• 한국태양에너지학회 논문집
• /
• 제29권5호
• /
• pp.20-27
• /
• 2009

The effect of borehole thermal resistance on the borehole length is studied. In performing this work a new concept BLRR(borehole length reduction rate) is developed based on the line source model. The solution of line source model is shown to be valid through the comparison with the data of thermal response test. It is shown that BLRR is a function of soil thermal conductivity(k) and borehole thermal resistance($R_b$). The value of BLRR increases with increasing k, which means reducing $R_b$ is more effective when k is high. The reduction of borehole length with change of $R_b$ is easily estimated with BLRR. The validity of BLRR is also examined with EED analysis.

• The Journal of Advanced Prosthodontics
• /
• 제3권4호
• /
• pp.190-195
• /
• 2011

PURPOSE. This study evaluated the initial stability of different implants placed above the bone level in different types of bone. MATERIALS AND METHODS. As described by Lekholm and Zarb, cortical layers of bovine bone specimens were trimmed to a thickness of 2 mm, 1 mm or totally removed to reproduce bone types II, III, and IV respectively. Three Implant system (Br${\aa}$nemark System$^{(R)}$ Mk III TiUnite$^{TM}$, Straumann Standard Implant SLA$^{(R)}$, and Astra Tech Microthread$^{TM}$-OsseoSpeed$^{TM}$) were tested. Control group implants were placed in level with the bone, while test group implants were placed 1, 2, 3, and 4 mm above the bone level. Initial stability was evaluated by resonance frequency analysis. Data was statistically analyzed by one-way analysis of variance in confidence level of 95%. The effective implant length and the Implant Stability Quotient (ISQ) were compared using simple linear regression analysis. RESULTS. In the control group, there was a significant difference in the ISQ values of the 3 implants in bone types III and IV (P<.05). The ISQ values of each implant decreased with increased effective implant length in all types of bone. In type II bone, the decrease in ISQ value per 1-mm increase in effective implant length of the Br${\aa}$nemark and Astra implants was less than that of the Straumann implant. In bone types III and IV, this value in the Astra implant was less than that in the other 2 implants. CONCLUSION. The initial stability was much affected by the implant design in bone types III, IV and the implant design such as the short pitch interval was beneficial to the initial stability of implants placed above the bone level.

• 복식문화연구
• /
• 제8권2호
• /
• pp.272-281
• /
• 2000

The purpose of this study is to provide for the basic data useful to the effective production. For this purpose, 180 Korean mothers who bring up from newborns to four-year-old babies were sampled to survey the problems on size occurred by wearing and purchasing the Infants'Wear and positively identify the factors affecting the fitness. Data is processed by a computer(SAS) and analyzed by using frequency, perentage, mean, χ²-test, Duncan-test. The main results of this study are as follows ; 1. Consumers'awareness of sizing system of Infant's wear tent to present relatively high and tend to purchase their infants'wear larger than actual sizes or that consumers'preferences depend little on size adaptation. 2. As a result of analyzing the part not fit, neck circumference, waist circumference, total length, neck back-waist length is short, sleeve length, pants length, shoulder length is big. In all, it has been found through this study that fitness and awareness of sizing system of Infant's Wear in purchasing infants'wear was influenced by many external factors. Therefore, in order to maximize the size adaptability for infants, Infants'Wear must be present the reasonable sizes and specifications for infants'wear in consideration of domestic and foreign specifications and infants'health condition.

• 말소리와 음성과학
• /
• 제9권2호
• /
• pp.85-94
• /
• 2017

Conventional speaker verification systems using time delay neural network, identity vector and probabilistic linear discriminant analysis (TDNN-Ivector-PLDA) are known to be very effective for verifying long-duration speech utterances. However, when test utterances are of short duration, duration mismatch between enrollment and test utterances significantly degrades the performance of TDNN-Ivector-PLDA systems. To compensate for the I-vector mismatch between long and short utterances, this paper proposes to use probabilistic linear discriminant analysis (PLDA) model adaptation with augmented data. A PLDA model is trained on vast amount of speech data, most of which have long duration. Then, the PLDA model is adapted with the I-vectors obtained from short-utterance data which are augmented by using vocal tract length perturbation (VTLP). In computer experiments using the NIST SRE 2008 database, the proposed method is shown to achieve significantly better performance than the conventional TDNN-Ivector-PLDA systems when there exists duration mismatch between enrollment and test utterances.

• 한국데이터정보과학회:학술대회논문집
• /
• 한국데이터정보과학회 2004년도 춘계학술대회
• /
• pp.7-14
• /
• 2004

In this paper, we present an effective method for process control using the Demerit-EWMA control chart in the process where nonconforming units or nonconformities are occurred by various types. We compare performance of Demerit control chart, Demerit-CUSUM control chart and Demerit-EWMA control chart based on the average run length.

• 한국멀티미디어학회논문지
• /
• 제25권11호
• /
• pp.1547-1556
• /
• 2022

As mechanical facilities are interacting with each other, the failure of some equipment can affect the entire system, so it is necessary to quickly detect and diagnose the abnormality of mechanical equipment. This study proposes a deep learning model that can effectively diagnose abnormalities in rotating machinery and equipment. CNN is widely used for feature extraction and LSTMs are known to be effective in learning sequential information. In LSTM, the number of parameters and learning time increase as the length of input data increases. In this study, we propose a method of segmenting an input segment signal into shorter-length sub-segment signals, sequentially inputting them to CNN through a time-distributed method for extracting features, and inputting them into LSTM. A failure diagnosis test was performed using the vibration data collected from the motor for ventilation equipment installed at the urban railway station. The experiment showed an accuracy of 99.784% in fault diagnosis. It shows that the proposed method is effective in the fault diagnosis of rotating machinery and equipment.

• 한국농공학회지
• /
• 제37권5호
• /
• pp.73-80
• /
• 1995

The uses of stage-storage curve function are diverse in irrigation reservoirs. The curve functions would be used to determine the optimal size of spillway length and the inundation area above full water level based on the flood routing in reservoirs. In addition, the curve function would he used to transform the stage to the storage for the reservoir water management, in which the storage is the supply water. Besides those, the curve is necessary for the planning of dredging, the estimation of the effective and the dead storage, the drought management by reservoir, etc. The curve function data, however, are almost unavailable for these purposes. According to the statistics, about 74% of the 2, 900 resevoirs which are maintained by Farm Land Improvement Association have no more effective data. Therefore, the simulation of the curve function could be better alternative. The curve functions were simulated derivating the regression equations based on the basin relief ratio and the effective depth. The results of the verification show the enough reliability of the application to generate the curve function in some reservoirs which do not have the surveyed stage-storage data. Also, even though the averaged curve function would be applicated without the basin relief ratio data, the result shows that the simulated curve is closer to the real one than the linear function by only the existing effective storage data.

• 패션비즈니스
• /
• 제13권5호
• /
• pp.81-92
• /
• 2009

The purpose of this study is to evaluate the differences of visual effects by variations in the number of pleats and the length of the pleats skirt. The stimuli are 18 samples: 6 variations of the number of pleats and 3 variations of the length of skirt. The data has been obtained from 54 fashion design majors. The data has been analyzed by Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: The visual effects by the number of pleats and the length of skirt are composed of 3 factors : vertical of lower body, curves of lower body and shape abdomen. In these factors, vertical factor is estimated by the most important factor. The visual effect is positive when the number of pleats is added and the length of skirt is getting shorter. The short length of skirt and more pleats make legs and calves looked long and slim. The interaction effects between the number of pleats and the length of skirt do not appear. In the vertical of low body factor, the length of skirt is more effective than the number of pleats, and in the curve of low body factor, the number of pleats has more effects than the length of the skirt. In the shape of abdomen, the number of pleats and length of skirt have similar influences.

• 한국융합학회논문지
• /
• 제8권12호
• /
• pp.299-305
• /
• 2017

본 논문은 아베-코닉 프리즘의 설계 데이터 산출 및 평가 프로그램에 관한 것이다. 우선 아베-코닉 프리즘의 설계 변수를 설정하였고, 이들 사이의 관계식을 유도하였다. 이 식들에 의해 우리는 face-length, 유효 수속 입사빔의 입사각 및 프리즘의 굴절률이 주어질 때 아베-코닉 프리즘의 설계를 위한 수치 데이터 및 아베-코닉 프리즘 분석을 위한 3가지 평가 데이타들이 출력되는 프로그램을 개발하였다. 실제 이 프로그램을 상용 사이즈가 아닌 프리즘에 적용한 결과 아주 빠른 설계 데이타를 산출할 수 있었고, 3가지 평가 데이타에 의해 설계되어진 아베-코닉 프리즘의 광학적 구조를 쉽게 이해할 수 있었다. 이는 제품 개발에 필요로 하는 아베-코닉 프리즘의 구조적인 데이터를 신속하게 확보할 수 있다는 것을 의미한다.

• 비파괴검사학회지
• /
• 제20권3호
• /
• pp.200-205
• /
• 2000

제 1보에서 Windows 환경 하에서 PSI/ISI 데이터의 효율적 관리 및 다원적평가와 분석이 가능한 고리 원전 PSI/ISI 데이터베이스 구축과 프로그램 개발(IDPIN)에 대해 소개하였다. 제 2보에서는 월성 원자력발전소 PSI/ISI 자료 관리를 위한 지능형 데이터베이스 프로그램(WS-IDPIN)을 개발하였다. 이 프로그램에는 월성 원전 PSI/ISI 관련 자료 분석 기능, PSI/ISI UT 검사 보고서 양식의 표준화와 전산 시스템화, PSI/ISI 비파괴검사 결과의 통계적 신뢰도 평가 프로그램(depth and length sizing performance 등) 등을 개발하여 원전 PSI/ISI 데이터 관리 전문가시스템(expert system)화에 한 단계 접근하였다.