• East Asian mathematical journal
• /
• 제34권3호
• /
• pp.305-316
• /
• 2018

Let R be a ring with identity. A right ideal ideal I of a ring R is called ref lexive (resp. completely ref lexive) if $aRb{\subseteq}I$ implies that $bRa{\subseteq}I$ (resp. if $ab{\subseteq}I$ implies that $ba{\subseteq}I$) for any $a,\;b{\in}R$. R is called ref lexive (resp. completely ref lexive) if the zero ideal of R is a reflexive ideal (resp. a completely reflexive ideal). Let K(R) (called the ref lexive radical of R) be the intersection of all reflexive ideals of R. In this paper, the following are investigated: (1) Some equivalent conditions on an reflexive ideal of a ring are obtained; (2) reflexive (resp. completely reflexive) property is Morita invariant; (3) For any ring R, we have $K(M_n(R))=M_n(K(R))$ where $M_n(R)$ is the ring of all n by n matrices over R; (4) For a ring R, we have $K(R)[x]{\subseteq}K(R[x])$; in particular, if R is quasi-Armendaritz, then R is reflexive if and only if R[x] is reflexive.

• 한국전자파학회논문지
• /
• 제8권2호
• /
• pp.107-115
• /
• 1997

본 논문에서는 23 GHz 국간(Point-to-point) 통신용 Push-Push발진기를 Split Ring 공진기(Split Ring Resonator)를 사용하여 설계, 제작하였다. Split Ring 공진기(SRR)는 둥가회로를 이용한 이론적인 해석 및 MPIE(Mixed Potential Integral Equation)수칙해석 툴을 이용 해석하였다. 이 해석된 결과를 사용하여 전송 모드로 마이크로 스트립 라인과 결합된 SRR를 분석하였다. 제작된 발진기은 23 GHz에서 출력 전력은 4dBm, 기본 주파수 및 3차 고조파 억제는 - 20 dBc, - 34 dBc의 특성과 발진주파수에서 1 MHz offset에서 -109 d dEc/Hz의 SSB위상잡음 및 1.4%의 변환 효율을 나타내었다. 이 실험결과는 이론 및 시뮬레이션 결과와 일치함을 알 수 있다.

• International Journal of Fluid Machinery and Systems
• /
• 제1권1호
• /
• pp.155-168
• /
• 2008

This paper investigates a variable geometry (VG) mixed flow turbine with a novel, purposely designed pivoting nozzle vane ring. The nozzle vane ring was matched to the 3-dimensional aspect of the mixed flow rotor leading edge with lean stacking. It was found that for a nozzle vane ring in a volute, the vane surface pressure is highly affected by the flow in the volute rather than the adjacent vane surface interactions, especially at closer nozzle positions. The performance of the VG mixed flow turbine has been evaluated experimentally in steady and unsteady flow conditions. The VG mixed flow turbine shows higher peak efficiency and swallowing capacity at various vane angle settings compared to an equivalent nozzleless turbine. Comparison with an equivalent straight vane arrangement shows a higher swallowing capacity but similar efficiencies. The VG turbine unsteady performance was found to deviate substantially from the quasi-steady assumption compared to a nozzleless turbine. This is more evident in the higher vane angle settings (smaller nozzle passage), where there are high possibility of choking during a pulse cycle. The presented steady and unsteady results are expected to be beneficial in the design of variable geometry turbochargers, especially the ones with a mixed flow turbine.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.359-360
• /
• 2009

In this study, we propose a practical method to improve the clarity and the period of the beat in a Korean bell. Proper beating in vibration and sound is very important feature in Korean bell. An equivalent ring theory is applied and finite element analysis is performed to determine the condition of the asymmetry of the bell. The clearity and the period of the beat are improved by attaching a counter mass or decreasing local thickness. This paper shows that the improved the attaching a counter mass or decreasing local thickness. This paper of the beat are improved by attaching a counter mass or decreasing local thickness. This paper shows that the amount and position of the local variation for the required beat condition can be predicted by using the equivalent model, The predicted results are verified by the experiment.

• 동력기계공학회지
• /
• 제1권1호
• /
• pp.98-105
• /
• 1997

In general, crankshafts which are used in internal combustion reciprocating engines are subjects to high torsional vibration. Therefore, a damper is often used to minimize the torsional vibration in reciprocating engines. In this paper, in order to investigate damping performance of viscous damper, the real effective viscosity and complex damping coefficient of silicone oil, and the effective inertia moment of inertia ring are calculated considering the relative motion between damper casing and inertia ring. Based on these results multi-cylinder shaft is modeled into equivalent 2-degree of freedom system and optimum condition is estimated by calculating the amplification factor of viscous damper. Also the test damper was manufactured according to the result of theoretical investigation, the performance and durability was ascertained through experimental examination.

• 한국전자통신학회논문지
• /
• 제10권6호
• /
• pp.653-658
• /
• 2015

본 논문에서는 MMIC(: Monolithic Microwave Integrated Circuit) 설계에 적용 가능한 결함 접지면 구조의 사각 분리형 링 공진기를 제안한다. 본 논문에서는 공진기의 등가회로 파라미터를 공진기의 측정된 특성 값으로부터 수식적으로 계산하는 방법을 나타내었다. 본 논문에서 제안하는 방법을 검증하기 위해 공진주파수가 2.95 GHz인 결함 접지면 구조의 사각 분리형 링 공진기를 제작하여 특성을 측정하고 그것을 본 논문의 방법대로 등가 파라미터를 계산하였다. 이 결과를 시뮬레이션한 결과와 비교하여 일치함을 보였다.

• 충청수학회지
• /
• 제26권4호
• /
• pp.799-809
• /
• 2013

An ideal I of a local ring (R, m, k) is said to be m-full if there exists an element $x{\in}m$ such that Im : x = I. An ideal I of a local ring R is said to have the Rees property if ${\mu}$(I) > ${\mu}$(J) for any ideal J containing I. We study properties of m-full ideals and we characterize m-primary m-full ideals in terms of the minimal number of generators of the ideals. In particular, for a m-primary ideal I of a 2-dimensional regular local ring (R, m, k), we will show that the following conditions are equivalent. 1. I is m-full 2. I has the Rees property 3. ${\mu}$(I)=o(I)+1 In this paper, let (R, m, k) be a commutative Noetherian local ring with infinite residue field k = R/m.

• 대한수학회논문집
• /
• 제32권2호
• /
• pp.277-285
• /
• 2017

In the various module generalizations of the concepts of prime (semiprime) for a ring, the question "when are semiprime modules subdirect product of primes?" is a serious question in this context and it is considered by earlier authors in the literature. We continue study on the above question by showing that: If R is Morita equivalent to a right pre-duo ring (e.g., if R is commutative) then weakly compressible R-modules are precisely subdirect products of prime R-modules if and only if dim(R) = 0 and R/N(R) is a semi-Artinian ring if and only if every classical semiprime module is semiprime. In this case, the class of weakly compressible R-modules is an enveloping for Mod-R. Some related conditions are also investigated.

• 대한수학회지
• /
• 제52권4호
• /
• pp.839-851
• /
• 2015

A *-ring R is called (strongly) *-clean if every element of R is the sum of a projection and a unit (which commute with each other). In this note, some properties of *-clean rings are considered. In particular, a new class of *-clean rings which called strongly ${\pi}$-*-regular are introduced. It is shown that R is strongly ${\pi}$-*-regular if and only if R is ${\pi}$-regular and every idempotent of R is a projection if and only if R/J(R) is strongly regular with J(R) nil, and every idempotent of R/J(R) is lifted to a central projection of R. In addition, the stable range conditions of *-clean rings are discussed, and equivalent conditions among *-rings related to *-cleanness are obtained.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(3)
• /
• pp.265-270
• /
• 1996

The temperature distribution in the pellet was obtained from beginning the general heat conduction equation. The thermal conductivity of pellet used the SIMFUEL data that made clear the effect of burnup on the thermal conductivity degradation. Since the pellet rim acts as the thermal barrier to heat flow. the pellet was subdivided into several rings in which the outer ring was adjusted to play almost the same role as the rim. The local burup in each ring except the outer ring was calculated from the power depression factor based on FASER results. whereas the rim burnup at the outer ring was achieved by the pellet averaged burnup based on the empirical relation. The rim changed to the equivalent Xe film so the predicted temperature shooed the thermal jump across the rim. The observed temperature profiles depended on linear heat generation rate. fuel burnup. and power depression factor. The thermal conductivity degradation modelling can be applied to the fuel performance code to high burnup fuel,