• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.191-192
• /
• 2005

The reverse breakdown voltages of 4H-SiC SBD(schottky barrier diode)s with FP(Field Plate) and/or FLR(Field Limiting Ring) as a edge termination, were investigated. The breakdown voltages of SBDs with FP ware investigated varying the overlap width from $1{\mu}m$ to $30{\mu}m$. The maximum average breakdown voltages was 475V. There is no significant changes for the devices with overlap width of between $5{\mu}m\sim30{\mu}m$. It was confirmed that the dielectric breakdown of the thin thermal oxide is main cause of device failure. However, the breakdown voltage of SBD with FLR was 1400V even though the FLR edge termination structure was not optimized.

• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.214-219
• /
• 2014

본 논문에서는 실리콘 카바이드(silicon carbide)를 기반으로 한 tilt-implanted trench Schottky diode(TITSD)를 제안한다. 4H-SiC 트랜치 쇼트키 다이오드(trench Schottky diode)에 형성되는 트랜치 측면에 경사 이온주입(tilt-implantation)을 하여 소자가 역저지 상태(reverse blocking mode)로 동작 시 trench insulator가 모든 퍼텐셜(potential)을 포함하는 구조를 제안하고, 그 특성을 시뮬레이션을 통해 확인하였다. TITSD는 트랜치의 측면(sidewall)에 nitrogen을 $1{\times}10^{19}cm^{-3}$ 으로 도밍(doping) 하여 항복전압(breakdown voltage) 특성도 경사 이온주입을 하지 않았을 때와 같게 유지하면서 trench oxide insulator가 모든 퍼텐셜을 포함하도록 함으로써 termination area를 감소시켰다. 트랜치 깊이(trench depth)를 $11{\mu}m$로 깊게 하고 최적화된 폭(width)을 선택함으로써 2750V의 항복전압을 얻었고, 동급의 항복전압을 가진 가드링(guard ring) 구조보다 termination area를 38.7% 줄일 수 있다. 이에 대한 전기적 특성은 synopsys사의 TCAD simulation을 사용하여 분석하였으며, 그 결과를 기존의 구조와 비교하였다.

• 전기전자학회논문지
• /
• 제19권4호
• /
• pp.491-499
• /
• 2015

Silicon Carbide(SiC)는 높은 열전도도와 넓은 밴드갭 에너지로 인해 고온과 고전압 소자로 사용하는데 큰 장점을 가지고 있는 물질이다. SiC를 이용하여 전력반도체소자를 제작할 경우, 소자가 목표 전압을 충분히 견딜 수 있도록 Edge Termination 기법을 적용하여야한다. Edge Termination 기법에는 여러 가지 방안이 제안되어왔는데, SiC 소자에 가장 적합한 기법은 Junction Termination Extension (JTE)이다. 본 논문에서는 각 JTE 구조별 도핑 농도와 Passivation Oxide Charge 변화에 따른 항복전압의 변화를 살펴보았다. 결과적으로 Single Zone JTE (SZ-JTE)는 1D 시뮬레이션 값의 98.24%, Double Zone JTE (DZ-JTE)는 99.02%, Multiple-Floating-Zone JTE (MFZ-JTE)는 98.98%, Space-Modulated JTE (SM-JTE)는 99.22%의 최대 항복전압을 나타내었고, JTE 도핑 농도 변화에 따른 최대 항복전압의 민감도는 MFZ-JTE가 가장 낮은 반면 SZ-JTE가 가장 높았다. 또한 Passivation Oxide 층의 전하로 인해 소자의 항복전압의 변화를 살펴보았는데, 이에 대한 민감도 역시 MFZ-JTE가 가장 낮았으며 SZ-JTE가 가장 높았다. 결과적으로 본 논문에서는, 짧은 JTE 길이에서 높은 도핑 농도를 필요로 하는 MFZ-JTE보다 DZ-JTE와 SM-JTE가 실제 소자 설계에 있어 가장 효과적인 JTE 기법으로 분석되었다.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.565-569
• /
• 2018

For the conventional power MOSFET (metal-oxide semiconductor field-effect transistor) device structure, there exists a tradeoff relationship between specific on-state resistance (Ron,sp) and breakdown voltage (BV). In order to overcome this tradeoff, a super-junction (SJ) trench MOSFET (TMOSFET) structure with uniform or non-uniform doping concentration, which decreases linearly in the vertical direction from the N drift region at the bottom to the channel at the top, for an optimal design is suggested in this paper. The on-state resistance of $0.96m{\Omega}-cm2$ at the SJ TMOSFET is much less than that at the conventional power MOSFET under the same breakdown voltage of 100V. A design methodology for the edge termination is proposed to achieve the same breakdown voltage and on-state resistance as the main body of the super-junction TMOSFET by using of the SILVACO TCAD 2D device simulator, Atlas.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.1
• /
• pp.409-412
• /
• 2004

Edge termination technique is essential fer the fabrication of high volage devices. A proper edge termination technique is also needed in the fabrication of Silicon Carbide power devices for obtaining a stable high blocking voltage properties. Among the many techniques, the field plate formation is the easiest one that can utilize it for commercial usage. The growth of thick thermal oxide is difficult for SiC, however. In this paper, 6A grade SiC schottky barrier diodes(SBD) were fabricated with field plate edge termination. The oxides which is field plate were formed various methods such as dry oxidation, 10% $N_2O$ nitrided oxidation and PECVD deposition. The reverse characteristics of the SiC SBD with various oxide field plate were investigated.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.235-238
• /
• 2007

2차원 소자 시뮬레이터인 TMA 메디치를 이용하여 필드링와 깊은 접합 필드링에 대해 연구하였다. 이온 주입될 위치를 미리 트랜치 식각을 시킴으로써 항복전압 특성을 향상시킬 수 있었다. 시뮬레이션 결과 기존 필드링의 항복전압대비 깊은 접합 필드링 항복전압은 약 30%의 증가를 보였다. 깊은 접합 필드링은 같은 면적을 차지하는 조건하에서 설계 및 제작이 비교적 용이하고, 표면 전하의 영향도 적은 것으로 나타났다. 본 논문에서는 여러 분석을 통해 깊은 접합 필드링의 향상된 특성을 논하였다.

• 한국전기전자재료학회논문지
• /
• 제25권4호
• /
• pp.276-281
• /
• 2012

Power semiconductor devices are widely used as high voltage applications to inverters and motor drivers, etc. The blocking voltage is one of the most important parameters for power semiconductor devices. Generally most of field effect concentrations shows on the edge of power devices. Can be improve the breakdown characteristic using edge termination technology. In this paper, considering the variables that affect the breakdown voltage and optimization of parameters result for 600 V Super Junction MOSFET Field ring.

• Transactions on Electrical and Electronic Materials
• /
• 제18권4호
• /
• pp.199-202
• /
• 2017

Silicon carbide (SiC) is being spotlighted as a next-generation power semiconductor material owing to the characteristic limitations of the existing silicon materials. SiC has a wider band gap, higher breakdown voltage, higher thermal conductivity, and higher saturation electron mobility than those of Si. When using this material to implement Schottky barrier diode (SBD) devices, SBD-state operation loss and switching loss can be greatly reduced as compared to that of traditional Si. However, actual SiC SBDs exhibit a lower dielectric breakdown voltage than the theoretical breakdown voltage that causes the electric field concentration, a phenomenon that occurs on the edge of the contact surface as in conventional power semiconductor devices. Therefore in order to obtain a high breakdown voltage, it is necessary to distribute the electric field concentration using the edge termination structure. In this paper, we designed an edge termination structure using a field plate structure through oxide etch angle control, and optimized the structure to obtain a high breakdown voltage. We designed the edge termination structure for a 650 V breakdown voltage using Sentaurus Workbench provided by IDEC. We conducted field plate experiments. under the following conditions: $15^{\circ}$, $30^{\circ}$, $45^{\circ}$, $60^{\circ}$, and $75^{\circ}$. The experimental results indicated that the oxide etch angle was $45^{\circ}$ when the breakdown voltage characteristics of the SiC SBD were optimized and a breakdown voltage of 681 V was obtained.

• 한국전기전자재료학회논문지
• /
• 제24권4호
• /
• pp.261-265
• /
• 2011

This paper describes the fabrication and characteristics of a Au/Ni/Ti/3C-SiC Schottky diode with field plate (FP) edge termination. The Schottky contacts were annealed for 30 min at temperatures ranging from 0 to $800^{\circ}C$. At annealing temperature of $600^{\circ}C$, it showed an inhomogeneous Schottky barrier and had the best electrical characteristics. However, the annealing of $800^{\circ}C$ replaced it with ohmic behaviors because of the formation of many different types of nickel silicides. The fabricated Schottky diode had a breakdown voltage of 200 V, Schottky barrier height of 1.19 eV and worked normally even at $200^{\circ}C$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
• /
• pp.396-399
• /
• 2003

4H-SiC un diodes with field limiting rings(FLRs) were fabricated and characterized. The dependences of reverse breakdown voltage on the number of FLRs, the distance between p-base main junction and first FLR, and activation temperatures, were investigated. Al and B ions were implanted and activated at high temperature to form p-base region and p+ region in the n-epilayer. We have obtained up to 1782V of reverse breakdown voltage in the un diode with two FLRs on loom thick epilayer. The differential on-resistances of the fabricated diode are $5.3m{\Omega}cm^2$ at $100A/cm^2$ and $2.7m{\Omega}cm^2$ at $1kA/cm^2$, respectively. All pn diodes with FLRs have higher avalanche breakdown voltages than that of diode without an FLR. Regardless of the activation temperature, the un diode with a FLR located 5um apart from main junction has the highest mean breakdown voltage around 1600V among the diodes with one ring. On the other hand, the pn diode with two rings showed different behavior with activation temperature. It reveals that high voltage SiC pn diodes with low on-resistance can be fabricated by using the FLR edge termination.