• 한국항공운항학회지
• /
• 제25권2호
• /
• pp.18-24
• /
• 2017

Results of the experimental research are described in this thesis, which are about braking characteristics of aircraft ABS brake system with different ground conditions. Dynamo-tests were conducted with the state of the application aircraft condition and with two different ground conditions. The Braking characteristics on each ground condition were drawn from the results of occurrence of skid, braking distance and deceleration. The braking performance of the application aircraft could be anticipated and the efficient range of braking operation could be set with those results.

• Journal of Magnetics
• /
• 제20권4호
• /
• pp.421-426
• /
• 2015

This paper presents a practical method for estimation of average temperature in the permanent magnet (PM) of electric machine by using finite element analysis (FEA) and dynamo load experiment. First of all, the temperature effect of PM to the torque has been employed by FEA in order to evaluate the Temperature-Torque characteristic curve. The 1st order polynomial equation which is torque attenuation coefficient is derived by the FEA result of the Temperature-Torque curve. Next, torque saturation test with constant current condition is performed by dynamo load experiment. Then, the temperature trend can be estimated by adding the initial starting temperature using the torque attenuation coefficient and torque saturation curve. Lastly, estimated temperature is validated by infrared thermometer which measures temperature of PM surface. The comparison between the estimated result and experimental result gives a good agreement within a deviation of maximum $8^{\circ}C$.

• Journal of Biosystems Engineering
• /
• 제31권2호
• /
• pp.102-107
• /
• 2006

Opening agricultural market progresses radically, reducing cost of high quality agricultural products becomes urgent. Aerial application using an agricultural helicopter helps precise and timely spraying and reduces labor intensity and pollution. The development of an agricultural helicopter was necessary for taking advantages of both technique and economy. In this study, as the first stage of developing an unmanned helicopter capable of 20kg payload, an engine was selected and a prototype transmission was designed for an agricultural helicopter. Prony type dynamo-meter was constructed, the engine was tested and then performance curve was obtained. The centrifugal clutch was engaged at the rotation speed of 3,500-4,000 rpm. Maximum power was expected at the engine speed of 5,900-6,200 rpm when adjusted at the optimal output. Based on the test results, the transmission was designed for driving main rotor shaft.

• 한국생산제조학회지
• /
• 제4권2호
• /
• pp.12-17
• /
• 1995

The operation of heavy tracked vehicle has the problems in the steering that made by misoperations. The protection device is applied to the vehicles. But that device is applied to the vehicles. But that device has the engine stop and over load condition problems. the steering safety system is developed on the basis of clutch slip that proved the durability in the dynamo test and field test. The steering safety system caused the performance improvement of vehicles when steering.

• 한국재난정보학회 논문집
• /
• 제18권4호
• /
• pp.891-898
• /
• 2022

연구목적: 건설산업의 전 분야 및 전 단계에 대한 BIM 도입 의무화가 머지않아 시행될 만큼 BIM 업무의 실질적인 생산성 향상을 위한 기술 확보 방안이 필요하기 때문에 연구에서는 엔지니어가 BIM기반 설계 과정에서 건설기준을 검증할 수 있도록 BIM 모델링 절차별로 제작되는 주요 객체에 대해 자동으로 관련 건설기준을 검증할 수 있는 방안을 제시하였다. 연구방법: BIM기반 도로 설계 업무를 대상으로 모델링 업무 절차를 정의하고, 각 단계에서 도출되는 BIM 모델별로 관련 설계기준을 데이터베이스로 구축하는 방안을 마련하였다. 그리고 BIM기반 설계기준 검토 자동화 시스템 개발을 위한 프로세스도 제시하였다. 연구결과: Civil3D 및 Dynamo를 활용하여 BIM기반 설계기준 검토 자동화 모듈을 개발하고, 시범적용을 통해 설계과정에서 제작되는 BIM 객체의 건설설계기준 충족여부를 자동으로 신속하게 제공할 수 있음을 확인하였다. 결론: BIM기반 설계기준 검토 자동화 기술은 BIM 모델 제작 업무의 생산성 향상과 BIM 모델의 품질확보가 가능하다.

• 한국군사과학기술학회지
• /
• 제20권5호
• /
• pp.597-607
• /
• 2017

The general control method for Anti-lock Brake System(ABS) is that the wheel slip ratio is observed and the braking force is controlled in real time in order to keep the wheel slip ratio under the value of the best slip ratio. When a wheel runs on the state of the best slip ratio, the ground friction of the wheel approaches the highest value. The value of best slip ratio, theoretically, is known as the value between 10 and 20 % and it is dependant on the ground condition such as dry, wet and ice. It is an important parameter for the braking performance and affects the braking stability and efficiency. In this thesis, an experimental method is suggested, which is a reliable way to decide the best slip ratio through dynamo tests simulating aircraft taxiing conditions. The obtained best slip ratio is proved its validity by results of aircraft taxiing tests.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.517-525
• /
• 2011

In this study, the used DOCs, which could remove the air pollutants such as CO and HC in the exhaust gas from diesel vehicle, were remanufactured by various conditions. Their catalytic performances and characterization were also investigated. The remanufacturing process of the deactivated DOCs includes high temperature cleaning of incineration, ultrasonic cleaning for washing with acid/base solutions to remove deactivating materials deposited to the surface of the catalysts, and active component reimpregnation for reactivating catalytic activity of them. The catalytic performance tests of the remanufactured DOCs were carried out by the diesel engine dynamo systems and chassi dynamo systems in CVS-75 mode. All prepared catalysts were characterized by the optical microscopes, SEM, EDX, porosimeter and BET to investigate correlations between catalytic reactivity and surface characteristics of them. The remanufactured DOCs at various conditions showed the improved catalytic performances reaching to 90% of fresh DOC, which is attributed to remove the deactivating materials from the surface of the used DOC through the analysis of catalytic performance test and their characterization.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권1호
• /
• pp.67-76
• /
• 1998

Friction materials for brake linings and clutches have severe performance requirements. The principal function of such frictional elements is to convert kinetic energy to heat, and then either to absorb or to dissipate heat. In order to achieve these objectives, the coefficient of friction must be as high as possible, independent of variations in operating conditions, and the necessary energy conversion must be accomplished with a minimum of wear on the contacting parts. In this study, Al powder, Al bronze powder and Mo powder used in general for automobile brake was sprayed on automobile brake disc to restrain rust and to maintain friction performance. Dynamo and corrosion tests have been carried out. It is concluded that the sprayed disc with Al bronze powder has the most improved frictional performance and anti-corrosive characteristics. The main results obtained can be summarized as follows; 1. From the corrosion current density test for gray cast iron and sprayed disc with powders of Al, Al bronze and Mo, it was cleared that the spray treatment with Al bronze powder showed the most superior anti-corrosive characteristics than other powders. 2. By anode polarization toward the noble direction from corrosion potential, corrosion current density with sprayed brake disc by Al-bronze powder was the lowest. 3. Mean frictional coefficients obtained from dynamo test are as follows : the sprayed disc with Al(99.99%) powder was 0.190 ; the sprayed disc with Al-bronze powder was 0.312 ; the sprayed disc with Mo powder was 0.257 ; the non-sprayed disc of gray cast iron was 0.331. In the case of the sprayed disc Al-bronze powder showed the most excellent frictional characteristics . 4. Amount of burnish quantity obtained from burnish test by dynamometer is as follows : the sprayed disc with Al-powder was 1.079 mm : the sprayed disc with Al-bronze powder was 0.155 mm : the sprayed disc with Mo powder was 0.253 mm : the non-sprayed disc of gray cast iron was 0.241 mm. Al-bronze powder also showed the most excellent burnish characteristics.

• 한국산학기술학회논문지
• /
• 제17권8호
• /
• pp.157-163
• /
• 2016

현재 국내 건설사에서 일부 BIM을 적용하고 있지만, BIM도입에 따른 업무변화와 새로운 학습에 대한 막연한 거부감으로 업무에 적극적으로 활용되지 못하고 있다. 또한 설계단계에 작성된 BIM모델을 시공단계에 활용하기 위해서는 시공시 필요한 공정정보가 제공되어져야 하는데, 공정정보의 입력 체계와 활용 방법이 미비한 실정이다. 따라서 건설사의 BIM의 적극적 도입과 생산성 향상을 위해 본 연구는 BIM의 기본적인 정보를 건축 공정상의 흐름에 따라 필요한 정보가 쉽고 간편한 결과로 나타날 수 있도록 건설공정관리 BIM템플릿을 개발하였다. 이를 위해 작업분류체계(WBS)의 단위정보(주요단위, 세부단위, 상세단위)를 매개변수에 적용하여 공정별 기간별 공정진도 탐색기를 구성하고, 3D뷰 일람표를 생성하였다. 템플릿을 사용하기 위해 Dynamo를 활용하여 BIM모델 객체에 공정정보를 입력하는 방법을 고안하였다. 또한 건설공사의 자재별 물량을 쉽고 빠르게 산출 할 수 있도록 하였다. 건설공정관리 BIM템플릿을 검증하기 위해 실제 프로젝트에 적용하여 가시성과 일람표를 평가하였다. 그 결과 건설공정관리 BIM템플릿이 프로젝트 공정정보를 용이하게 관리할 수 있게 하여, 건설사의 BIM의 적극적 도입과 생산성 향상에 기여할 수 있다.

• 한국자동차공학회논문집
• /
• 제13권3호
• /
• pp.154-161
• /
• 2005

The durability of a vehicle is a very important performance which can be evaluated from endurance test. This study developed a procedure for determination of a duty cycle theoretically. Vehicle load data is classified and rearranged using standard test road profile. A load pattern and a duty cycles are extracted from classified vehicle data using genetic algorithm. A duty cycle could be utilized in dynamo test to meet required test mileage. The derived duty cycles have been verified by fatigue test through the dynamometer test.