• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.2
• /
• pp.375-381
• /
• 2018

As smart home network services such as home CCTV, outdoor control of home appliances, home security and disaster prevention services become popular, there appear various affiliated products including smart home gateway and smart speaker. Since those services are generally developed on the vendors' individual hardware and software platforms, it is not much expected for them to interwork well among different architecture and communication methods. In this paper, we propose a new home network service system running on an open source platform to address such issues. We implemented a home network system using OpenWRT-based wireless router(or access point) and Zigbee communication technology. In the proposed system, a wireless router replaces a commercial home gateway and small control units implemented with Arduino control electronic devices and sensors in home. Several service scenarios are also implemented to verify the operability of the proposed system.

• Journal of the Korean Society for Railway
• /
• v.11 no.2
• /
• pp.139-144
• /
• 2008

Recent advances in embedded system technology have brought more dependence on automating train control. While much efforts have been reported to improve electronic hardware's safety, not so much systematic approaches to evaluate software's safety, especially for the vital software running on board train controllers. In this paper, we propose a new software tool to evaluate software safety for the train controller. We have reviewed requirements in the international standards and surveyed available tools in the market. From that, we identified necessary tests to meet the standards and proposed a tool that can be used during the whole software life cycle. We show the functional architecture and internal components of the tool. Our tool is unique in that it is a comprehensive tool specifically designed for software safety evaluation while other tools are not.

• 전자공학회논문지 IE
• /
• v.47 no.2
• /
• pp.13-20
• /
• 2010

This paper describes a current mode PWM DC-DC converter IC for battery charger and supply power converter for portable electronic devices. The maximum supply voltage of IC is 40[V] and 2.8[V]~330[V] DC input power is converted to higher or programmed DC voltage according to external resistor ratio or wire winding ratio of transformer. The maximum supply output current is 3[A] over and voltage error of output node is within 3[%]. The whole circuit needed current mode PWM DC-DC converter circuit is designed. The package dimensions and number of external parts are minimized in order to get a smaller hardware size. The power consumption is smaller then 1[mW] at stand by period with supply voltage of 3.6[V] and maximum energy conversion efficiency is about 86[%]. This device has been designed in a 0.6[um] double poly, double metal 40[V] CMOS process and whole chip size is 2100*2000 [um2].

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.44 no.6
• /
• pp.29-34
• /
• 2007

It is important to analyse the frequency spectrum for the measurement of modulated signal, distortion, and noise. The frequency spectrum analysis is performed by the execution of Radix-2 DIT DFT i.e. FFT algorithm. The discrete input signal converted by A/D converter from the input signal in time domain is mathematically transformed to the frequency spectrum by FFT algorithm. In this study, we design the digital spectrum analyser by the hardware based on the TMS320F2812 DSP and AD9244 converter, and by the software based on the C28x S/W modules. We can timely analyse the frequency spectrum in mobile communication system by the digital frequency analyser based on the high performance DSP and S/W modules. This real-time analysing capability is the important performance in the internet-based mobile communication server system.

• Journal of Korea Multimedia Society
• /
• v.8 no.3
• /
• pp.362-371
• /
• 2005

This paper presents a digital video broadcasting - terrestrial (DVB-T) receiver system based on the orthogonal frequency division multiplexing (OFDM) modulation method, which has exhibited a good reception performance even with obstacles and a mobile reception. As such, an improved OFDM receiver is developed for a DVB-T system that also considers function expansion for further development. After manufacturing the DVB-T receiver system, the performance of the proposed system is compared with three other hardware systems, all of which are end products. The experimental results confirm the performance using the measured minimum required carrier-to-noise ratio and threshold of visibility signal for each system. In addition, a graphic user interface (GUI) and electronic program guide (EPG) are developed for the digital television user.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.8
• /
• pp.1490-1494
• /
• 2006

Most network equipment is an embedded system designed to execute specific function. An embedded system is an electronic control system mixing hardware and software to execute only fixed function for the purpose of system, not confuter, performing diverse function for a wide use. Early embedded system executed only simple function, combining specific function with optimization, a micro size, and low power, but it has developed to meet complex and diverse system. The purpose of this study is to realize DHCP server based on embedded system. To achieve this, embedded Linux was ported in ez Bord-M01 mounted with Intel Strong ARM SA1110 processor, and ethernet-based network was constructed for network function. In this way, this study suggests embedded DHCP server where Window and Linux client hosts are dynamically configurated as network information by dynamically assigning network information in embedded board.

• Korean Journal of Remote Sensing
• /
• v.34 no.2_1
• /
• pp.227-236
• /
• 2018

The focus control mechanism of the multi-purpose camera can be required for the better quality image acquisition. A good image acquisition through the hardware system including the optics and image sensor, has to be processed before the post correction for improvement of image quality. In the case of the high-resolution satellite camera, the focus control is not a necessity, unlike a normal camera due to a fixed optical system, but may be required due to various reasons. Although there is a basic focus control method using a motor for satellite electronic optical camera, a focus control method using thermal control can be a good alternative because of its various advantages in design, installation, operation, contamination, high reliability and etc. In this paper, we describe the design method and implementation results for the focus control mechanism using the temperature sensor and heater installed in the telescope structure. In the proposed focus control method, the measured temperature information is converted into temperature data by the Kalman filter and the converted temperature data are used in PI controller for the thermal focus control.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.5
• /
• pp.1029-1039
• /
• 2013

To avoid undesirable disconnection of healthy wind generators (WGs) or a wind power plant, a WG protection relay should discriminate among faults, so that it can operate instantaneously for WG, connected feeder or connection bus faults, it can operate after a delay for inter-tie or grid faults, and it can avoid operating for parallel WG or adjacent feeder faults. A WG protection relay based on the positive- and negative-sequence fault components is proposed in the paper. At stage 1, the proposed relay uses the magnitude of the positive-sequence component in the fault current to distinguish faults requiring non-operation response from those requiring instantaneous or delayed operation responses. At stage 2, the fault type is first determined using the relationships between the positive- and negative-sequence fault components. Then, the relay differentiates between instantaneous operation and delayed operation based on the magnitude of the positive-sequence fault component. Various fault scenarios involving changes in position and type of fault and faulted phases are used to verify the performance of the relay. This paper concludes by implementing the relay on a hardware platform based on a digital signal processor. Results indicate that the relay can successfully distinguish the need for instantaneous, delayed, or non-operation.

• Science of Emotion and Sensibility
• /
• v.18 no.4
• /
• pp.119-128
• /
• 2015

The demand of reflective display devices are increasing by widespread of electronic books. In this study, the emotional and reading state for reading material of paper books, reflective display, and LCD display were compared to each other. In order to determine the consumers' sensibility of E-ink e-book the emotional assessment of three different types of books was evaluated following with readability assessment and preference experiment. These experiments controlled contents on the screen by using masks to hide hardware aspects of contents. The results of the sensibility reactions by emotional-vocabulary-experiment using semantic scale show that E-ink is closer to paper than LCD. The readability and preference questionnaire for the experimental results show that e-ink is preferred than LCD and paper was preferred or seem similar to E-ink. The conclusions shows that E-ink and paper has similar sensibility and E-ink e-book is expected to replace paper books.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.5
• /
• pp.1139-1144
• /
• 2008

In this paper, we propose an automatic generation method of transaction level(TL) model from algorithmic model to verify system specification fast and effectively using virtual platform. The TL virtual platform including structural properties such as timing, synchronization and real-time is one of the effective verification frameworks. However, whenever change system specification or HW/SW mapping, we must rebuild virtual platform and additional design/verification time is required. And the manual description is very time-consuming and error-prone process. To solve these problems, we build TL library which consists of basic components of virtual platform such as CPU, memory, timer. We developed a set of design/verification tools in order to generate a virtual platform automatically. Our tools generate a virtual platform which consists of embedded real-time operating system (RTOS) and hardware components from an algorithmic modeling. And for communication between HW and SW, memory map and device drivers are generated. The effectiveness of our proposed framework has been successfully verified with a Joint Photographic Expert Group (JPEG) and H.264 algorithm. We claim that our approach enables us to generate an application specific virtual platform $100x{\tims}1000x$ faster than manual designs. Also, we can refine an initial platform incrementally to find a better HW/SW mapping. Furthermore, application software can be concurrently designed and optimized as well as RTOS by the generated virtual platform