• 전자공학회논문지C
• /
• 제35C권7호
• /
• pp.11-19
• /
• 1998

A signal line potential variation due to the delta-I noise was physically investigated in CMOS integrated circuits. An equivalent circuit for the noise analysis was presented. The signal line was modeled as segmented RC-lumped circuits with the ground noise. Then the equivalent circuit was mathematically analyzed. Therebvy a new signal line potential variation model due to the switching mosie was developed. Th emodel was verified with 0.35.mu.m CMOS deivce model parameters. The model has an excellent agreement with HSPICE simulation. Thus the proposed model can be dirctly employed in the industry to design the high-performance integrted circuit design as well as integrated circuit package design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.49-51
• /
• 1994

LIM has been developed for use in the industry, transportation, OA, FA because of the merits of direct drive and simple structure. The thrust control of LIM usually has been the average thrust control. However, vector control is required to control the instantaneous thrust force for an accurate positioning and speed control. To obtain dynamic vector control characteristics, it is important to make equivalent circuits which represent exactly LIM In this paper, asymmetrical d-q equivalent circuits is built [1] and vector control characteristics is calculated by simulation using these circuits.

• 조명전기설비학회논문지
• /
• 제12권3호
• /
• pp.59-66
• /
• 1998

In this paper, the thrust control of PWM Inverter-Fed SLIM(Single-sided Linear Induction Motor) is achieved with Space Vector control and PI control. The trembling of air gap length which is occurred between the primary winding core and the secondary structure of the SLIM must be minimized in order to get quick response characteristics. First, the equivalent circuits and voltage equations of SLIM are shown on th suitable d-q axis which analyze characteristics of the thrust and the normal force. Also, modeling and analysis of the equivalent circuits transferred d-q axis are able to make robust transient torque from the current regulation in the equivalent circuit. These results exemplified the direct drive of SLIM with the reference speed and torque were verified by experiments.

• 전자공학회논문지A
• /
• 제33A권7호
• /
• pp.156-161
• /
• 1996

Accurate equivalent circuit modeling using multi-circuit optimization has been perfomred for detemining small-signal model of AlGaAs/GaAs HBTs. Three equivalent circuits for a cutoff biasing and two active biasing at different curretns are optimized simultaneously to fit gheir S parameters under the physics-based constrain that current-dependent elements for one of active circuits are connected to those for another circit multiplied by the ratio of two currents. The cutoff mode circuit and the physical constrain give the advantage of extracting physically acceptable parameters, because the number of unknown variables. After this optimization, three ses of optimized model S-parameters agree well with their measured S-parameters from 0.045 GHz to 26.5GHz.

• 대한전자공학회논문지SD
• /
• 제40권12호
• /
• pp.63-71
• /
• 2003

IDDQ 테스팅은 CMOS VLSI 회로의 품질 및 신뢰성 향상에 중요한 테스트 방식이다. 그러나 상대적으로 느린 IDDQ 테스트를 위해서는 고려한 고장 모델에서 발생 가능한 고장의 수를 감소하거나 가능한 적은 수의 테스트 패턴을 유지하는 게 필요하다. 본 논문에서는 IDDQ 테스팅에 자주 이용되는 트랜지스터 합선 고장 모델에서 발생 가능한 고장의 수를 효과적으로 감소시킬 수 있는 효율적인 등가 고장 중첩 알고리즘을 제안한다. ISCAS 벤치마크 회로의 모의 실험을 통하여 제안된 방식의 우수한 성능을 확인하였다.

• 대한전자공학회논문지
• /
• 제12권3호
• /
• pp.26-29
• /
• 1975

본 논문은 먼저 n상다이오드평균검파전로와 n상다이오드 포낙선검파국락의 정기파 신호에 대한 입력등가저항을 검파각로의 부하단에서 발생하는 전력손실로 부터 해석적으로 구하였다. 또한 동일한 방법으로 임의의 주기적 신호에 대한 n상다이오드 포낙선검액회로의 입력권가저항도 구하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.23-24
• /
• 2007

Most of modern wind turbines employs a doubly-fed induction generator (DFIG) system because it has many advantages due to variable-speed operation, relatively high efficiency and it small converter size. The DFIG system uses a wound rotor induction machine so that the magnetizing current of the generator can be fed from both the stator and the rotor. This paper presents a protection relaying algorism for DFIG using the DQ equivalent circuits. The induced voltages calculated from the stator and rotor sides are nearly the same in the steady state. They become different in the DQ equivalent circuits during an internal fault. The proposed algorithm compares the inducted voltages estimated from the stator and the rotor circuit converted into the stationary reference frame. If the difference between the induced voltages exceeds the threshold, the proposed algorithm detects an turn-to-turn fault.

• Bulletin of the Korean Chemical Society
• /
• 제15권12호
• /
• pp.1084-1088
• /
• 1994

Electrical characteristics of Fe-substituted sodalites were analyzed and equivalent circuits of samples were designed using impedance and admittance data. Internal components of resistances (R$_e$, R$_b$, and R$_{gb}$) and capacitances (C$_b$, C$_dl$ and C$_D$) could be extracted by changing the frequency of measurement at three different temperatures. Upon increasing the temperature, electrical properties of the samples could be elucidated in detail by equivalent circuit. The substitution of Fe on Al site was indirectly confirmed by ESCA and the results explain the lower polarity in Na-O bond of Fe 10 mole ${\%}$-substituted sodalite.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.739-742
• /
• 2006

In this paper, we propose a method for automatic generation of equivalent circuit for unit cell of LCDTV. In order to extract a circuit model, computer program generates electrical connectivity of resistors and capacitors from the layout through pattern analysis with electrode and port information. For combining two types of independent equivalent circuits, we propose a node insertion algorithm. As a consequence, we can generate an equivalent RC circuit without increasing the capacitive elements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.80-82
• /
• 1988

This paper proposed a new equivalent circuit and parameter estimation for I.M, which is different from T type and L type equivalent circuits. By using this circuit, we can analyze the torque of I.M, such as seperately exited D.C Motor, further more, we think that this equivalent circuit is effective to the vector control system for I.M.