• Journal of KIISE:Computing Practices and Letters
• /
• v.13 no.7
• /
• pp.508-519
• /
• 2007

Flash memory based storage has been used in various mobile systems and now is to be used in Laptop computers in the name of Solid State Disk. The Flash memory has not only merits in terms of weight, shock resistance, and power consumption but also limitations like erase-before-write property. To overcome these limitations, Flash memory based storage requires special address mapping software called FTL(Flash-memory Translation Layer), which often performs merge operation for block recycling. In order to reduce block recycling cost in NAND Flash memory based storage, we introduce another block recycling scheme which we call migration. As a result, the FTL can select either merge or migration depending on their costs for each block recycling. Experimental results with Postmark benchmark and embedded system workload show that this cost-based selection of migration/merge operation improves the performance of Flash memory based storage. Also, we present a solution of macroscopic optimal migration/merge sequence that minimizes a block recycling cost for each migration/merge combination period. Experimental results show that the performance of Flash memory based storage can be more improved by the macroscopic optimization than the simple cost-based selection.

• Journal of Convergence Society for SMB
• /
• v.2 no.1
• /
• pp.33-40
• /
• 2012

Recently, embedded environment suffers a huge change, by growth of hardware and turning to be software-controlled. This has improved embedded software complexity. It also brought us the limit of the old development way to resolve the problem. Model-driven development is one solution to solve the limit common software development by previous way, and it became a one uses for embedded environment also. In this paper, we propose model based development approach for embedded software, witch consists of diagram editor and automatic code generator. The diagram editors are implemented by GMF, which include additional functions to solve memory restrictions and concurrent execution problems without OS environment to a automatic code generator. In order to verify the generated code, it will be tested in main control model of UAV by replacing existing module with generated one.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.71-78
• /
• 2008

In this paper, we implement the H.264/AVC baseline decoder by hardware-software partitioning under the embedded Linux Kernel 2.4.26 and the FPGA-based target board with ARM926EJ-S core. We design several IPs for the time-demanding blocks, such as motion compensation, deblocking filter, and YUV-to-RGB and they are communicated with the host through the AMBA bus protocol. We also try to minimize the number of memory accesses between IPs and the reference software (JM 11.0) which is ported in the embedded Linux. The proposed IPs and the system have been designed and verified in several stages. The proposed system decodes the QCIF sample video at 2 frame per second when 24MHz of system clock is running and we expect the bitter performance if the proposed system is designed with ASIC.

• Journal of IKEEE
• /
• v.10 no.2 s.19
• /
• pp.156-160
• /
• 2006

Capacitance versus voltage (C-V) curves of Ge-nanocrystal (NC)-embedded MOS capacitors with and without a single capping Al2O3 layer are characterized in this work. C-V curves of the Ge-NC-embedded MOS capacitor with the A12O3 layer are counterclockwise in the voltage sweeps, which indicates tile presence of charge storages in the Ge NCs by the tunnelling of charge carriers between the Si substrate and the Ge NCs. In the Ge-NC-embedded MOS capacitor without Al2O3 layer, clockwise hysteresis of the C-V curves and leftward shifts of the flat band voltages are observed for the embedded MOS capacitor without the Al2O3 layer. It is suggested that the characteristics of the C-V curves are due to the charge trapping at oxygen vacancies within a SiO2 layer. In addition, the illumination of the white light enhances the lower capacitance part of the C-V hysteresis. The origin for the enhancement is discussed in this paper.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.3
• /
• pp.493-497
• /
• 2005

This paper is about the research of the User Agent implementation under wireless embedded environment, using SIP which is one of protocol components construct the VoIP system. The User Agent is made of the User Agent configuration block, the device thread block to control devices and the SIP stack block to process SIP messages. The device thread consists of the RTP thread and the sound lard device processing block. Futhermore, the SIP stack consist of the worker thread to process proxy events, the SIP transceiver and SIP thread to transfer and receive SIP messages. The H/W platform is a board included the Intel's XScale PXA255 processor, flash memory, SDRAM, Audio CODEC module and wireless LAN threough PCMCIA socket, furthermore a microphone and headphone is used by the audio 1/0. The system has embedded linux kernel 2.4.19. For embedded environment, the function of User Agent and SIP method is diminished. Finally, the resource of system could be reduced about $12.9\%$, compared to overall system resource, by minimizing peripherals control and excepting TCP.

• ETRI Journal
• /
• v.30 no.6
• /
• pp.826-832
• /
• 2008

The metal-ferroelectric-metal (MFM) capacitor in the ferroelectric random access memory (FeRAM) embedded RFID chip is used in both the memory cell region and the peripheral analog and digital circuit area for capacitance parameter control. The capacitance value of the MFM capacitor is about 30 times larger than that of conventional capacitors, such as the poly-insulator-poly (PIP) capacitor and the metal-insulator-metal (MIM) capacitor. An MFM capacitor directly stacked over the analog and memory circuit region can share the layout area with the circuit region; thus, the chip size can be reduced by about 60%. The energy transformation efficiency using the MFM scheme is higher than that of the PIP scheme in RFID chips. The radio frequency operational signal properties using circuits with MFM capacitors are almost the same as or better than with PIP, MIM, and MOS capacitors. For the default value specification requirement, the default set cell is designed with an additional dummy cell.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.3
• /
• pp.331-340
• /
• 2012

In the deep sub-micron ICs, growing amounts of on-die memory and scaling effects make embedded memories increasingly vulnerable to reliability and yield problems. Spare columns are often included in memories to repair defective cells or bit lines during production test. In many cases, the repair process will not use all spare columns. Schemes have been proposed to exploit these unused spare columns to store additional check bits which can be used to reduce the miscorrection probability for triple errors in single error correction-double error detection (SEC-DED). These additional check bits increase the dimensions of the parity check matrix (H-matrix) requiring extra area overhead. A method is proposed in this paper to efficiently fill the extra rows of the H-matrix on the basis of similarity of logic between the other rows. Optimization of the whole H-matrix is accomplished through logic sharing within a feasible operating time resulting in reduced area overhead. A detailed implementation using fuse technology is also proposed in this paper.

• Journal of Internet Computing and Services
• /
• v.6 no.1
• /
• pp.65-72
• /
• 2005

Flash memories are one of best media to support portable computers in mobile computing environment. The features of non-volatility, low power consumption. and fast access time for read operations are sufficient grounds to support flash memory as major database storage components of portable computers. However. we need to Improve traditional transaction management scheme due to the relatively slow characteristics of flash operation as compared to RAM memory. In order to achieve this goal. we devise a new scheme called flash-aware transaction management (FATM). FATM improves transaction performance by exploiting SRAM and W-Cache, We also propose a simulation model to show the performance of FATM. Based on the results of the performance evaluation, we conclude that FATM scheme outperforms the traditional scheme.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1826-1829
• /
• 2005

Recent advancement in wireless communications and electronics has enabled the development of low power sensor network. Wireless sensor network are often used in remote monitoring control applications, health care, security and environmental monitoring. Wireless sensor networks are an emerging technology consisting of small, low-power, and low-cost devices that integrate limited computation, sensing, and radio communication capabilities. Sensor network platform for health care has been designed, fabricated and tested. This system consists of an embedded micro-controller, Radio Frequency (RF) transceiver, power management, I/O expansion, and serial communication (RS-232). The hardware platform uses Atmel ATmega128L 8-bit ultra low power RISC processor with 128KB flash memory as the program memory and 4KB SRAM as the data memory. The radio transceiver (Chipcon CC1000) operates in the ISM band at 433MHz or 916MHz with a maximum data rate of 76.8kbps. Also, the indoor radio range is approximately 20-30m. When many sensors have to communicate with the controller, standard communication interfaces such as Serial Peripheral Interface (SPI) or Integrated Circuit ($I^{2}C$) allow sharing a single communication bus. With its low power, the smallest and low cost design, the wireless sensor network system and wireless sensing electronics to collect health-related information of human vitality and main physiological parameters (ECG, Temperature, Perspiration, Blood Pressure and some more vitality parameters, etc.)

• Smart Structures and Systems
• /
• v.18 no.4
• /
• pp.663-682
• /
• 2016

Continuum manipulators as a kind of mechanical arms are useful tools in special robotic applications. In medical applications, like colonoscopy, a maneuverable thin and flexible manipulator is required. This research is focused on developing a basic module for such an application using shape memory alloys (SMA). In the structure of the module three wires of SMA are uniformly distributed and attached to the circumference of a flexible tube. By activating wires, individually or together, different rotation regimes are provided. SMA model is used based on Brinson work. The SMA model is combined to model of flexible tube to provide a composite model of the module. Simulating the model in Matlab provided a platform to be used to develop controller. Complex and nonlinear behavior of SMA make the control problem hard especially when a few SMA actuators are active simultaneously. In this paper, position control of the two degree of freedom module is under focus. An experimental control strategy is developed to regulate a desired position in the module. The simulation results present a reasonable performance of the controller. Moreover, the results are verified through experiments and show that the continuum module of this paper would be used in real modular manipulators.