• The Journal of Fisheries Business Administration
• /
• v.35 no.2
• /
• pp.31-51
• /
• 2004

The reduction of fishing grounds due to the establishment of EEZ system among China, Japan and Korea together with the depletion of fish resources by pollution of waters and successive reclamation projects along the east and the south coastal lines has made many problems in coastal communities including the decrease of population, the deepening aging phenomenon in the fishery society and the fall of relative income level compared with those of rural and urban residents. Especially, the income level of a fishing household is 90%. of a rural resident and 70% of a urban resident. The income of a fishing household consists of 55% of fishing income, 20% of a agricultural source, 20% of income from non-fishing areas, and 10% of transferred income. Compared with that of a Japanese fishing household which has more diverse income sources such as 62% of income coming from non-fishing areas through being hired in manufacturing firms, etc., that of Korean ones is highly dependent upon fishery and agriculture, so that the diversification of income sources is urgently needed, especially in non-fishing areas. This paper shows that as a model to upgrade fisherman's income level, firstly, it is necessary to enhance the value-added of fishing products through processing and new innovation of distribution process and, secondly, to promote tourism in fishing villages. To ascertain this model, a questionnaire survey to fishermen was carried out and showed that they expressed a strong support for the increase of income by the value-added process through processing and innovative distribution system and the active introduction of tourism in fishing villages. A case study on Gosan cooperative in Jeju was also introduced to identify the rationale of the suggested model and this study proved the validity of the model again. Conclusively speaking, to level up the fisherman's income requires the value- added activities through the introduction of product processing and new distribution system together with the introduction of marine tourism in fishing villages.

• Journal of Korea Water Resources Association
• /
• v.46 no.10
• /
• pp.969-976
• /
• 2013

Leakage in water distribution system causes social and economic losses by direct water loss into the ground, and additional energy demand for water supply. This research suggests a leak detection model of using adaptive Kalman filtering on real-time data of pipe flow. The proposed model takes into account hourly and daily variations of water demand. In addition, the model's prediction accuracy is improved by automatically calibrating the covariance of noise through innovation sequence. The adaptive Kalman filtering shows more accurate result than the existing Kalman method for virtual sine flow data. Then, the model is applied to data from two real district metered area in JE city. It is expected that the proposed model can be an effective tool for operating water supply system through detecting burst leakage and abnormal water usage.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.937-953
• /
• 2013

The theoretical discussion of generation process and development directions of economic fluctuations are actively discussed. This study describes the economic changes applied to empirical research on economic volatility in Korea under the economic theory of network theory [Acemoglu, et al. 2012, 2010]. For the three years in 2000, 2005, and 2010, the network analysis were applied to industry input-output tables. The research results show that the network economic structures in Korea is shifted from a high connectivity among sectors to a lower connectivity. Also, the impact of key industries and the mutual connectivity of input and out among industrial sectors are weaken. Implications for industry and technology policy are derived form the study results.

• The Journal of Information Technology
• /
• v.6 no.3
• /
• pp.151-168
• /
• 2003

The present paper attempts to describe on and off line integrated marketing and develop an empirical model for distribution industry. The focus is given on the small and medium size retail and service area. With both empirical case studies and literature review, we aim to develop empirical cases and propose a desirable marketing strategy for specific firms : BAROKOSA is pursues cooperation in wholesale business on the internet. For the purpose of the cooperative and integrated marketing of on and off line business, first of all, the firms should establish a clear target and share vision and mission for their directions. We suggest the following guidelines: (i) customer-based decision making, (ii) thoroughly cooperative competition, (iii) confidence in their work and business, (iv) courage to live up to action and (v) innovation to lead change.

• Journal of Korea Technology Innovation Society
• /
• v.10 no.2
• /
• pp.361-382
• /
• 2007

As the Korea's economy grows bigger and its industrial structure advances, demands of high quality product become increasing. And the technology becomes to be more important factor than labor power and capital. And, the development of technology plays the key role in promoting the competitiveness of a nation. Measurement means 'Measuring with instrument', dissemination of measurement standards related with dissemination and distribution of measuring instrument. Measurement technology has been known to be the main factor of economic growth and technological development. National measurement standards is one of these factors of measurement technology. Therefore, in order to enhance dissemination of measurement standards to industry, we have to define its economic impact. We analysed the economic impact of measurement standards in terms of its contribution to the product induction of industry and management results using I-O Table with the quantitative data. The results from this study show that the increasement of measurement standards dissemination is in complementary relation with the productivity of various industries, assembly manufacturing, in particularly.

• Communications for Statistical Applications and Methods
• /
• v.16 no.5
• /
• pp.803-812
• /
• 2009

The application of extreme value theory to financial data is a fairly recent innovation. The classical annual maximum method is to fit the generalized extreme value distribution to the annual maxima of a data series. An alterative modern method, the so-called threshold method, is to fit the generalized Pareto distribution to the excesses over a high threshold from the data series. A more substantial variant is to take the point-process viewpoint of high-level exceedances. That is, the exceedance times and excess values of a high threshold are viewed as a two-dimensional point process whose limiting form is a non-homogeneous Poisson process. In this paper, we apply the two-dimensional non-homogeneous Poisson process model to daily losses, daily negative log-returns, in the data series of KBW/USD exchange rate, collected from January 4th, 1982 until December 31 st, 2008. The main question is how to estimate extreme quantiles of losses such as the 10-year or 50-year return level.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.10
• /
• pp.4642-4660
• /
• 2016

One major concern of applying Multipath TCP (MPTCP) to data delivery in heterogeneous wireless networks is that the utilization of asymmetric paths with diverse networking-related parameters may cause severe packet reordering and receive buffer blocking (RB²LOC). Although many efforts are devoting to addressing MPTCP's packet reordering problems, their sender-controlled solutions do not consider balancing overhead between an MPTCP sender and receiver, and their fully MPTCP mode cannot make MPTCP achieve a desired performance. This paper proposes a novel receiver-centric buffer blocking-aware data scheduling strategy for MPTCP (dubbed MPTCP-rec) necessitating the following aims: (1) alleviating MPTCP's packet reordering and RB²LOC problems, (2) improving the MPTCP performance, and (3) balancing load between the MPTCP sender and receiver. Simulation results show that the proposed MPTCP-rec solution outperforms the existing MPTCP solutions in terms of data delivery performance in heterogeneous wireless networks.

• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.432-439
• /
• 2004

Korean certification regulation for particulate filtering respirators requires inward leakage (IL) test as European Standards (EN) and the standard levels of regulation are the same as those of EN. This study was conducted to evaluate particulate filtering respirators being commercially used in the market by using IL and assess the characteristics of IL. The study began with discussing the concept of IL, comparison of IL with fit test, and IL measurement method. Three brands of half masks and 10 brands of filtering facepieces (two top class, four 1st class and four 2nd class), total 13 brands respirators, and 10 test panels (subjects) who were classified in 9 facial grids in accordance with face length and lip length, were selected for IL test. IL tests were conducted in the laboratory of 3M Innovation Center which was established by EN standard. As expected ILs of half masks were lower than those of filtering facepiece mask. ILs of half masks and some filtering facepieces were significantly different in manufacturers. ILs of 1st class filtering facepieces were found to be much more than those of 2nd class and thus the result would cause wearers to get confused to select a mask. Four of six brands being no compliance with standards were thought that they should be tested again for certification because of a lot of differences from standards. There were no significant differences among ILs of five exercises. In 6 out of 13 brands lognormal distribution of ILs may be a better fit distribution and in 7 brands both lognormal and normal distributions were rejected. The result indicates that geometric mean may be better than arithmetic mean to establish standard.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.2
• /
• pp.47-55
• /
• 2018

Purpose - To meet the needs of various customers in an uncertain market environment, many companies use product modularization strategies. Modularization of a product means that one product consists of several components and that the type of product can be changed according to the combination of components. The greatest feature of modularity is that changes in one component do not significantly affect the physical changes in the other component to which they are connected. Modularization of products is recognized as a very important strategy to reflect increasingly complicated customer requirements to products and respond to the needs of various markets. Many studies have been made in connection with the concept of mass customer satisfaction. There are many prior studies that modularization of such products positively affects the operational performance (manufacturing cost, fast delivery, etc.) and innovation of the product. However, excessive modularization has been found to have a negative effect on this performance. However, there are very few studies on the nonlinear relationship between product modularization and customer satisfaction. Supplementing these academically insufficient parts is very necessary when considering the current market environment. Research design, data, and methodology - In order to make up for the shortcomings of academic research in Korea, this study collects data through questionnaires in electronic, auto, and defense industry. This is because these industries are using modularity of products. based on lots of previous studies and information overload theory, we made two hypothesis and verify with empirical analysis. All 108 data were used. We used the R program and SPSS program for statistical verification. Results - As a result of the study, modularization of products showed positive relationship with customer satisfaction to a certain level. However, it has been found that when the modularization is over and beyond a certain level, there is a negative relationship with customer satisfaction. Conclusions - Excessive modularization of products can have a negative impact on customer satisfaction. This result can be understood as a result of human limited rationality due to information overload. Therefore, it is important for companies to apply appropriate modularity to product design.

• The Journal of Information Technology
• /
• v.2 no.2
• /
• pp.1-12
• /
• 1999

The purpose of this study is to classify the determinants of channel performance and to reveal the contribution of classified performance factor on the total distribution performance of individual channel members. The empirical results of this study confirm that channel member performance is too rich and complex to be accurately reflected in a single item or even limited domain performance measures. The respondents in our sample monitored a lot of different facets of performance, indicating their belief in the multidimensional nature of performance. Our finding that outcome-based monitoring was particularly pervasive was not surprising given that managerial attention to end results is expected since those results are necessary for continued survival of the dealership. However, the dealership owner were not content to rely exclusively on these outcome performance indicators. They also gathered information on the efforts and activities that lead to those outcomes as well as other facets of information such as customer satisfaction and selling skills of salesperson. Limiting the definition and measurement of performance to outcomes only, or to a single item measure would have failed to capture important facets of performance, and could distort he relationship between the managerial variables and performance.