• 한국표면공학회지
• /
• 제44권6호
• /
• pp.260-263
• /
• 2011

GZO/ITO double layered films were deposited on unheated non-alkali glass substrates by RF magnetron sputtering using an ITO ($SnO_2$: 10 wt%) and GZO($Ga_2O_3$: 5.57 wt%) ceramic targets, respectively. The electrical resistivity of GZO/ITO films depends on the thickness ratio between the GZO film and ITO film. With increasing ITO film thickness, the resistivity of GZO/ITO films decreased which due to large increase in the Hall mobility. Also, the crystallinity of GZO/ITO film was improved with an increase in ITO thickness which was evaluated by X-ray diffraction. The average transmittance of the films was more than 85% in the visible region, which is slightly higher than ITO single layer films.

• 폴리머
• /
• 제39권3호
• /
• pp.514-521
• /
• 2015

본 연구는 자동차, 건축, 디스플레이 부품 접합 등에 사용되는 다층구조형 양면 점착테이프에 대한 것으로 UV 경화에 의해 제조된 아크릴폼 기재에 용제 건조형 점착제(AD)를 양면에 붙이고 피착제 종류에 따른 박리강도와 전단접착강도를 고찰하였다. AD 종류와 기재 조성에 따른 접착력 변화 및 피착재로 사용한 플라스틱에 대한 접착력을 고찰한 결과, AD의 분자량(MW)이 증가할수록 박리강도 및 전단접착강도가 증가하였으나 약 65만 이상의 MW를 가진 AD는 접착력이 감소하는 거동을 보였다. 양면 점착테이프에 사용된 AD층 두께가 얇을수록 온도감소와 함께 높은 물성 값을 보였다. 기재와 AD와의 계면접합 특성은 MW 615000(AD-4)을 사용한 것이 가장 우수하였으며, MW가 615000보다 낮으면 기재인 아크릴 폼과의 계면이 분리되는 결과를 보였다. 따라서 본 연구에서 검토한 다층구조형 양면 점착테이프는 표면에너지가 낮은 플라스틱 부품 및 곡면 부위에 적용가능한 산업분야에 유용하게 사용될 수 있을 것으로 판단된다.

• 폴리머
• /
• 제36권6호
• /
• pp.699-704
• /
• 2012

경구투여를 통한 친수성 약물의 방출조절을 위하여 이중층으로 된 고분자 담체를 설계하였다. 생체고분자인 alginate와 chitosan은 각각 극성 흡수성분으로, poly(D,L-lactide)는 소수성 피막으로, 그리고 theophylline과 diclofenac sodium은 모델 약물로 사용하였다. 담체는 지연방출과 이어지는 지속방출을 위하여 외부 껍질은 poly(D,L-lactide)로, 내부중심은 약물과 함께 알지네이트 또는 키토산으로 구성되어진 이중층의 미립구 담체로 성형하였다. 담체와 약물간의 극성 조합으로 인한 담체의 모폴로지와 약물방출 거동을 조사하였다. 담체와 약물 그리고 pH 환경의 상대적 극성이 약물방출 특성에 상당한 영향이 있음을 확인하였다.

• Environmental Engineering Research
• /
• 제15권3호
• /
• pp.149-156
• /
• 2010

The objective of this study was to investigate microbial removal using layered double hydroxides (LDHs) and iron (hydr)oxides (IHs) immobilized onto granular media. Column experiments were performed using calcium alginate beads (CA beads), LDHs entrapped in CA beads (LDH beads), quartz sand (QS), iron hydroxide-coated sand (IHCS) and hematite-coated sand (HCS). Microbial breakthrough curves were obtained by monitoring the effluent, with the percentage of microbial removal and collector efficiency then quantified from these curves. The results showed that the LDH beads were ineffective for the removal of the negatively-charged microbes (27.7% at 1 mM solution), even though the positively-charged LDHs were contained on the beads. The above could be related to the immobilization method, where LDH powders were immobilized inside CA beads with nano-sized pores (about 10 nm); therefore, micro-sized microbes (E. coli = 1.21 ${\mu}m$) could not diffuse through the pores to come into contact with the LDHs in the beads, but adhere only to the exterior surface of the beads via polymeric interaction. IHCS was the most effective in the microbial removal (86.0% at 1 mM solution), which could be attributed to the iron hydroxide coated onto the exterior surface of QS had a positive surface charge and, therefore, effectively attracted the negatively-charged microbes via electrostatic interactions. Meanwhile, HCS was far less effective (35.6% at 1 mM solution) than IHCS because the hematite coated onto the external surface of QS is a crystallized iron oxide with a negative surface charge. This study has helped to improve our knowledge on the potential application of functional granular media for microbial removal.

• Environmental Engineering Research
• /
• 제17권3호
• /
• pp.133-138
• /
• 2012

Polyvinyl alcohol/alginate hydrogel beads containing Mg-Al layered double hydroxide (LDH-PVA/alginate beads) were synthesized for phosphate removal. Results showed that blending PVA with the LDH-alginate beads significantly improved their stability in a phosphate solution. The kinetic reaction in LDH-PVA/alginate beads reached equilibrium at 12 hr-post reaction with 99.2% removal. The amount of phosphate removed at equilibrium ($q_e$) was determined to be 0.389 mgP/g. The equilibrium data were described well by the Freundlich isotherm with the distribution coefficient ($K_F$, 0.638) and the constant (n, 0.396). Phosphate removal in LDH-PVA/alginate beads was not sensitive to solution pH. Also, the removal capacity of LDH-PVA/alginate beads ($q_e$, 1.543 mgP/g) was two orders of magnitude greater than that of PVA/alginate beads ($q_e$, 0.016 mgP/g) in column experiments. This study demonstrates that LDH-PVA/alginate beads with a higher chemical stability against phosphate compared to LDH-alginate beads have the potential for phosphate removal as adsorptive media.

• 폴리머
• /
• 제38권4호
• /
• pp.544-549
• /
• 2014

이중층 필름 구조로서 상부에 폴리실록산 층과 하부에 폴리이미드 층을 갖는 내열 점착 필름을 제조하였다. 이중층 필름제조 과정에서 폴리실록산이 용해된 tetrahydrofuran(THF) 용액이 폴리이미드 층 상부에 도포된 이후, 상온~$80^{\circ}C$ 온도범위에서 에이징(aging) 과정을 거쳐 두 층 사이에서 나노 상분리에 의한 도메인이 500 nm 두께의 중간층으로 형성되었고 이에 대한 모폴로지는 투과전자현미경을 통해 조사되었다. 이러한 중간층 형성을 통해 상부 폴리실록산은 균일하고 안정적 층을 형성함으로 재현성 있는 점착특성을 나타내었으며, $300^{\circ}C$ 처리에서도 8-13 g/inch의 점착성질을 나타내었다. 또한 이중층 폴리이미드/폴리실록산과 나노 도메인 중간층 구조를 갖는 필름은 안정된 단일 박막으로 얻어지며 $435^{\circ}C$의 높은 열분해 온도를 가지고, $300^{\circ}C$에서 점착특성이 유지되는 결과를 보여 마이크로일렉트로닉스의 공정 조건에 적합한 활용 가능성을 보였다.

• 한국결정성장학회지
• /
• 제8권2호
• /
• pp.221-226
• /
• 1998

$RuO_2$ 하부전극 상에 형성된 $(Ba, Sr)TiO_3$[BST] 박막의 물성을 향상시키기 위하여 비정질 BST층(30, 70nm)을 $RuO_2$와 BST사이에 증착하여 2중 BST구조를 형성시켰다. 비정질 BST층의 도입을 통해, BST박막의 평균 입도가 증가하고, 표면 거칠기가 감소하여 전체 BST 박막의 미세구조와 표면 mophology가 단일 BST박막에 비해 상당한 변화가 발생함을 확인하였다. 30nm의 비정질측이 적용된 BST박막의 경우, 하부기판의 영향으로부터 비교적 자유로운 미세구조를 갖는 BST 박막이 형성되었다. 2중 BST 박막의 경우 유전상수는 340, 누설전류는 $6.85{\times}10^{-7}A/{\textrm}{cm}^2$로서 비정질층을 갖지 않는 단일 BST 박막에 비하여(유전상수: 152, 누설전류: $1.25{\times}10^{-5}A/{\textrm}{cm}^2$)놀라운 전기적 특성의 향상이 이루어짐을 확인하였다.

• 한국전자파학회논문지
• /
• 제18권10호
• /
• pp.1136-1141
• /
• 2007

본 논문에서 는 Sendust와 $Al(OH)_3$를 이용하여 전파 흡수체를 제작하였으며, 지지재로는 CPE(Chlorinated Polyethylene)를 이용하였다. 주 재료인 Sendust에 $Al(OH)_3$를 0 wt.%, 3 wt.%, 5 wt.%, 7 wt.%만큼 혼합하여 그 특성을 파악하였다. 그 결과 $Al(OH)_3$의 양이 5 wt.%일 때 전파 흡수 특성이 가장 향상되는 것을 알 수 있었다. 그리고 이 특성을 이용하여 적층형 전파 흡수체를 만들었으며, 두께 2 mm인 전파 흡수체가 무선 LAN사용 주파수인 2.4 GHz에서 전파 흡수능 18.5 dB의 특성을 보였다.

• 복식
• /
• 제59권9호
• /
• pp.26-42
• /
• 2009

The purpose of this study is to examine how to sew the hem of men's coat which were excavated from the Yeosan Song Clan's tombs that are thought to be formed between the late 15th and the late 16th centuries, findings of the study can be summarized as follows. 1. Andan, or inside facing was used to prevent the hem from being worn or swollen or to make the hem properly arranged. It was generally used for single-layered and cotton-quilted coat for men. Deotdan was used mainly for men's coat having oblique cutting lines and jemuldan for those having straight cutting lines. In single-layed coat for men, the width of andan was widened a little as the times moved from the late 15th to the late 16th century, but in cotton-quilted ones, the width was not significantly changed. 2. Fixing the lining and the upper was used as a method to prevent the lining of men's coat from being pushed out or the hem of the clothes from being swollen. The method was generally used for double-layered, cotton and cotton-quilted coat for men. The double back-stitching was usually used for double-layered and cotton coat for men and the broad-stitching for Cotton-quilted ones. 3. Among men's coat, those whose siding was partially opened were less spare in the lower end than those whose siding was wholly opened. For this reason, the former clothes were more likely to have the tip of the siding easily torn. To solve this problem, overhand knotting 1, overhand knotting 2 and lotus-flower knotting strings were used for men's coat whose siding was partially opened. Among the three types, lotus-flower knotting was most elaborate in form. For men's coat, overhand knotting became gradually replaced by lotus-flower knotting as the times moved from the late 15th to the late 16th century.

• 한국물환경학회지
• /
• 제22권6호
• /
• pp.991-995
• /
• 2006

The layered double hydroxide with the insertion of chloride ions (LDH-Cl), which was synthesized by the co-precipitation method, was applied to investigate the fundamental aspects of the absorptive agent for phosphate removal from wastewater. The adsorption capacity was best described by the Langmuir-FreundIich isotherm, and the estimated isotherm parameters indicate that the LDH-CI capacity for the phosphate removal is much higher than that observed using a natural adsorbent material such iron oxide tailing. The kinetic experiment also showed that the LDH-Cl adsorption reaction rapidly at the adsorptive rate of 0.55 mg-P/g-LDH/min, implying that this adsorbent can be of use in the full-scale applications. The pH had a minimal effect on the LDH adsorption capacity in the range of 5 to 11, although the capacity dropped at the low pHs because of the change in LDH surface properties. Furthermore, other anions such as $Cl^-$ and $NO_3{^-}$ commonly found in the wastewater streams insignificantly affected the phosphate removal efficiencies, while $HCO_3{^-}$ ions had a negative effect on the LDH adsorption capacity due to its high selectivity. The phosphate removal experiment using the actual secondary effluent from a wastewater treatment plant showed the similar decrease in adsorption capacity, indicating that the bicarbonate ions in the wastewater were competing with phosphate for the adsorptive site in the surface of the LDH-Cl. Overall, the synthetic adsorbent material, LDH-Cl, can be a feasible alternative over other conventional chemical agents, since the LDH-Cl exhibits the high phosphate removal capacity with the low sensitivity to other environmental conditions.