• Korean Chemical Engineering Research
• /
• 제52권1호
• /
• pp.88-91
• /
• 2014

본 연구에서는 Nannochloropsis oceanica로부터 바이오디젤 원료유로 활용하기 위한 미세조류 오일을 추출하였다. 용매추출법을 이용하여 오일을 추출하였으며, 미세조류의 건식 및 습식 조건에서 오일 추출률(yield) 및 오일 추출 효율(efficiency)을 비교하였다. N. oceanica는 지방산 함량이 317.8 mg/g cell으로 건조중량 대비 30% 이상의 높은 오일함량을 나타내었으며, 미세조류의 건식 조건에서 습식 조건보다 높은 오일 추출률을 나타내었다. 사용된 용매에 대해서 헥산 < 헥산-메탄올 < 클로로포름-메탄올 순으로 오일 추출률이 증가하였다. 그러나 추출된 오일의 지방산 함량을 분석한 결과, 오일 추출률이 증가할수록 지방산 함량은 감소하여 엽록소와 같은 불순물을 포함하고 있는 것으로 나타났다. 따라서 오일 추출률과 지방산 함량을 고려한 오일 추출 효율은 건식 조건에서 헥산-메탄올 이용 추출에서 82.6%의 가장 높은 효율을 나타내었고, 습식 조건에서는 클로로포름-메탄올 이용 추출에서 88.0%로 가장 높은 효율을 나타내었다. 따라서 경제적으로 미세조류의 건조가 가능한 경우에는 헥산-메탄올을 사용하고, 건조 비용이 높은 경우에는 습식 조건에서 클로로포름-메탄올을 사용한 용매추출법이 바람직하다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.171-171
• /
• 2012

In this study, we fabricated the high-brightness AlGaInP-based red light emitting diodes (LED)s using by direct printing technique and inductive coupled plasma (ICP) reactive ion etching (RIE). In general, surface roughening was fabricated by wet etching process to improve the light extraction efficiency of AlGaInP-based red LED. However, a structure of the surface roughening, which was fabricated by wet etching, was tiled cone-shape after wet etching process due to crystal structure of AlGaInP materials, which was used as top-layer of red LED. This tilted cone-shape of surface roughening can improve the light extraction of LED, but it caused a loss of the light extraction efficiency of LED. So, in this study, we fabricated perfectly cone shaped pattern using direct printing and dry etching process to maximize the light extraction efficiency of LED. Both submicron pattern and micron pattern was formed on the surface of red LED to compare the enhancement effect of light extraction efficiency of LEDs according to the diameter of sapphire patterns.After patterning process using direct printing and ICP-RIE proceeded on the red LED, light output was enhanced up to 10 % than that of red LED with wet etched structure. This enhancement of light extraction of red LED was maintained after packaging process. And as a result of analyze of current-voltage characteristic, there is no electrical degradation of LED.

• KSBB Journal
• /
• 제25권4호
• /
• pp.371-378
• /
• 2010

For the biodiesel fuel production from microalgae, the lipid from wet and dry samples of green algae Scenedesmus sp. was extracted by using various solvents and pre-treatment methods. Extraction yield of the lyophilized sample was better than that of dry sample. Chloroform/methanol (2:1, v/v) and ultrasonication or homogenization method were also selected as the most effective solvent and pre-treatment methods for lipid extraction, respectively. Under these constraint conditions, optimization experiment of lipid extraction was investigated by Taguchi approach using orthogonal matrix $L_9$ ($3^4$) method. The optimum extraction conditions of lipid extraction was obtained at pre-treatment of homogenization, extraction time of 5 hour, temperature of $35^{\circ}C$, and solvent ratio of 1:20 (w/v). Yield of extraction at optimized condition was 20.55% and it was 96% of total lipid content (21.38%) of Scenedesmus sp.

• 한국대기환경학회지
• /
• 제20권4호
• /
• pp.483-491
• /
• 2004

The purpose of this study is to develop an ozone passive sampler and to evaluate its performance p-Acetamidophenol using as the reagent for ozone reacts specifically with the ambient ozone to produce a fluorescence material (p-acetamidopheonl dimer). The volume of absorbent solution and the extraction time determined at suitable conditions for measuring ozone were 100$\mu$L and 60 min, respectively. The changes of fluorescence were observed with incresing the storage period of passive samplers in ambient air. but the cool storage in a refrigerator did not remarkably influence the increase of fluorescence. The measurement for the precision oi the passive sampling was carried out with duplicate measurement of passive samplers. The intra-class correlation coefficients of passive samplers using dry and wet filters were 0.992 and 0.962, respectively The results from field validation tests indicated practical agreement (dry filter: r=0.963, wet filter: r=0.995) between the passive sampler and an UV photometric $O_3$ analyzer. The limit of quantification of ozone passive samplers with sampling time of 8 hr (wet filter) and 24 hr (dry filter) were 8.0 ppb and 2.7 ppb, respectively.

• 한국의류산업학회지
• /
• 제3권5호
• /
• pp.466-472
• /
• 2001

To find a suitable condition in this process examined, we investigated the main control factors, such as, the NaOH concentrations, such as, the NaOH concentrations, the heat treating times, and the heating temperatures. The resulting mechanical properties of the fabrics also studied. The samples used were Nylon/Co-PET sea-island type composite microfiber (Co-PET content: 35%) non-woven fabric. The conclusions obtained were as follows. 1. For the complete extraction of Co-PET from the sample non-woven fabric in the dry hot air process, $160^{\circ}C$ of air temperature, 15 min. of treatment time, and around 30% of NaOH concentration were required. On the other hand, in the wet hot air process, $140^{\circ}C$ of air temperature, 3.5 min. of treatment time, and around 30% of NaOH concentration were required. 2. The mechanical properties of the continuous processed samples showed that the WT, B, and WC increased with increasing the weight reduction ratio. However, the G, decreased with increasing the weight loss ratio. Note that, particularly in B, it increased drastically when the weight deduction ratios exceeded 30%. 3. As increasing the wet hot air temperature from 130 to $140^{\circ}C$, B appeared to increase, however, WT, G, and WC appeared to decrease. 4. The best condition found in this continuous process to extract Co-PET is the wet hot air temperature of 140, NaOH concentration of 28% or above, and the treatment time 2-4 min.

• Transactions on Electrical and Electronic Materials
• /
• 제14권6호
• /
• pp.304-307
• /
• 2013

Reverse engineering of semiconductor devices utilizes delayering processes, in order to identify how the interconnection lines are stacked over transistor gates. Cu metal has been used in recent fabrication technologies, and de-processes becomes more difficult with the shrinking device dimensions. In this article, reverse engineering technologies to reveal the Cu interconnection lines and Cu via-plugs embedded in dielectric layers are investigated. Stacked dielectric layers are removed by $CF_4$ plasma etching, then the exposed planar Cu metal lines and via-plugs are selectively delineated by wet chemical solution, instead of the commonly used plasma-based dry etch. As a result, we have been successful in extracting the layouts of multiple layers within a system IC, and this technique can be applicable to other logic IC, analog IC, and CMOS IC, etc.

• Journal of the Optical Society of Korea
• /
• 제18권3호
• /
• pp.283-287
• /
• 2014

Square lattice nano-hole arrays with diameters and periodicities of 200 and 500 nm, respectively, are fabricated on InGaN/GaN blue light emitting diodes (LEDs) using electron-beam lithography and inductively coupled plasma reactive ion etching processes. Cathodoluminescence (CL) investigations show that light emission intensity from the LEDs with the nano-hole arrays is enhanced compared to that from the planar sample. The CL intensity enhancement factor decreases when the nano-holes penetrate into the multiple quantum wells (MQWs) due to the plasma-induced damage and the residues. Wet chemical treatment using KOH solution is found to be an effective method for light extraction from the nano-patterned LEDs, especially, when the nano-holes penetrate into the MQWs. About 4-fold CL intensity enhancement factor is achieved by the KOH treatments after the dry etching for the sample with a 250-nm deep nano-hole array.

• KSBB Journal
• /
• 제23권6호
• /
• pp.513-518
• /
• 2008

재조합 대장균으로부터 베타-카로틴을 추출/정제하고 정제된 베타-카로틴의 주름개선 성능을 평가하였다. 탈수 용매, 추출 용매에 따른 추출량의 큰 변화는 발견되지 않았으나, wet-cell cake으로부터 추출한 경우가 dry cell로부터 추출한 경우에 비하여 2배 많은 양의 베타-카로틴이 추출되었다. 5 g의 wet-cell cake을 파쇄하고, 아세톤으로 탈수한 후, isobutyl acetate로 추출한 결과 36 mg의 베타-카로틴이 추출되었는데, 이는 61.2% 회수율에 해당한다. 베타-카로틴의 결정을 생성시키고 이를 분리한 결과 순도가 증가하였다. 재조합 대장균 배양액 2.5 L로부터 얻은 wet-cell cake 223 g의 탈수, 세포 파쇄 후 세포 잔사물로부터 베타-카로틴 추출, 농축, 결정화 등을 통하여 최종적으로 순도 93%인 베타-카로틴 결정 633 mg을 얻었다. 사람섬유아세포 배양을 통하여 정제된 베타-카로틴의 세포 독성 및 콜라겐 합성에 미치는 영향을 조사하였다. $1.7{\mu}M$의 베타-카로틴을 첨가 시 세포에 독성을 거의 나타내지 않았으며 콜라겐 합성양은 첨가하지 않은 경우에 비하여 1.4배 증가하였다. 본 결과는 저 유독성 용매를 사용하고 기존보다 간단한 방법을 사용하여 재조합 대장균으로부터 고순도의 베타-카로틴을 정제할 수 있고 이를 기능성 화장품의 주름개선제로 사용될 수 있음을 시사한다.

• 복식문화연구
• /
• 제11권6호
• /
• pp.902-912
• /
• 2003

The purpose of this research was two-folds; first, to investigate the type of soil contaminated in the Hunsang excavated from the Milchang-gun burial of Mapo for the purpose of proposing the adequate washing method, second, to utilize the chemical degradation result obtained from the previous research to identify the natural dye source used in the Hunsang textile. The application of KS K0251 test showed that the soil was more oleophilic than hydrophilic thus indicating that wet cleaning was more adequate that dry cleaning for the removal of Hunsang soil. The GC-MS result of the Hunsang extraction showed dimethyl phthalate and 2,4-di-tert-butylphenol as its degradation product and these coincided with the degradation products from the alizarin standard data of previous research. The comparison of the two suggested that it is likely that Hunsang was dyed with madder which has alizarin as its major chromophore.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2006년도 총회 및 춘계학술발표회
• /
• pp.407-410
• /
• 2006

Studies were performed on evaluating the applicability of activated carbon bugs on dye tracer tests as tracer detectors by using its adsorption isotherm of the grained activated carbon. We preliminary conducted several standard adsorption and extraction tests and obtained the relationship between standard dye solution and detected concentrations from activated carbon samples in dry and wet conditions. the slopes of the regression line were 0.71 for wet condition and 0.74 for dried one. Field dye tracer tests were performed in a karst area, where several faults occur along a stream and pass the test area. We sampled water samples and activated carbon samples at three points in Hwangji Pond, where groundwater outflows from the karst conduit. According to the results of breakthrough curve analysis, the regional flow along the conduit, which is assumed to cause a karst conduit, was estimated as 0.18 m/day. The relationship between the concentrations of water sample and extracted activated carbon bugs shows the similar slopes with those from standard solution tests. This suggests that activated carbon could be useful as a dye tracer detector because the extraced concentration can be quantified.