• 제목/요약/키워드: Double sampling

검색결과 213건 처리시간 0.023초

심장박동 조절장치를 위한 1V 아날로그 CMOS 전단 처리기 (A 1V Analog CMOS Front-End for Cardiac Pacemaker Applications)

  • 채영철;이정환;이인희;한건희
    • 대한전자공학회논문지SD
    • /
    • 제46권1호
    • /
    • pp.45-51
    • /
    • 2009
  • 심장박동 조절장치를 위한 저전압 저전력 전단 처리기를 제안한다. 제안된 회로는 80 Hz에서 120 Hz의 대역폭을 가지는 4차의 스위치드 커패시터 필터와 0 dB에서 24 dB까지 0.094 dB 간격으로 전압이득의 조절이 가능한 전압증폭기를 구현하였다. 낮은 전압에서 동작하고, 전력소모를 극소화하기 위해서 인버터 기반의 스위치드 커패시터 회로를 사용하였으며, 인버터가 가지는 작은 전압이득을 보상하기 위해서 상호상관 기법을 사용하였다. 제안된 회로는 $0.35-{\mu}m$ CMOS 공정을 이용하여 구현되었으며, 5kHz의 샘플링 주파수에서 80-dB의 SFDR을 가진다. 이때 전력소모는 1 V의 전원전압에서 330 nW에 불과하다.

GENERAL FAMILIES OF CHAIN RATIO TYPE ESTIMATORS OF THE POPULATION MEAN WITH KNOWN COEFFICIENT OF VARIATION OF THE SECOND AUXILIARY VARIABLE IN TWO PHASE SAMPLING

  • Singh Housila P.;Singh Sarjinder;Kim, Jong-Min
    • Journal of the Korean Statistical Society
    • /
    • 제35권4호
    • /
    • pp.377-395
    • /
    • 2006
  • In this paper we have suggested a family of chain estimators of the population mean $\bar{Y}$ of a study variate y using two auxiliary variates in two phase (double) sampling assuming that the coefficient of variation of the second auxiliary variable is known. It is well known that chain estimators are traditionally formulated when the population mean $\bar{X}_1$ of one of the two auxiliary variables, say $x_1$, is not known but the population mean $\bar{X}_2$ of the other auxiliary variate $x_2$ is available and $x_1$ has higher degree of positive correlation with the study variate y than $x_2$ has with y, $x_2$ being closely related to $x_1$. Here the classes are constructed when the population mean $\bar{X}_1\;of\;X_1$ is not known and the coefficient of variation $C_{x2}\;of\;X_2$ is known instead of population mean $\bar{X}_2$. Asymptotic expressions for the bias and mean square error (MSE) of the suggested family have been obtained. An asymptotic optimum estimator (AOE) is also identified with its MSE formula. The optimum sample sizes of the preliminary and final samples have been derived under a linear cost function. An empirical study has been carried out to show the superiority of the constructed estimator over others.

정착시간 최소화 기법을 적용한 고속 CMOS A/D 변환기 설계 (A High-Speed CMOS A/D Converter Using an Acquistition-Time Minimization Technique))

  • 전병열;전영득;이승훈
    • 전자공학회논문지C
    • /
    • 제36C권5호
    • /
    • pp.57-66
    • /
    • 1999
  • 본 논문에서는 50 MHz 수준의 고속 신호 샘플링을 위해 정착시간 최소화 기법을 적용한 12 비트 50 MHz CMOS A/D 변환기(analon-to-digital-converter : ADC) 회로를 제안한다. 제안하는 ADC는 0.35㎛ double-poly five-metal n-well CMOS 공정을 사용하여 설계 및 레이아웃되었으며, 응용되는 시스템의 속도, 해상도 및 면적 등의 사양을 고려하여 다단 파이프라인 구조가 적용되었다. 기존의 파이프라인 구조를 가진 ADC의 경우, 동작속도를 제한하는 결정적인 회로 불럭은 잔류전압 증폭기이나, 제안하는 정착 시간 최소화 기법은 이러한 잔류전압 증폭기의 동작 전류 제어를 통해 정착시간 단축 및 출력신호의 불규칙성을 최소한으로 줄인다. 3 V 전원전압에서 50 MHz 클럭 주파수를 사용하여 모의실험한 결과, 입출력단을 포함한 전체 ADC는 197mW의 전력소모를 나타내었고, 입출력단의 패드를 포함한 전체 칩면적은 3.2mm×3.6mm이다.

  • PDF

입력 범위를 개선한 FDPA 방식의 3차 시그마-델타 변조기 (3rd SDM with FDPA Technique to Improve the Input Range)

  • 권익준;김재붕;조성익
    • 전기전자학회논문지
    • /
    • 제18권2호
    • /
    • pp.192-197
    • /
    • 2014
  • 본 논문은 개선된 입력 범위를 갖는 FDPA(Feedback Delay Pass Addition) 방식의 3차 SDM(Sigma-Delta Modulator) 구조를 제안한다. 기존의 구조는 2차 SDM 구조에서 디지털 딜레이 패스만을 추가하여 3차 전달함수를 구현하였지만, 첫 번째 적분기로 피드백 하는 패스가 많아짐에 따라 입력 범위가 매우 작은 단점이 있다. 그러나 제안된 구조는 첫 번째 적분기로 피드백 하는 디지털 패스를 2차 적분기로 피드백 하여 입력 범위를 9dB 개선할 수 있었다 이를 이중 샘플링 기법을 통해 연산 증폭기 한 개 만으로 3차 SC SDM을 구현하였다. 공급전압 1.8V, 신호대역폭 20KHz, 오디오 대역 샘플링 주파수 2.8224MHz 조건에서 $0.18{\mu}m$ CMOS 공정을 이용하여 제안한 SDM을 시뮬레이션한 결과, SNR(Signal to Noise Ratio)은 83.8dB, 전력소비는 $700{\mu}W$, Dynamic Range는 82.8dB이다.

Estimation of Input Material Accounting Uncertainty With Double-Stage Homogenization in Pyroprocessing

  • Lee, Chaehun;Kim, Bong Young;Won, Byung-Hee;Seo, Hee;Park, Se-Hwan
    • 방사성폐기물학회지
    • /
    • 제20권1호
    • /
    • pp.23-32
    • /
    • 2022
  • Pyroprocessing is a promising technology for managing spent nuclear fuel. The nuclear material accounting of feed material is a challenging issue in safeguarding pyroprocessing facilities. The input material in pyroprocessing is in a solid-state, unlike the solution state in an input accountability tank used in conventional wet-type reprocessing. To reduce the uncertainty of the input material accounting, a double-stage homogenization process is proposed in considering the process throughput, remote controllability, and remote maintenance of an engineering-scale pyroprocessing facility. This study tests two types of mixing equipment in the proposed double-stage homogenization process using surrogate materials. The expected heterogeneity and accounting uncertainty of Pu are calculated based on the surrogate test results. The heterogeneity of Pu was 0.584% obtained from Pressurized Water Reactor (PWR) spent fuel of 59 WGd/tU when the relative standard deviation of the mass ratio, tested from the surrogate powder, is 1%. The uncertainty of the Pu accounting can be lower than 1% when the uncertainty of the spent fuel mass charged into the first mixers is 2%, and the uncertainty of the first sampling mass is 5%.

삼림자원조사법(森林資源調査法)의 연구(硏究) (A study on the Forest inventory work)

  • 김갑덕
    • 한국산림과학회지
    • /
    • 제5권1호
    • /
    • pp.10-15
    • /
    • 1966
  • 이 연구(硏究)는 Forest survey시(時) 지상조사(地上調査)와 항공사진(航空寫眞)을 이용(利用)한 조사(調査)와의 비교(比較) 연구(硏究)인데 tone contrast가 여의(如意)치 못한 aerial photo를 인수(人手)했기 때문에 연구(硏究)에 많은 지장(支障)을 가져와 처음의 계획(計劃)대로 추진(推進)하지 못하였다. 조사방법(調査方法)은 aerial photo를 이용(利用)했을 때 가장 편리(便利)하였고 이때 적용(適用)한 방법(方法)은 지상(地上)과 병용(併用)시킨 조사방법(調査方法)이다. 임상도작성(林相圖作成)에 Radial line plotter를 사용(使用)했는데 그 결과(結果)는 대단(大端)히 좋았다. 즉(即) compass surveying에 의(依)하여 현지(現地) check한 결과(結果)와는 none significant였다. 앞으로는 double sampling에 대(對)한 연구(硏究)가 더 필요(必要)할 것으로 생각된다. 따라서 이에 대(對)한 연구(硏究)를 계획(計劃)하여 추진(推進)할 생각이다.

  • PDF

A Fully-Differential Correlated Doubling Sampling Readout Circuit for Mutual-capacitance Touch Screens

  • Kwon, Kihyun;Kim, Sung-Woo;Bien, Franklin;Kim, Jae Joon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제15권3호
    • /
    • pp.349-355
    • /
    • 2015
  • A fully-differential touch-screen sensing architecture is presented to improve noise immunity and also support most multi-touch events minimizing the number of amplifiers and their silicon area. A correlated double sampling function is incorporated to reduce DC offset and low-frequency noises, and a stabilizer circuit is also embedded to minimize inherent transient fluctuations. A prototype of the proposed readout circuit was fabricated in a $0.18{\mu}m$ CMOS process and its differential operation in response to various touch events was experimentally verified. With a 3.3 V supply, the current dissipation was 3.4 mA at normal operation and $140{\mu}A$ in standby mode.

DISTRIBUTiON-FREE TWO-SAMPLE TEST ON RANKED-SET SAMPLES

  • DONG HEE KIM;YOUNG CHEOL KIM;MYUNG HWA CHO
    • Communications for Statistical Applications and Methods
    • /
    • 제5권1호
    • /
    • pp.133-144
    • /
    • 1998
  • In this paper, we propose the two-sample test statistic using Wilcoxon signed rank test on ranked-set sampling(RSS) and obtain the asymptotic relative efficiencies(ARE) of the proposed test statistic with respect to Mann-Whitney-Wilcoxon statistic on simple random sampling(SRS), the Mann-Whitney-Wilcoxon statistic on RSS, sign statistic on RSS and Wilcoxon signed rank test on SRS. From the simulation works, we compare the powers of the proposed test statistic, Mann-Whitney-Wilcoxon statistic on RSS, the usual two-sample t statistic, sign statistic on RSS, where the underlying distributions are uniform, normal, double exponential, logistic and Cauchy distributions.

  • PDF

A Random Sampling Method in Estimating the Mean Areal Precipitation Using Kriging

  • Lee, Sang-Il
    • Korean Journal of Hydrosciences
    • /
    • 제5권
    • /
    • pp.45-55
    • /
    • 1994
  • A new method to estimate the mean areal precipitation using kriging is developed. Urlike the conventional approach, points for double and quadruple numerical integrations in the kriging equation are selected randomly, given the boundary of area of interest. This feature eliminates the conventional approach's necessity of dividing the area into subareas and calculating the center of each subarea, which in turn makes the developed method more powerful in the case of complex boundaries. The algorithm to select random points within an arbitrary boundary, based on the theory of complex variables, is described. The results of Monte Carlo simulation showed that the error associated with estimation using randomly selected points is inversely proportional to the square root of the number of sampling points.

  • PDF

이중추출법에서 일반화 ratio-cum-product 방법을 이용한 이상점 가중치 보정법 (An outlier weight adjustment using generalized ratio-cum-product method for two phase sampling)

  • 오정택;신기일
    • 응용통계연구
    • /
    • 제29권7호
    • /
    • pp.1185-1199
    • /
    • 2016
  • 이중추출법은 모집단 정보가 충분하지 않아 층화 추출법을 사용할 때 정확한 층화 정보가 없는 경우에 흔히 사용하는 표본추출법이다. 특히 최근에는 이중추출법을 위해 1차 조사에서 얻어진 보조 정보를 이용하여 추정의 정확성을 향상시키는 방법들이 제안되었다. 본 연구에서는 최근 제안된 일반화 ratio-cum-product 추정량에서 사용하는 가중치를 이상점 처리를 위한 가중치 보정에 맞도록 보정하여 추정의 정밀성을 향상시키는 방법을 제안하였다. 모의실험을 통하여 본 연구에서 제안한 방법과 기존의 이상점 가중치 보정법의 성능을 비교하였으며 사례 분석을 통하여 제안된 방법의 우수성을 확인하였다.