DOI QR코드

DOI QR Code

Experimental Research on Finding Best Slip Ratio for ABS Control of Aircraft Brake System

항공기용 제동장치의 ABS 제어를 위한 최적 슬립율 결정에 관한 시험적 연구

  • Yi, Miseon (The 7th Research and Development Institute, Agency for Defense Development) ;
  • Song, Wonjong (The 7th Research and Development Institute, Agency for Defense Development) ;
  • Choi, Jong Yoon (The 7th Research and Development Institute, Agency for Defense Development)
  • 이미선 (국방과학연구소 제7기술연구본부) ;
  • 송원종 (국방과학연구소 제7기술연구본부) ;
  • 최종윤 (국방과학연구소 제7기술연구본부)
  • Received : 2017.03.31
  • Accepted : 2017.09.08
  • Published : 2017.10.05

Abstract

The general control method for Anti-lock Brake System(ABS) is that the wheel slip ratio is observed and the braking force is controlled in real time in order to keep the wheel slip ratio under the value of the best slip ratio. When a wheel runs on the state of the best slip ratio, the ground friction of the wheel approaches the highest value. The value of best slip ratio, theoretically, is known as the value between 10 and 20 % and it is dependant on the ground condition such as dry, wet and ice. It is an important parameter for the braking performance and affects the braking stability and efficiency. In this thesis, an experimental method is suggested, which is a reliable way to decide the best slip ratio through dynamo tests simulating aircraft taxiing conditions. The obtained best slip ratio is proved its validity by results of aircraft taxiing tests.

Keywords

References

  1. S. Y. Lee, J. G. Lee, Y. M. Kim, J. S. Choi, C. B. Kim, J. Y. Kim, J. W. Lee, H. Y. Park, "The Development of ABS Control Vavle for XKT-1 Aircraft," KSAS Fall Conference, pp. 305-308, Nov, 2005.
  2. J. H. Shin, K. C. Lee, "The Development of Dynamic Modeling & Controller for Aircraft ABS," KSME Fall Conference, pp. 106-113, 2007.
  3. J. C. Lee, J. H. Kim, W. J. Song, D. H. Yim, K. R. Joo, S. Y. Park, M. S. Seo, "Dynamic Modeling and Simulation for the Development of Aircraft ABS System," KSAS Fall Conference, pp. 2011-2015, Nov, 2015.
  4. D. S. Yun, S. H. Baek, H. S. Kim, J. H. Song, K. S. Boo, "Brake Performance Analysis of Sliding Mode Controller by Comparing with a Commercial Anti-lock Brake System," Transaction of the Korean Society of Automotive Engineers, Vol. 18, No. 2, 2010.
  5. J. S. Kim, "ABS Sliding Mode Control considering Optimum Road Friction Force of Tyre," Transaction of the Korean Society of Automotive Engineers, Vol. 21, No. 1, 2013.
  6. M. Tanelli, L. Piroddi, S. M. Savaresi, "Real-Time Identification of Tire-Road Friction Conditions," IET Control Theory and Applications, Vol. 3, No. 7, pp. 891-906, 2008.
  7. Ricardo de Castro, Rui Araujo, Diamantino Freitas, "Optimal Linear Parameterization for On-Line Estimation of Tire-Road Friction," Preprints of the 18th IFAC World Congress Milano(Italy), pp. 8409-8414, 2011.
  8. Ricardo de Castro, Rui Araujo, Diamantino Freitas, “Wheel Slip Control of EVs Based on Sliding Mode Technique With Conditional Integrators,” IEEE Transaction on Industrial Electronics, Vol. 60, No. 8, pp. 3256-3271, 2013. https://doi.org/10.1109/TIE.2012.2202357
  9. H. R. Kang, J. H. Song, P. S. Oh, "A Study on the Physical and Thermodynamics Effect of Braking for Light Aircraft(FAR23) by Dynamo Test," KSAS Spring Conference, pp. 701-704, 2016.
  10. M. G. Kam, S. K. Kang, W. I. Kim, "Development of Brake disc using CFRC on Anti-lock Brake System of Aircraft," KISA Annual Conference, pp. 21-26, 2007.
  11. M. R. Ryu, H. E. Bae, H. S. Kim, D. H. Lee, S. B. Lee, J. H. Park, "A Study on Braking Performance of Break Disc," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 12, No. 3, pp. 13-20, 2013.
  12. U. Kienche, and L. Nielsen, "Automotive Control Systems For Engine, Driveline, and Vehicle," Springer Verlag, 2000.
  13. N. S. Curry, "Aircraft Landing Gear Design : Principles and Practices," AIAA Education Series, 1988.
  14. J. W. Jeon, Y. J. Kim, “Development Situation of ABS System,” Journal of the Korean Society of Automotive Engineers, Vol. 26, No. 5, pp. 11-16, 2004.
  15. K. C. Lee, J. W. Jeon, D. H. Hwang, Y. J. Kom, D. H. Gu, "Braking Efficiency Calculation of Antiskid Brake System of a Fixed-Wing Aircraft," KIEE Annual Conference, pp. 222-224, Oct, 2005.
  16. S. C. Chapra, R. P. Canale, "Numerical Methods for Engineers," McGraw-Hill, 1985.
  17. T. U. Kim, S. K. Lee, J. Y. Yang, S. J. Jung, S. H. Oh, "The Load Calibration Test for Landing Load Prediction," KSAS Fall Conference, pp. 124-129, Nov, 2012.
  18. M. K. Lee, J. W. Lee, D. H. Yoon, J. H. Kim. "Development of Compressive Failure Strength for Composite Laminate Using Regression Analysis Method," Transaction of the Korean Society of Mechanical Engineers-A, Vol. 40, No. 10, pp. 907-911, 2016. https://doi.org/10.3795/KSME-A.2016.40.10.907
  19. H. G. Bae, J. S. Park, Y. I. Kim, "Study for Prediction of Flight Loads using Least Square Method," KSAS Fall Conference, pp. 599-603, Nov, 2004.
  20. M. G. Kang, “Development of Empirical Correlation to Calculate Pool Boiling Heat Transfer Coefficient on Inclined Tube Surface,” Transaction of the Korean Society of Mechanical Engineers-B, Vol. 40, No. 8, pp. 527-533, 2016. https://doi.org/10.3795/KSME-B.2016.40.8.527