• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.102-107
• /
• 2019

Anionic surfactants were synthesized by using an sarcosine, taurine and fatty alcohol with varying the carbon chain length. The structure of synthesized surfactants was confirmed by $^1H$ NMR analysis. The critical micelle concentration of the synthetic anionic surfactant was $10^{-2}{\sim}10^{-4}mol/L$ and the surface tension value at the critical micelle concentration was between 21 and 39 mN/m. It was confirmed by the Ross-Miles method that the synthetic surfactant with the carbon chain of 12 showed a good foaming power and stability. In addition, the surfactant using the sacosine was found to have a good affinity in soybean oil while that using taurine in benzene. The physical properties of synthesized surfactants were determined by measuring the critical micelle concentration, foaming power and emulsifying stability.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.579-586
• /
• 2018

In this study, surfactants were synthesized using fatty alcohols of 8, 10, 12 and 14 carbon chains length. The structures of the synthesized surfactants was confirmed by FT-IR and $^1H$-NMR analysis. The surface tension of the diluted surfactant was measured as 26~32 mN/m depending on the carbon length and the critical micelle concentration was measured as $10^{-3}{\sim}10^{-5}mol/L$.The minimum value per molecule of the synthesized sulfonic acid surfactant is 1.68 to $1.30nm^2$. The physical properties of the synthesized surfactants were determined by measuring the critical micelle concentration, foaming power, emulsifying stability, and contact angle.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.1
• /
• pp.7-13
• /
• 2014

A cationic ester type surfactant, namely N-2-hydroxy-3-(2-hydroxyacetoxy) proply-N,N-dimethyldodecylaminium chloride(HPDA) was synthesized and confirmed by FT-IR and $^1H$-NMR spectroscopy. Surface tensions on the diluted aqueous solutions of the synthetic compounds were measured and evaluated critical micelle concentration. Surface tension was 33~34 dyne/cm in the range of $10^{-3}{\sim}10^{-2}mol/L$ and critical micelle concentration(c.m.c) value was $8.5{\times}10^{-3}mol/L$ by surface tension method. Emulsifying properties of the synthetic surfactant(HPDA) and Sodium lauryl sulfate (SLS), tetradecyl trimethyl ammonium bromide (TTAB) was tested. As a results, synthetic glycolic acid ester type compounds(HPDA) has been confirmed as a good emulsifier. The foaming power and stability of synthesized ester type surfactant was measured by Ross-Miles method.

• Clean Technology
• /
• v.11 no.4
• /
• pp.195-204
• /
• 2005

A new condensation process for manufacturing N-acyl taurates which generates less pollutant and produces more than 60 % yield in comparison with the conventional process has been developed in this work. Its optimum process conditions are at $210{\sim}230^{\circ}C$ of reaction temperature and 6 ~ 9 hour of reaction time when Parasol 123 of petroleum refired oil is employed as process solvent and mixed catalysts of sulfonic acid and phosphoric acid are utilized as process catalyst. And the qualities of N-acyl taurates produced by this new process are similar to or better than those of imported product judging from their acid value, amine value and color. Thus, it can be said that the newly developed process for manufacturing N-acyl taurates in this work is better than the conventional process. The physical properties of N-acyl taurates produced in this work such as surface tension, foaming power, foaming stability, hard water stability, and emulsifying power etc. were compared with those of commercially available anionic surfactants. And the experimental results show that N-acyl taurates shows good physical properties and that they can be alternative to conventional anionic surfactants.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.836-847
• /
• 2016

Water soluble oil was obtained by pyrolysis of biomass. The characteristics of emulsified fuel by mixing water soluble oil and MDO(marine diesel oil) and engine emissions were studied with engine dynamometer. Saw dust was used as biomass. Water soluble oil was obtained by condensing of water and carbon content with pyrolysis of saw dust at $500^{\circ}C$. Emulsion fuel was obtained by emulsifying MDO and water soluble oil by the water soluble oil mixing ratio of 10 to 20% of MDO. Exhaust gas detection was performed with engine dynamometer. While combustion, micro-explosion took place in the combustion chamber by water in the emulsion fuel, emulsion fuel scattered to micro particles and it caused to smoke reduction. The heat produced from water vapour reduce the temperature of internal combustion chamber and it caused to inhibition of NOx production. It can be verified by the lower exhaust temperature of each ND-13 mode using emulsion fuel than that of MDO fuel. The NOx and smoke concentration were reduced by increasing water soluble oil content in the emulsion fuel. The power also decreased according to the increment of water soluble oil content of emulsion fuel because emulsion fuel has low calorific value due to high water content than MDO. As a result of ND-13 mode test with 20% bio oil content, it was achieved 25% reduction in NOx production, 60% reduction in smoke density, and 15% reduction in power loss.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.1421-1432
• /
• 2018

Water soluble oil was obtained from the pyrolysis of coconut waste as a biomass at $600^{\circ}C$. It was studied that the combustion characteristics of bio-emulsion fuel by mixing and emulsifying 15~20% of water soluble oil which obtained from pyrolysis of coconut waste as a biomass and MDO(marine diesel oil) as a marine fuel. Engine dynamometer was used for detecting emissions, temperature, and power. The temperature of combustion chamber was decreased because the moisture in bio-emulsion fuel deprived of heat of evaporation in combustion chamber. While combustion, micro-explosion took place in the combustion chamber by water in the bio-emulsion fuel, MDO fuel scattered to micro particles and it caused to smoke reduction. The temperature reduction of combustion chamber by using bio-emulsion fuel reduced the NOx emission. The increasing of bio-oil content caused increasing water content in bio-emulsion fuel so total calorific value was reduced. So the characteristics of power was decreased in proportion to using the increasing amount of bio-emulsion fuel. Heavy oil as a marine fuel exhausts a lot of smoke and NOx. We expect that we can reduce the exhaust gas of marine engine such as smoke and NOx by using of bio-emulsion fuel as a marine fuel.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.3
• /
• pp.243-253
• /
• 2006

This study was designed to investigate the feasibility of utilizing concentrates of sunmul(soybean curd whey), the waste by-product of soybean curd processing, as functional food ingredients. Sunmul was concentrated by nanofiltration fo11owing ultrafiltration and then freeze-dried. The oil adsorption capacity of the nanofiltraion(NF) powder(97.33g/100g) was similar to that of sunmul powder(94.17g/100g), but was lower than that of ISP(isolated soy protein). However, the water holding capacity of NF powder could not be determined because the NF powder completely dissolved in water. The protein solubilities of sunmul powder and ISP in distilled H$_{2}$O, 0.1M and 0.5M NaCl were lowest at pH 4.0 and increased at more acidic or alkaline conditions. However, the protein solubility of NF powder was at its minimum at pH 6.0 and increased at more acidic or alkaline conditions. Emulsifying activity indexes of NF powder in 4% and 6% solution were minimal at pH 4.0 and 6.0, respectively, which were 3 to 8 times lower than that of sunmul powder. The emulsion stability of 4% sunmul solution was lowest at pH 4.0, but that of NF powder was highest at pH 5.0 and decreased at more acidic or alkaline conditions at all concentrations of solution. The total free amino acid contents of protein in sunmul, and NF power were 99.07 and 2,110.10mg%, respectively, and NF powder exhibited especially high threonine content. Rapid viscosity analysis of dough with 1 to 5% added NF powder demonstrated that all of the peak and final viscosities decreased with increasing NF powder concentration compared to the control.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.6
• /
• pp.1687-1698
• /
• 2021

This study is to produce multiple layers of liposomes in a supercritical state and encapsulates active ingredients in order to stably encapsulate thermodynamically unstable active ingredients. In order to form a liposome in a supercritical state, a mixed surfactant development including vegetable-derived hydrogenated phosphatidyl choline and their delivative, hydrogenated sucrose distearate was synthesized as high purity. It describes a manufacturing method of injecting liquid carbon dioxide into a reactor to create a supercritical state and stirring to produce a giant liposome, and adding and loading genistein and quercetin. The HLB of the mixed lipid complex (SC-Lipid Complex) was 12.50, and multiple layers of liposome vesicles were formed even at very low concentrations. This surfactant had a specific odor with a pale yellow flake, the specific gravity was 0.972, and the acid value was 0.12, indicating that it was synthesized with high purity. As a result of the emulsifying capacity experiment using 20 wt% capric/capric triglyceride and triethylhexanoin using SC-Lipid Complex, it was found to have 96.2% emulsifying power. SC LIPOSOME GENISTEIN was confirmed that a multi-layer liposome vesicle was formed through a transmission electron microscope (Cryo-TEM) for the supercritical liposome encapsulated with genistein. The primary liposome particle size in which genistein was encapsulated was 253.9 nm, and the secondary capsule size was 18.2 ㎛. Using genistein as the standard substance, the encapsulation efficiency of supercritical liposomes was 99.5%, and general liposomes were found to have an efficiency of 93.6%. In addition, the antioxidant activity experiment in which quercetin was sealed was confirmed by the DPPH method, and it was found that the supercritical liposome significantly maintained excellent antioxidant activity. In this study, thermodynamically unstable raw materials were sealed into liposomes without organic solvents in a supercritical state. Based on these results, it is expected that it can be applied to various forms such as highly functional skincare cosmetics, makeup cosmetics, and scalp protection cosmetics.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.5
• /
• pp.506-519
• /
• 2017

This study evaluated the protein recovery and functional properties and biological activity of boiled and steamed process water (BPW and SPW, respectively) generated from the preparation of concentrated roe of bastard halibut (BH; Paralichthys olivaceus), skipjack tuna (ST; Katsuwonus pelamis), and yellowfin tuna (YT; Thunnus albacares) using the cook-dry process. The protein loss from the water extracts (EXT) of 100 g of roe protein was 15.05-19.71% and was significantly (P<0.05) higher than that of BPW (5.47-10.34%) and SPW (3.88-8.18%). The foam capacity of BPW (166-203%) and SPW (15-194%) was better than that of EXT. The emulsifying activity index of the original samples was lower than those ($15.40-107.86m^2/g$) of diluted protein samples. The 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity and the reducing power of BPW and SPW were stronger than those of EXT. The 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid ($ABTS^+$) radical scavenging activity of EXT (0.028-0.045mg/mL) was significantly higher those of BPW and SPW. The angiotensin I-converting enzyme (ACE) inhibitory activity of SPW was the highest for BH (1.04 mg/mL), followed by YT and ST. The predominant amino acids in SPW were Glu, Ala, Leu, and His. These results demonstrate that processing water containing diluted organic components, including protein, can be consumed directly by humans as a functional reinforcing material after appropriate concentration processes.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.50 no.6
• /
• pp.694-706
• /
• 2017

This study evaluated the protein recovery, functional properties and biological activity of isolate processed water (IPW) generated in the preparation of protein isolates from fish roes (BH, bastard halibut Paralichthys olivaceus; ST, skipjack tuna Katsuwonus pelamis; YT, yellowfin tuna Thunnus albacares) by an isoelectric solubilization and precipitation process. The IPWs contained 2.7-5.4 mg/mL of protein, and the protein losses were 8-21% (P<0.05). The form capacity of IPW-3 for BH and ST, and IPW-4 for YT was 155, 194, and 164%, respectively. The emulsifying activity index ($27-43m^2/g$) of the YT-IPWs was the strongest, followed by ST ($7-29m^2/g$) and BH ($10-19m^2/g$). The 2,2-diphenyl-1-picrylhydrazyl scavenging activities of IPW-1 and -3 were higher than those of IPW-2 and -4. The 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid scavenging activity ($IC_{50}$, mg/mL) of IPW-2 and -4 was 0.03 mg/mL for BH, 0.04-0.08 mg/mL for ST, and 0.04-0.07 mg/mL for YT. BH IPW-3 had the strongest reducing power (0.41 mg/mL) and superoxide dismutase-like activity (1.68 mg/mL). The angiotensin-I converting enzyme inhibitory activity of IPW-3 was the highest for ST (1.52 mg/mL), followed by BH and YT. The common predominant amino acids in the IPWs were the essential amino acids Val, Leu, Lys, and Arg and the non-essential amino acids Ser, Glu, and Ala.