• Journal of the Korean Society for Railway
• /
• v.13 no.1
• /
• pp.119-124
• /
• 2010

Light rail is an electric railway system, characterized by its ability to operate single or multiple car consists (trains) along exclusive rights-of-way at ground level, on aerial structures, in subways or in streets, able to board and discharge passengers at station platforms or at street, track, or car-floor level and normally powered by overhead electrical wires. Depending upon the specific system, the light rail lends some major advantages to urban settings. The evaluation of light rail technology as a potential component of regional transit systems has been the subject of extensive studies throughout the country in the past decade. For the study, feasibility was defined as "the ability of an LRT system to achieve certain level of transportation market in comparison with other transportation alternatives." This paper describes the feasibility study to evaluate a proposed light rail development project. The minimum are those LRT systems that would met to make a project feasible for further evaluation.

• Current Industrial and Technological Trends in Aerospace
• /
• v.6 no.1
• /
• pp.35-43
• /
• 2008

Technical trends of propulsion system for small aircraft are investigated. Currently, most small aircraft are equipped with piston engine, turboprop and turbofan engines, and the technology development is going continuously. For piston engines, new diesel engines are arising besides gasoline engine. The diesel engines use relatively low-cost and easy to get fuel(Jet A), so the demand for small aircraft is getting increased, and new engines with high reliability and efficiency are being developed. For gas turbine engines, application of small turbofan is getting increased for newly arising VLJ market and the engine demand will be rapidly increased in the future. On the other hand, some electric propulsions without fossil fuels are being developed without high cost of fuel and environmental effects. In the future, propulsion system for small aircraft will be developed having enhancement of performance and efficiency with higher reliability and safety.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.88-95
• /
• 2007

Korea is highly dependent on foreign countries for energy while at the same time having a high energy-consumption industrial structure. Therefore, logical improvements in energy use efficiency and nationwide energy saving are becoming more and more important in coping with the worldwidehigh oil prices and environmental issues such as listed in the Kyoto Protocol to the United Nations Framework Convention on Climate Change. Consequently, a study was conducted on the average annual load factor in domestic areas to set a reasonable and reliable technology standard plan for high-efficiency transformers. The average annual load factor in Korea was discovered to be 18.4[%] classified by industry. This factor is expected to be used in arranging a domestic standard for a minimum efficiency system for transformers, and in reviewing and supplementing the standard transformers plan for the High Energy-Efficiency Appliance Certification. The expected effect from the establishment of the technology standards plan for highly efficient transformers is the expansion of the manufacturing and distribution of highly efficient transformers that are suitable for domestic use. These will lead to electricity cost savings for users, strengthening the related industries' market competitive powers and the effective reduction of greenhouse gases on a national level by drastically reducing loss from transformers, which accounts for a large portion of the total electric supply losses.

• International Commerce and Information Review
• /
• v.7 no.3
• /
• pp.269-286
• /
• 2005

The exchange rate volatility has been increased since the time when the floating exchange rate system was introduced in Korea. As a result, the increase of the exchange rate volatility raised the risk in international trades in Korea. The purpose of this study in to study the feature of exchange rate volatility and the main sources of its increase and to confirm whether the exchange rate volatility influence export volume and price of Korea. In the first place, I measured exchange rate volatility with two methods. The one is descriptive statistic method such as the width of daily exchange rate fluctuation and the rate of exchange rate devaluation. The other is the time varying conditional variance of exchange rate. Then, I studied the sources of exchange rate volatility. In the second place, I defined the exchange rate volatility as the time varying conditional variance and estimated it by using elastic a approach model which shows exchange rate is affected by itself and its conditional variance, I estimated its effects on export volumes and prices of electric home appliances, information & communication equal and semi-conductor. The result of this study is as follows. With presumed result EU and Korea because is not the goods which is to substantial competition relationship, The effect where the relative value change of presumed result expression anger and the dollar of import and export function goes mad to the import and export of Korea the income compared to is to export and it is appearing a lot. The EU goods is sold more expensively the Korean goods than from about length being caused by American market of the dollar and the balance of trade of Korea is visible like being visible the improvement of single breadth. Because the relationship of competition is weak but substantially there is to a short term and expression - the effect where the dollar rate fluctuation is big in Korean trade there is a possibility of saying that widely known it is not.

• Journal of Information Management
• /
• v.39 no.3
• /
• pp.205-220
• /
• 2008

This research focused on the major determinants for the strategic utilization of technology tree as a strategic technology information repository after the adoption of the technology tree in the R&D intensive organization. The study was performed based on both theoretical study and qualitative case study approaches. The result is as follows; for the strategic utilization of the technology tree for the information repository, it should be the market base and be closely related with the technology roadmap. In terms of the needs of times, this study regarding the strategic utilization of technology tree as a strategic technology information repository and as a s strategic supplement for technology roadmap is anticipated to be a good reference for the R&D-oriented organizations and technology-related studies in coming years.

• Journal of Energy Engineering
• /
• v.21 no.2
• /
• pp.179-186
• /
• 2012

A climate change by increase of greenhouse gas is coming to the front by a large issue, and oxy-combustion demonstration project is coming to the attention to one plans for the reduction of carbon dioxide in power generation sector that used a fossil energy in points of time. This paper estimates benefit of electric generation, benefit of greenhouse gas reduction, benefit of environmental pollutant decreasing and domestic and foreign market value-added benefit caused by oxy-combustion demonstration project. Furthermore, this paper attempts to cost-benefit analysis, using NPV, B/C ratio, IRR techniques for oxy-combustion demonstration project. The results indicate that NPV is 681,620million KRW, B/C ratio 1.69 and IRR 21.4%. Accordingly, oxy-combustion demonstration project ensures economic feasibility that the three indicators have exceeded 0, 1.0 and 5.5%. Moreover, uses of the result is useful for the reduction of carbon dioxide in thermal power generation sector of policy decision.

• Proceedings of the Technology Innovation Conference
• /
• 1992.12a
• /
• pp.119-155
• /
• 1992

Traditionally, the target of manufaturing technology strategy was derived in a efficiency, cost and productivity. So most activities of the manufacturing brought focus into the engineering technology, equipments and research and improvement of new products to maximize the efficiency. As a resell of this legacy, most of the activities of manufacturing has been executed on the method of quality improvement, development of new equipment to incense the efficiency and the research of materials for new products. Those trends, however overlook the operation management activities which is very important as a assets in competitive strategy. But the market enviornment of morden manufacturing companies faced to the uncertainty and complexity. So they need capability of competition which requires new concept of manufacturing technology strategy to grasp the competitive advantages. In this point of view, this paper deal with the empirical study in korean manufacturing technology strategy of the electic and electronic industry. For the empirical study, check list was made to survey the 98 manufacturing companies. The analysis procedures are as below. First, identify the manufacturing technology group an product structure group by each variable. Second manufacturing technology variables are segmented into product technology and vertical integration, suborder and infrastructure, to analyse the decision making pattern which derive the strategy groups. Third, by the fitness analysis between product structure group and manufacturing technology group, the economic results of a growth rate of sale and a profit rate of sale are tested. In this approach, fitness analysis between product structure group and manufacturing technology group show, as a whole, the no significant values in economic results of the company. But investigating the statistical values shows the trend that econmic result of the complany is somewhat higher when the degree of fitness of manufacturing technology strategy by product structure has high value. Concluding the remarks, the competitive advantages of company lies not in the efficiency of manufacturing systems but in the way of the structure and decision making pattern of the manufacturing system. And the cons i stoney between strategy target and manufacturing technology strategy, and the consistency of manufacturing technology strategy and product structure are the term of competitive advantages.

• Design & Manufacturing
• /
• v.10 no.1
• /
• pp.41-45
• /
• 2016

Electrical equipment in factories, buildings, etc. with the development of the industry has become a large capacity. By the development, electric load also become diversified and there is also highly functional requirements being electrical equipment. Particularly in the small and medium-sized circuit breakers, tend to preferentially consider the economy stands out and improvements in safety, ease of mounting and connection through the modularity of the basic dimensions compact and cost to block expansion of the scope of the development of capacity, etc. The product having a competitive has been strongly required. In order to implement the circuit breakers of breaking capacity and compact at the same time taking into account the economic development of this technology applied to the current-limiting mechanism is essential budget or the current limiting mechanism is currently available mechanisms applicable to small and medium-sized frame (frame) can not do it. In this paper, at the same time satisfying the economic efficiency, by minimizing the load force of the moving contactor (moving contactor) to be applied to small and medium frame other hand to secure the economical efficiency without using high speed contact parting acceleration of the moving contactor conventional current-limiting mechanism, and to develop a current-limiting mechanism that can be satisfied with the same or higher performance to meet the needs of the market.

• Korean Journal of Materials Research
• /
• v.30 no.9
• /
• pp.489-494
• /
• 2020

SiC is a material with excellent strength, heat resistance, and corrosion resistance. It is generally used as a material for SiC invertors, semiconductor susceptors, edge rings, MOCVD susceptors, and mechanical bearings. Recently, SiC single crystals for LED are expected to be a new market application. In addition, SiC is also used as a heating element applied directly to electrical energy. Research in this study has focused on the manufacture of heating elements that can raise the temperature in a short time by irradiating SiC-I₂ with microwaves with polarization difference, instead of applying electric energy directly to increase the convenience and efficiency. In this experiment, Polydimethylsilane (PDMS) with 1,2 wt% of iodine is synthesized under high temperature and pressure using an autoclave. The synthesized Polycarbosilane (PCS) is heat treated in an argon gas atmosphere after curing process. The experimental results obtain resonance peaks using FT-IR and UV-Visible, and the crystal structure is measured by XRD. Also, the heat-generating characteristics are determined in the frequency band of 2.45 GHz after heat treatment in an air atmosphere furnace.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.1
• /
• pp.128-139
• /
• 2018

As The Fourth Industrial Revolution and Intelligent Information Age came into full-scale, the policy of open government data has become a hot topic for each country. The United States, the United Kingdom, and other countries are shifting policy direction to "creating value" of open government data. Also, in the age of the digital economy where the data market is soaring, open government data is gradually being recognized as a new raw material for new business and start-ups. In addition, Korea ranked first in the OECD open government data evaluation twice in a row, and was highly evaluated in the international evaluation. However, domestic firms are still lacking in qualitative openness of government data, data is dispersed among institutions, lack of public-private data linkage, and development of app-oriented development. This study attempts to analyze major national policies for the creation of a data ecosystem that considers data lifecycle, from production to storage, distribution and utilization of data. First, the target countries were the leading public data countries among the OGP member countries, the USA, the UK, Australia and Canada. The results of this study are as follows. As a result of analyzing the results and comparing Korea's policies, it was concluded that most of Korea is superior in open government data policy. However, improvement of data quality, development of open data portal as an open platform, support for finding various users including apps and web development companies, and cultivation of open government data utilizing personnel are analyzed as policy issues. In addition, the direction of policy for the balanced ecosystem of Korea is presented together.