• 대한수학회보
• /
• 제43권4호
• /
• pp.805-812
• /
• 2006

In this paper we find a suitable bound for the number of commutators which is required to express every element of the derived group of a solvable group satisfying the maximal condition for normal subgroups. The precise formulas for expressing every element of the derived group to the minimal number of commutators are given.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1172-1175
• /
• 2004

At present, CHS(Compression Hip Screw) is one of the best prosthesis for the intertrochanteric fracture. There is nothing to evaluate the CHS itself with the finite element analysis and mechanical tests. They have same ways of the experimental test of the ASTM standards. The purpose of this study is to evaluate the existing CHS and the new CHS which have transformational design factors with finite element analysis and mechanical tests. The mechanical tests are divided into compression tests and fatigue test for evaluating the failure load, strength and fatigue life. This finite element method is same as the experimental test of the ASTM standards. Under 300N of compression load at the lag screw head. There are less differences between Group (5H, basic type) and Group which has 8 screw holes. However, there are lots of big differences between Group and Group which is reinforced about thickness of the neck range. Moreover, the comparison of Group and Group shows similar tendency of the comparison of Group and Group . The Group is reinforced the neck range from Group. After the experimental tests and the finite element analysis, the most effective design factor of the compression hip screws is the reinforcement of the thickness, even though, there are lots of design factors. Moreover, to unite the lag screw with the plate and to analyze by static analysis, the result of this method can be used with experimental test or instead of it.

• 한국전자파학회논문지
• /
• 제21권6호
• /
• pp.681-689
• /
• 2010

본 논문에서는 분산 소자 형태의 마이너스 군지연 회로를 이용함으로써 피드포워드 증폭기의 효율 개선 및 구현의 용이성을 증대시킬 수 있는 새로운 구조의 피드포워드 증폭기를 제안한다. 피드포워드 증폭기의 지연 소자에 의한 삽입 손실은 심각한 시스템의 효율 저하를 유발한다. 일반적으로 이러한 손실을 줄이기 위하여 고출력 동축 케이블 또는 지연 선로 여파기를 사용하지만, 그러한 소자들의 삽입 손실조차도 무시할 수 없어서 피드포워드 증폭기의 제약 사항으로 작용한다. 제안하는 마이너스 군지연 회로를 이용함으로써 광대역 선형화를 위해 혼변조 왜곡 신호 상쇄 루프에 사용되는 지연 소자를 제거할 수 있다. 중심 주파수가 2.14 GHz인 WCDMA 하향 대역에서 -9 ns의 군지연, 0.2 dB의 삽입 손실, 그리고 30 MHz의 대역폭을 갖도록 제작된 2단 분산 소자 마이너스 군지연 회로를 이용하여 제작된 제안하는 구조의 피드포워드 증폭기는 평균 출력 전력이 44 dBm 일 때 -53.2 dBc의 인접 채널 누설비(Adjacent Channel Leakage Ratio: ACLR)를, 19.4 %의 전력 부가 효율(Power Added Efficiency: PAE)을 갖는 것으로 측정되었다.

• 대한치과교정학회지
• /
• 제47권1호
• /
• pp.21-30
• /
• 2017

Objective: The aim of this study was to investigate the three-dimensional (3D) position of the center of resistance of 4 mandibular anterior teeth, 6 mandibular anterior teeth, and the complete mandibular dentition by using 3D finite-element analysis. Methods: Finite-element models included the complete mandibular dentition, periodontal ligament, and alveolar bone. The crowns of teeth in each group were fixed with buccal and lingual arch wires and lingual splint wires to minimize individual tooth movement and to evenly disperse the forces onto the teeth. Each group of teeth was subdivided into 0.5-mm intervals horizontally and vertically, and a force of 200 g was applied on each group. The center of resistance was defined as the point where the applied force induced parallel movement. Results: The center of resistance of the 4 mandibular anterior teeth group was 13.0 mm apical and 6.0 mm posterior, that of the 6 mandibular anterior teeth group was 13.5 mm apical and 8.5 mm posterior, and that of the complete mandibular dentition group was 13.5 mm apical and 25.0 mm posterior to the incisal edge of the mandibular central incisors. Conclusions: Finite-element analysis was useful in determining the 3D position of the center of resistance of the 4 mandibular anterior teeth group, 6 mandibular anterior teeth group, and complete mandibular dentition group.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.59-61
• /
• 2003

The natural element method is a kind of meshless Galerkin method. The shape function is derived from the natural neighbor coordinates interpolation scheme. Natural neighbor shape functions are $C^0$ everywhere, except the nodes where they are $C^0$. The numerical integration is carried out using the Delaunay triangles as the background cells. The method is applied to the test problems and simulation results show that the natural element method can give accurate solutions for the electromagnetic field problems.

• Bulletin of the Korean Chemical Society
• /
• 제28권11호
• /
• pp.1902-1909
• /
• 2007

This account reports an overview of our findings in homogeneous Pd-catalyzed reactions. Herein we describe the new design in reactions of Group 14 element compounds and in homogeneous nanosize Pd catalysts. In the early stages of our study, we developed Pd-catalyzed transformations of allylic esters with disilanes, silylcyanides and acylsilanes to the corresponding silylation, cyanation and acylation products, respectively. We also developed a Pd-catalyzed three component coupling reaction of Group 14 element compounds involving 1,3-diene and acid chlorides to form β,γ-unsaturated ketone as a single product. Recently, we focus our attention on modifying the catalytic environment by nanosize Pd in order to improve the performance of Pd catalysts. These nanosystems realize efficient catalytic environment with remarkable enhancement in catalytic activity and unprecedented selectivity.

• 대한수학회보
• /
• 제52권6호
• /
• pp.2025-2034
• /
• 2015

In this paper, we characterize some PGL(2, q) by their orders and maximum element orders. We also prove that PSL(2, p) with $p{\geqslant}3$ a prime can be determined by their orders and maximum element orders. Moreover, we show that, in general, if $q=p^n$ with p a prime and n > 1, PGL(2, q) can not be uniquely determined by their orders and maximum element orders. Several known results are generalized.

• 복식
• /
• 제57권2호
• /
• pp.172-189
• /
• 2007

The purpose of this study was to identify the characteristics of ambivalent consumption appeared in the purchase behavior of apparel products by the 4Ps element of marketing mix and to clarify the relation between consumption value and clothing involvement that were the antecedent variable. Among the 4Ps element of marketing mix, brand was selected in the exterior criteria of products, and fashionability was selected in the internal criteria of products. Meanwhile, it was considered that there were no objects of conflicted or ambivalent criteria in the element of promotion. Finally, brand, fashionability, price, place, etc. were selected as the elements of marketing. A self-administered questionnaire was distributed to 550 subjects from Jun, 8th, 2006 to Jun, 22nd, 2006; 507 were used for the data analysis. The results from data analysis were following: firstly, it was identified that ambivalent consumption showed up, as the result from measuring the individual conflicting consumption by elements. Brand was the highest in the frequency of ambivalent consumption among the elements of marketing mix, and price, place, and fashionability were followed. Secondly, by product characteristics, the frequency of ambivalent consumption of casual shirt, group II, was lower than that of mountain climbing jacket, group III, in the brand element and the price element. Thirdly, as the results from conducting factorial analysis to consumption value, it had 5 dimensions, which were practical value, distinguishable/aesthetic value, conspicuous value, social/confirmative value, and enjoyable value. Also clothing involvement was classified into 4 dimensions of emotion, fashionability, symbolic and brand involvement in the result from conducting the factorial analysis to clothing involvement. Fourthly, the mean of ambivalent consuming group by each element was highest among that of other consuming groups in all the dimensions. Fifthly, ambivalent consuming group had the highest mean among other consuming groups in all the dimension of clothing involvement, such as emotion, fashionability, and symbolic by each element of marketing mix, and it means that overall, ambivalent consuming group is highly involved in all the dimension of clothing involvement.

• 대한수학회보
• /
• 제35권4호
• /
• pp.778-783
• /
• 1998

A pointed-group is an ordered pair (G,c) where G is a group and c is a specific element of G. Thus a pointed-group is a group together with a distinguish element. The aim of this paper is to generalize the result proved by R.C. Lyndon in [4], that every nilpotent group variety is finitely based for its laws.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.697-698
• /
• 2008

This paper deals with finite element characteristic analysis of brushless DC motor according to magnetic property measurement methods. Magnetic property data for non-oriented (NO) electrical steel for electric motors are measured by the Epstein test which is considered as the international standards. Data from Epstein test may result in discrepancy from motor characteristic tests due to innate anisotropic property of NO electrical steel. Finite element analysis were performed for a BLDC motor by various measurement methods such as Epstein test, Ring test and single sheet test (SST), and calculated results were compared with considering anisotropic property conditions.