• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1541-1548
• /
• 2022

The thermal conductivity of uranium oxide (UO₂) containing pores and grain boundaries is investigated using continuum-level simulations based on the finite-difference method in two and three dimensions. Steady-state heat conduction is solved on microstructures generated from the phase-field model of the porous polycrystal to calculate the effective thermal conductivity of the domain. The effects of porosity, pore size, and grain size on the effective thermal conductivity of UO₂ are quantified. Using simulation results, a new empirical model is developed to predict the effective thermal conductivity of porous polycrystalline UO₂ fuel as a function of porosity and grain size.

• 대한간호학회지
• /
• 제27권4호
• /
• pp.857-870
• /
• 1997

The purposes of this study were to describe 12 years of patient-related oncology nursing research in Korea, identifying various nursing interventions, and assesing the effectiveness of the interventions, through analysis and synthesis of the accumulated research papers. One hundred and seventy-nine studies were selected for this study and these were mostly descriptive in design (69.2%). Of the 179 studies, 25 met the criteria for meta-analytic treatment. Twenty-five experimental studies were found in theses and dissertations (68%), 92% used convenience sample, and the median sample size was 40. Subjects were predominantly in treatment and rehabilitation (76%). Most studies(68%) were not derived from a theory base, with only 8% reporting use of a nursing theory. Results of the meta-analysis are as follows. The effect size of the nursing intervention type was found to be significantly effective. The standardized mean difference ranged from a high positive of 2.55 to a low negative of -0.22. Direct personal nursing intervention method was more effective than indirect group method. Two nursing intervention methods were more effective than one. The greatest effect size was thyxical intervention. The greatest mean effect size was scalp hypothermia technique. Teaching was a frequent intervention after 1990, although a wide range of treatments were studied. Effect size of intervention for symptom management was largest in relieving pain. Effective intervention method for relieving anxiety was exercise.

• 한국환경보건학회:학술대회논문집
• /
• 한국환경보건학회 2005년도 국제학술대회
• /
• pp.381-385
• /
• 2005

Characterization of particle behavior is becoming more important in performance evaluation of water treatment system as well as in operation of the system because conventional parameter, turbidity has lack of explaining ability on small sized microorganisms such like Cryptosporidium etc. Accordingly, particle counter has been introduced in evaluation and operation of the treatment system. However researches on the relationship between turbidity, particle count and/or different sand/anthracite sizes have not been concurrent. Therefore in this study, the relationship was investigated to improve performance evaluation of sand filter so as to help choosing sand/anthracite effective size as a design parameter of water treatment facility. According to the results, too small or too large effective size media filter reached to turbidity limit(0.1 NTU)earlier. However, because shallow sand layer may cause early breakthrough, the depth of sand layer should be provided enough in order to compromise water quality and productivity.

• Computers and Concrete
• /
• 제9권1호
• /
• pp.1-19
• /
• 2012

The size-effect study of various fracture parameters obtained from two parameter fracture model, effective crack model, double-K fracture model and double-G fracture model is presented in the paper. Fictitious crack model (FCM) for three-point bend test geometry for cracked concrete beam of laboratory size range 100-400 mm is developed and the different fracture parameters from size effect model, effective crack model, double-K fracture model and double-G fracture model are evaluated using the input data obtained from FCM. In addition, the fracture parameters of two parameter fracture model are obtained using the mathematical coefficients available in literature. From the study it is concluded that the fracture parameters obtained from various nonlinear fracture models including the double-K and double-G fracture models are influenced by the specimen size. These fracture parameters maintain some definite interrelationship depending upon the specimen size and relative size of initial notch length.

• 패션비즈니스
• /
• 제12권4호
• /
• pp.114-130
• /
• 2008

The purpose of this study is to investigate the effect of Dot Pattern Size(0.8, 1.8, 2.5, 5, 8), color combination(W/Bk, Bk/Gr, Gr/W), Area-Ratio(Background/Dot, Dot/Background) on wearing dot-printed dresses image. Sets of stimulus and response scales(7 point semantic) were used as experimental materials. The stimuli were 30 color pictures manipulated with the combination of Dot Pattern Size, color combination, and Area-Ratio using computer simulation. The subjects were 180 female undergraduates living in Gyeongnam-do. The data was analyzed by using SPSS program. Analyzing methods were ANOVA and LSD test. Image factor of the stimulus was composed of 5 different components, visibility, chastity, attractiveness, cuteness and feminity. Among them, the visibility and chastity were important. Each dimensional image was affected by dot pattern size, color combination and Area-Ratio. In the visibility image, color combination(W/Bk is the most effective) is more influential, the larger size is effective pattern. In the cuteness and feminity image, area ratio(low-brightness dot pattern is the more effective) is more effective than color combination or dot pattern size. Even the same dot pattern size and area was recognized as different image depending on the area ratio. According to the variation of dot pattern size, color combination and area-ratio, it was investigated that the images for a dress wearer were expressed diversely, were shown differently in image dimensions, and could be produced to different images.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1995년도 제2회 단조심포지엄 단조기술의 진보
• /
• pp.100-123
• /
• 1995

The relationship between plastic deformation and crystal grain change in warm forging processes of SM100 carbon steel is studied. If the carbon steel is deformed in warm forging temperature (about recrystallization range), the crystal grain and cementite of the internal part are changed, so material properties are changed. Some experimental values, such as the elliptic degree of cementite, the grain size of cementitie and ferrite grain size, are investigated. When the plastic deformation proceeds, the elliptic degree of cementite becomes large, the grain size of cementite particle is small, and the size of ferrite grain appears fine by recrystallization. The elliptic degree of cementite has a considerable effect on formability. The distribution of effective strain in the forging is calculated by the rigid visco-plastic FEM analysis. The effective strain distribution obtained from the FEM simulation is compared with the experimental result. At effective strain 0.3 dynamic recovery and dynamic recrystallization begin, over 2.5 the organization of material has better quality that is suitable for the following cold forming.

• 산업기술연구
• /
• 제19권
• /
• pp.301-312
• /
• 1999

The purpose of this paper is to study the effects of container size with multi-stage and multi-item on average inventory and customer service level in Kanban systems. We use the different distributions of demand and interarrival time for each item to show that we had better to change the container size depending on different type of item for this simulation study. The small lot size can be used for container size of a single item if there is no setup time. The container size should be identical with average order size as setup time increases. The fill rate increases if the container size is large with multi-item. However, it is difficult to establish the effective container size because the effects of the container size on the order queue time are not clear. It is suitable to use the average order size as the container size for each item if the variance of demand and interarrival time of each item is relatively small. It is effective to sue the average container size if the variance of them is relatively large.

• The Journal of Korean Physical Therapy
• /
• 제32권5호
• /
• pp.312-318
• /
• 2020

Purpose: This study aimed to investigate the evidence that therapeutic horseback riding can improve balance, muscle, ADL, equivalenc, GMFM, gait, emotion with developmental disabilities and neural patients. Methods: To conduct meta-analysis, the search focused on studies that employed therapeutic horseback riding for developmental disabilities and neural patients for which eight databases (KIS, RISS, DBpia, National Assembly Library, Pubmed, Embase, Google scholar and Cochrane Library) were used to extract literature published from 2002 to September 2019. The data were analyzed the RevMan 3.5.3 program. Results: As a result of meta-analysis, therapeutic horseback riding total effect size is 0.552 for children with developmental disabilities and neural patients. And effect size result of according to assessment type variable first, balance effect size is 0.594. Second, muscle activities effect size is 0.425. Third, ADL effect size is 0.430. Fourth, equivalance effect size is 0.640. Fifth, GMFM effect size is 0.482. Sixth, gait effect size is 0.400 and seventh emotion effect size is 0.876. Conclusion: These findings is horseback riding is effective The effect size by outcome was observed to be the effective for children with developmental disabilities and neural patients. and also the horseback riding provided the positive effects of balance, muscle activities, ADL, equivalance, GMFM, gait, emotion for children with developmental disabilities and neural patients. It is hoped that this study will contribute to the development of effective treatments for children with developmental disabilities and neural patients therapeutic horseback riding and the development of study.

• 한국결정성장학회지
• /
• 제15권1호
• /
• pp.34-38
• /
• 2005

Langasite 단결정 wafer의 chemical mechanical planarization 공정에서 pH level 및 slurry 입도가 가공속도 및 평탄화도에 미치는 영향을 조사하였다. 낮은 pH level 조건하에서 더 높은 가공속도 값이 얻어진 반면에 평탄화도는 colloidal silica slurry의 평균입경에 의해 좌우됨을 확인하였다. 0.045 ㎛의 비정질 silica 입자를 함유한 슬러리를 사용하였을 때 표면에 잔류 scratch 형성이 없이 가장 좋은 가공성을 확보할 수 있었다. 가공속도와 평탄화도는 effective particle number에 대한 강한 의존성을 나타내었으며, effective particle number가 낮은 조건하에서 가공속도는 더 낮은 분포를 나타내었으나 평탄화도는 더 우수한 경향성을 확인하였다.

• 한국표면공학회지
• /
• 제36권6호
• /
• pp.455-460
• /
• 2003

Microstructural and magnetic properties of nanocrystalline Fe-46 wt%Ni and Fe-36 wt%Ni alloys were investigated. Alloys were prepared by the electrodeposition process. The electrolytes were iron sulfate/nickel chloride-based and iron chloride/nickel sulfamate-based solutions. Fe-46 wt%Ni alloy was FCC structure with grain size of 10 nm, but FCC and BCC phases were found in Fe-36 wt%Ni alloy and its grain size was smaller. Effective permeability of Fe-36 wt%Ni alloy was higher than that of Fe-46 wt%Ni alloy in the high frequency range because of large electrical resistivity and small eddy current loss resulted from grain size decrease. Up to $300^{\circ}C$ of annealing temperature, grain growth of Fe-Ni alloys slowly occured. Conversely, annealing above $450^{\circ}C$ led to a drastic grain growth. In that case, effective permeability was decreased at the temperature lower than $300^{\circ}C$ but at $300^{\circ}C$ or higher effective permeability was increased. At the high frequency of 1 MHz, electrodeposited Fe-Ni alloys had higher effective permeability with an decrease in the grain size.