• Transactions on Electrical and Electronic Materials
• /
• v.9 no.4
• /
• pp.163-168
• /
• 2008

Photonic crystal structures have been received considerable attention due to their high optical sensitivity. One of the techniques to construct their structure is the dip-pen lithography (DPN) process, which requires a nano-scale resolution and high reliability. In this paper, we propose a two dimensional photonic crystal array to improve the sensitivity of optical biosensor and DPN process to realize it. As a result of DPN patterning test, we have observed that the diffusion coefficient of the mercaptohexadecanoic acid (MHA) molecule ink in octanol is much larger than that in acetonitrile. In addition, we have designed and fabricated optical waveguides based on the mach-zehnder interferometer (MZI) for application to biosensors. The waveguides were optimized at a wavelength of 1550 nm and fabricated according to the design rule of 0.45 delta%, which is the difference of refractive index between the core and clad. The MZI optical waveguides were measured of the optical characteristics for the application of biosensor.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.25 no.1
• /
• pp.14-20
• /
• 2016

This paper describes a green stripping process to effectively strip the remaining DFR layer on a non-alkali-based ITO glass surface after an etching process. A stripper, water-soluble amine compound, is used to investigate the characteristics of stripping ability and to suggest a valid method for the green process. Increasing the composition (5-30% concentration) of the ethanol amine-based stripper was found to greatly reduce the stripping time applied in the dipping method. The composition (30%) achieved an excellent stripping effect and free-residue impurities. Additionally, it was possible to obtain the effect of stripping in a way to sustain the release before generating DFR sludge from the ITO glass surface by using dipping condition (stripping time) in the composition. An Additional stripping process (buffering) out of dipping can realize productivity improvement and cost reduction because of the higher proportion of re-use of the stripping solution used in the DFR removal step.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.41 no.2
• /
• pp.107-112
• /
• 2005

In order to investigate influence of moon light to the fishing of Pacific saury stick-held dip net fishery in the northwestern Pacific Ocean, casting number, catch and CPUE were analyzed between the full moon and the new moon phases. Based on analyses of data taken from 8 vessels during 1992~2002, casting numbers at the full moon phase and the new moon phase were 110.3 and 121.0 times, respectively, and the first was lower than the latter by 8.8%. Catches of the full moon phase were higher than the new moon phase by 12.5% and CPUE expressed in ton/day and ton/haul were also higher by 31.5%, 26.1% respectively.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.43 no.4
• /
• pp.31-39
• /
• 2011

One of the main drawbacks of wood fibers based composite materials are their tendency to swell due to moisture uptake in wet and moist environments. The main contribution to the hygroexpansion usually comes from the hydrophilic wood fibers. Recent trend toward the high speed printing, copying, and precision converting precesses demands a high level of dimensional stability under various environmental conditions. The purpose of this study was to investigate the dimensional stability of softwood bleached kraft pulp handsheets depending on wet pressing conditions. By increasing the number of wet pressing, dimensional stability was decreased because of increased fiber-to-fiber bonding. Hygroexpansion of handsheets had a linear relationship with the relative bonded area and equilibrium moisture contents. Dip elongation was decreased when the number of wet pressing was increased because of increased fiber-to-fiber bonding to resist low load in water.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.12
• /
• pp.1078-1084
• /
• 2006

Impurity contamination induced by $CF_4\;and\;HBr/Cl_2/O_2$ plasma etching on Si surface was examined by using surface spectroscopes. XPS(x-ray photoelectron spectroscopy) surface analysis showed that F of 0.4 at % exists in the surface layer in the form of Si-F bonding but Br and Cl are below the detection limit $(0.1{\sim}1.0%)$ of the spectroscope. Static-SIMS(secondary ion mass spectrometry) surface analysis showed that the etched Si surface was contaminated with etching gas elements such as H, F, Cl and Br, and they existed to the depth of about $20{\sim}40nm$. The etched Si surface was treated with three different methods that were HF dip, thermal oxidation followed by HF dip and oxygen-plasma oxidation followed by HF dip. They showed an effect in reducing the impurity contamination and the oxygen-plasma oxidation followed by HF dipping method appears to be a little bit more effective.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.993-997
• /
• 2004

파장다중분할 방식의 광통신소자는 단일파장 뿐만 아니라 이웃하는 여러 파장대에서도 동작 할 수 있는 유연성을 갖는 소자가 요구된다. 이를 해결하는 하나의 방법이 파장제어(다중채널)광자결정(Photonic crystal)소자이다. 본 연구에서는 결함층으로 광자결정체 배열구조를 가지는 다중주기 일차원광자결정을 이용하므로 투과광 파장제어가 가능한 가변형 다중채널 투과필터를 얻을 수 있는 이론적 모델과 그에 따라 제작된 $Si/SI_)2$의 광자결정체를 제작하고 그 특성을 고찰하였다. 반사밴드 갭내에 생성된 다중투과-dip의 파장 위치는 이론값과 정착하게 일치하였다. 특히, 결함층 수(N)에 따라 광자 에너지갭내에 2N개의 투과-dip 모드를 생성할 수 있으며, 이들은 주파수범위에 대해 대칭 분포됨을 알 수 있다. 여기에 제안하는 다중채널 투과필터는 외부 전원 없이 입사각도를 미세 조절하므로 파장을 tuning할 수 있다.

• Ocean and Polar Research
• /
• v.27 no.1
• /
• pp.45-58
• /
• 2005

Temperature, salinity, dissolved oxygen, COD, dissolved inorganic nitrogen(DIN), dissolved inorganic phosphorus (DIP), and chlorophyll were measured in the surface and bottom waters of Cheonsu Bay in April, August, December 2003, and Hay 2004. DIN showed a large seasonal variation, with higher values in summer and lower in spring. The significant decrease in DIN concentration was observed from April to May, which may imply the occurrence of spring phytoplankton bloom sometime in these periods. In contrast, DIP did not show distinct seasonal variation, with relatively low values compared with other coastal regions. The low DIP concentration in Cheonsu Bay is ascribed to a limited phosphorus input around Cheonsu Bay. The Nf ratios of Cheonsu Bay much higher than the Redfield ratio(16) in all season indicate that phytoplankton growth is limited by phosphorus. Based on low chlorophyll concentrations and eutrophication index, Cheonsu Bay has not been in eutrophic condition during our observation periods. In the artificial lakes located around Cheonsu Bay, however, chlorophyll concentrations were very high, mostly over $10{\mu}g\;l^{-1}$, indicating that they are now in severe eutrophic condition.

• Fashion & Textile Research Journal
• /
• v.10 no.4
• /
• pp.560-565
• /
• 2008

Plantae of the natural material has been broadly used on cloth dyeing by it's specific properties such as eco-friendly and innoxious. However dyeing with natural material on synthetic fiber is nearly impossible due to poor affinity between natural material and synthetic fiber. The method which is binding with micro-capsulized natural material to cloth, used in this study, has low change on quality by external influence. Also this method has high ability in spray effect by broken capsule which comes to pressure and friction when the treated cloth was dressed. And this method is applicable widely from natural fiber to synthetic fiber. The purpose of this study is to develop the multi-functional synthetic material with micro-capsulized Ginseng on PET. Moreover, it was driven by comparison of colormetric properties and fastness between regular dip-dyeing method and binding with micro-capsulized material method. Dyeability showed a little bit low exhaustion but the PET treated by micro-capsule was more or less better than the dip dyed PET. Through the SEM(Scanning Electron Microscope) of PET treated by micro-capsule, it has good residence of capsules even after 5 or 10 times washing. Wash and light fastness were revealed some different grades by each condition but showed high level, in most and the micro-capsulized PET was more improver than regular dip dyed PET.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.3
• /
• pp.129-135
• /
• 1983

During engineering projects, land use and geologic investigations, topographic information by means of Photointerpretation and Photographic Survey often plays an important role. As some recent methods of Dip and Strike determination were used without considering the characteristics of the geometrical conditions of photography, it is necessary to present an accurate and rapid formula. In this paper, Dip and Strike determination using photogrammetric method was theoretically approached with geometrical and mathematical models using trigonometric formula and plane equation, respectively.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.8 no.2
• /
• pp.39-44
• /
• 2002

In order to study the change of pollution loads flowing into Mokpo harbour after the operation of Mokpo Municipal Sewage Treatment Plant (MMSTP) and to evaluate the contribution of MMSTP operation to the improvement of marine water quality of Mokpo harbour, the pollution loads flowing into Mokpo harbour from land in dry weather were surveyed and estimated on the bases of the seasonal flow rates and the seasonal water qualities of streams and effluents located around Mokpo harbour from summer, 1997 to spring, 1998 before the operation of MMSTP, and the pollution loads of the inflow and the effluent of MMSTP were also surveyed and estimated from winter, 1998 to spring, 1999 after the operation of MMSTP. The treatment rates of MMSTP were shown to be about 49% in COD, 76% in TSS, 79% in VSS, 3% in T-N, 7% in DIP, 29% in T-P and -32% in DIN. The change rates of pollution loads flowing into the inner harbour of Mokpo due to the operation of MMSTP were shown to be about 56% In COD, 78% in TSS, 84% in VSS, 45% in DIN, 22% in T-N, 34% in T-P and -14% in DIP. The contribution rates of MMSTP operation to the reduction of total pollution loads flowing into the entire Mokpo harbour were found to be about 3% in COD, 3% in 755,5% in VSS,1% in DIP, 3% in T-P and -1% in DIN.