• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1291-1293
• /
• 2004

The control method of programmable dynamometer for overall test of machine is to load the reference torque which is computed from torque transducer into motor under test. But the torque information detected from torque transducer have a lot of noise when the load torque of meter is a small quantity or changing. Thus, torque transducer must have a low pass filter to detect a definite torque information. But The torque delay generated by filter with torque transducer occur a torque trouble for moter torque of programmable dynamometer. Therefore, this kind of system could not perform dynamic and nonlinear load. In this paper, the control method using the load torque observer without a measure for torque transducer is proposed. The proposed system improved the problem of the torque measuring delay with torque transducer, and the load torque is estimated by the minimal order state observer based on the torque component of the vector control induction meter. Therefore, the torque controller is not affected by a load torque disturbance.

• Korean System Dynamics Review
• /
• v.11 no.4
• /
• pp.117-142
• /
• 2010

National territorial policies require a series of dynamic simulations, which would facilitate effectiveness measuring and forecasting works geared towards territorial policies under consideration or implementation. This paper aims at designing an integrated prototype for the proposed territorial policies. After the simulation exercises for the Ochang Industrial Complex(OIC) in Chungbuk Province, this study firstly finds meaningful mismatch phenomena between housing and population increases as the in-migration time lag seems inevitable even after the housing construction is in a mature state. Secondly, the OIC development exerts more significant impact on the number of employees than that of business units. Thirdly, in- and out-migration orders are different during the first and second stages of OIC development. That is, Chungbuk Province records the largest in terms of in-migration volume, followed by the Capital and Non-Capital Regions. Even though Chungbuk Province ranks the top position in the out-migration volume, the rank of the Capital and Non-Capital Regions is reversed: the our-migration volume towards the Non-Capital Region outruns that of the Capital Region.

• International Journal of Automotive Technology
• /
• v.7 no.3
• /
• pp.309-314
• /
• 2006

In this paper, the ride comfort from a computer simulation was compared to the experimental result. For measuring ride comfort of a passenger car, acceleration data was obtained from the floor and seat during highway running with different speeds. The measured acceleration components were multiplied by the proper weighting functions, and then summed together to calculate overall ride values. Testing several passenger cars, the ride comforts were compared. In order to investigate the effect of vibration signals on the steering wheel, an apparatus to measure the vibrations and weighting functions on the steering wheel were designed. The effect of the steering accelerations on the ride comfort were investigated and added for the overall ride comfort. For the computer simulations, Korean dummy models were developed based on the Hybrid III dummy models. For the Korean dummy scaling, the national anthropometric survey of Korean people was used. In order to compare and check the validity of the developed Korean dummy models, dynamic responses were compared to those of Hybrid III dummy models. The computer simulation using the MADYMO software was also compared to the experimental results.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1152-1158
• /
• 2007

Although various fast and simple, testing devices have been developed in many countries such as the U.S, Japan, and European countries, these testing devices are not commonly used in Korea. In this study, compaction fur the field density test was carried out with a hand-guided vibrating roller. The results of the field density test were compared with those of the new testing devices such as the geogauge, soil impact hammer(CASPFOL), light falling weight deflectometer(LFWD), dynamic cone penetration(DCP). Regression analyses were conducted with the data from new testing devices. The analysis results showed that the correlation coefficients were high in the range of $70{\sim}95%$.

• Journal of Power System Engineering
• /
• v.10 no.4
• /
• pp.56-64
• /
• 2006

This paper shows the development process of a straight-type five-hole pressure probe for measuring three-dimensional flow velocity components. The data reduction method using a bi-cubic curve-fitting program in a new calibration map was introduced in this study. This new calibration map can be applied up to the application angle, ${\pm}55^{\circ}$ of a probe. As a result, for the application angle of ${\pm}45^{\circ}$, an error for yaw and pitch angles appeared from $-1.76^{\circ}\;to\;1.83^{\circ}$ and from $-1.91^{\circ}\;to\;1.75^{\circ}$, respectively. Moreover, an error for a vector magnitude and a static pressure compared with a dynamic one showed from -7.83% to 4.87% and from -0.73 to 0.77, respectively. Even though this data reduction method showed unsatisfactory errors in a vector magnitude, it resulted in an easy and simple application method. Especially, when it was applied to an actual flow field including a swirling flow, a good result came out on the whole. However, in order to obtain a better result, it is thought that a more sophisticated interpolation method needs to be introduced.

• Korean Journal of Metals and Materials
• /
• v.50 no.8
• /
• pp.591-597
• /
• 2012

This paper presents regularly micro-textured glass surfaces ensuring the superhydrophobic properties in the Cassie-Baxter regime. The proposed surfaces were fabricated simply and efficiently by filling the glass material into a silicon micro-mold with periodic micro-cavities based on a thermal-reflow process, resulting in a successful demonstration of the textured glass surface with periodically-arrayed micro-pillar structures. The static and dynamic wetting properties of the micro-textured glass surfaces were characterized by measuring the static contact angle (SCA) and contact angle hysteresis (CAH), respectively. In addition, the surface wettability was estimated theoretically based on Wenzel and Cassie-Baxter wetting theories, and compared with the experimental ones. Through the experimental and theoretical observations, it was clearly confirmed that the proposed micro-textured glass surfaces showed the slippery superhydrophobic behaviors in the Cassie-Baxter wetting mode.

• Journal of the Korean Society of Mechanical Technology
• /
• v.13 no.1
• /
• pp.23-29
• /
• 2011

The measurement of ice properties such as thickness, strength are important to know the performance of the ice breaking vessel. The measuring equipment of ice properties and methods are summarized in this paper. The actual measured data are also described. The strength of ice at Svalbard area on April 2010 is much stronger than the Chukchi Sea on August 2010. The mean strength of Svalbard is about 500 kPa and one of Chukchi Sea is 250 kPa. The first sea trial in Arctic sea using Araon was carried out in the Chukchi Sea. The power and speed was also measured to check the ship performance in ice. The speed was measured from GPS(Global Positioning System) and engine power was recorded from DPS(Dynamic Positioning system) of Araon. The design target of Araon in level ice is 3 knots in 1m thickness and 630 kPa flexible strength but mean speed in Chuckchi sea is 3.98 knots when 6.6 MW engine power, 2.4m ice thickness and 250 kPa strength. This results comes from the difference of ice types and the weak flexible strength of ice but it will be a good information to know the performance of Araon in similar ice condition.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.3
• /
• pp.63-71
• /
• 2019

PURPOSE: This study was examined the effects of coordinative locomotor training (CLT) on the postural imbalance and gait in children. METHODS: Four children were sampled as subjects. A single subject study (A-B-A') was conducted by measuring the following: baseline five sessions;, intervention phase, 15 sessions;, and postline (A') five sessions. The research period was eight weeks. The CLT program consisted of warming-up exercise, main exercise, and finishing exercise, and it was performed for one hour per day. A oneleg standing test (OLST) was performed determine the static balance. A functional reach test (FRT) was performed determine the reactionary balance. To determine the dynamic balance, the time up and go test (TUG) was performed. A 10m walking test (10 MWT) was performed to determine the walking ability. A statistical test was performed through descriptive statistics to present the average and standard deviation, and the variation rate was compared using a visual analysis method with graphs. RESULTS: As a result of CLT application, all four subjects improved the OLST, FRT, TUG, and 10 MWT compared to the intervention period baseline, and postline period. CONCLUSION: CLT appeared to improve the posture imbalance and gait in children.

• Advances in Computational Design
• /
• v.4 no.1
• /
• pp.1-13
• /
• 2019

Recent generations of smartphones offer accelerometer sensors as a standard feature. While this has led to the development of a number of related applications (apps), there has been no study on their comparative or individual performance against a benchmark. This paper investigates the comparative performance of a number of smartphone accelerometer apps amongst themselves and to a calibrated benchmark accelerometer. A total of 12 apps were selected for testing out of 90 following an initial review. The selected apps were subjected to sinusoidal vibration testing of varying frequency and the response of each compared against the calibrated baseline accelerometer. The performance of apps was quantified using analysis of variance (ANOVA) and test of significance was carried out. The apps were then compared for a realistic dynamic scenario of measuring the acceleration response of a bridge due to the passage of a French Train $\grave{a}$ Grande Vitesse (TGV) in a laboratory environment.

• Journal of Information Technology Applications and Management
• /
• v.26 no.1
• /
• pp.95-102
• /
• 2019

Public transportation systems play key roles in supporting dynamic activities and interaction between urban places. Especially, high efficient public transportation systems are required in order to support large traffic demands in urban areas. In this paper, we define a new metric, structural activation level (SAL), to replace the conventional transportation share ratio (TSR) measuring efficiency of public transportation systems. First of all, we access the Korea Transport Database (KTDB) and download origin-destination data by transport types to construct traffic networks with respect to transport types for each city. Then, we calculate the QAP (Quadratic Assignment Procedure) correlation between each traffic network and the total traffic network for each city to investigate SAL by comparing cities one another. The results of our investigation reveal inconsistency between TSR and SAL. In Daegu, TSR of public transportation systems is relatively low while SAL is high. In Deajeon, however, SAL is low while TSR is high. Therefore, we suggest to take into consideration SAL as well as TSR in order to investigate the degree of activation of public transportation.