning equation and empirical expression for estimating surface runoff, and power function for pollutant buildup, and exponential function for pollutant washoff in SWMM. The results of model calibration for buildup and washoff using observed data revealed a good match between the simulation results and the observed data. The long-term surface runoff and sediment simulated by ROADMOD demonstrated a good match with those by SWMM with 2 ~ 14% of relative error. The shorter sweeping interval (within 8 days) remarkably decreased sediment loads from the road. It was found that the effect of reducing sediment loads from the road was greatly affected not only by the sweeping interval but also by sweeping on the day before a rainfall event. The 48% of removal efficiency of sediment loads from the road was achieved with 26 times of road sweeping per year when sweeping was performed on the day before the rainfall event. A 4-day sweeping interval showed similar removal efficiency (48%) with 96 times of sweeping per year. It is considered that the road sweeping on the day before a rainfall event could maximize the effect of reducing the non-point source pollution from the road with minimization of the number of road sweeping. So, the road sweeping on the day before a rainfall event can be considered as one of the useful and best management practices (BMPs) on road.

• Human Ecology Research
• /
• v.57 no.1
• /
• pp.15-26
• /
• 2019

This study showed that the association between solidarity and conflict is mediated by the communication of grandmothers and an adult child at the dyadic level. The common fate model (CFM) was designed to model mediation effects at the level of dyads. Participants consisted of 297 grandmother dyads and their adult child who were rearing preschool-aged grandchildren in Seoul and Gyeonggi-do. For analysis at the dyadic level, grandmothers and adults responded to the same questionnaire on the same variables. SPSS 23.0 performed descriptive statistical analysis and correlation analysis. The structural equation model (SEM) was estimated with AMOS 23.0. We tested the mediation model using the maximum likelihood method. Model fit index used the chi-square statistic, the incremental fit index (IFI), the comparative fit index (CFI), the root mean square error of approximation (RMSEA). The statistical significance of the indirect effect was examined using a bootstrapping procedure. The results are as follows. First, in the CFM, the direct effect between solidarity and conflict was significant. Therefore, the higher the solidarity, the lower conflict of grandmothers and an adult child. Second, the association between solidarity and conflict is mediated by communication at the dyadic level. Based on the results of this study, we discussed ways to strengthen the capacity of co-parenting between grandmothers and an adult child.

• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.440-449
• /
• 2018

Purpose: This study aims to design and verify an onsite EEWS that extracts the P-wave from a single seismic station and deduce the PGV. Method: The P-wave properties of Pd, Pv, and Pa were calculated by using 12 seismic waveform data extracted from historic seismic records in Korea, and the PGVs were computed using empirical equation on the P properties - PGV relationship and compared with the observed values. Results: Comparison of the observed and estimated PGVs within the alarm level shows the error rate of 86.7% as minimum. By reducing the PTW to 2 seconds, the alarm time can be shortened by 1 second and the seismic blind zone near the epicenter can be shortened by 6 Km. Conclusion: Through this study, we confirmed the availability of the on-site EEWS in Korea. For practical use, it is necessary to develop regression formula and algorithm reflect local effect in Korea by increasing the number of seismic waveform data through continuous observation, and to eliminate the noise from the site.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.115-121
• /
• 2019

In this paper, we propose MSAG-SCS-MMA-I adaptive blind equalization with double step size with very small residual ISI and MSE at steady-state while significantly improving the convergence speed of the traditional SCS-MMA-I algorithm in 256-QAM system. And we evaluate the equalization performance for this algorithm. Different step sizes according to the absolute value of decision-directed error instead of a fixed step-size are applied to the tap update equation of MSAG-SCS-MMA-I, which is controlled by binary flags of '1' or '0' obtained from SCS-MMA-I and decision-directed algorithms. This makes for excellent equalization performance. As a result of computer simulation, we confirmed that the proposed algorithm has more better performance than the MMA, SCS-MMA-I, and MSAG-SCS-MMA-I algorithms in terms of the performance index such as residual ISI, MSE, and MD.

• Korean Journal of Optics and Photonics
• /
• v.33 no.6
• /
• pp.324-330
• /
• 2022

We measured the Dill and Mack model parameters that determine the exposure and development characteristics of photoresists, respectively. First, photoresist samples were prepared while altering the exposure dose, and changes in transmittance were measured. Analyzing these results, the Dill model parameters A, B, and C were determined. In particular, the exact solution of the Dill model equation was used to determine the C parameter. In addition, changes in thickness were measured as a function of development time for different exposure doses, and the Mack model parameters R_min, R_max, a, and n were determined using the results. We also determined parameter values for the reduced Mack model that uses only three parameters, R_min, R_max, and n. The root mean square error between the model predictions and the measured values for the photoresist thickness was found to increase slightly compared to the case using the original Mack model with four parameters.