• Journal of the Institute of Convergence Signal Processing
• /
• v.18 no.2
• /
• pp.76-83
• /
• 2017

In this study, the original medical image, DICOM file, was converted into TIFF, BITMAP, GIF, JPEG image file, and then the conversion loss ratio according to the image compression and conversion process was quantitatively evaluated using Origin pro and ICY image analysis program. As the evaluation method, 50% MTF, structural similarity index, MSE, RMSE, maximum signal - to - noise ratio and so on were evaluated. The TIFF image file showed the same result as DICOM image in all experimental groups, Image file format. In this study, we propose a new method for evaluating the quality of digital images by applying original evaluation program such as Origin pro or ICY medical image analysis program. Is expected to be used as research data in the field of medical image processing, and TIFF image file showing the same result as DICOM image in the basic research field using digital medical image and evaluation program that does not support DICOM file Therefore, it is believed that it will help to secure reliability in digital medical image processing research using image file.

• Journal of Advanced Navigation Technology
• /
• v.1 no.1
• /
• pp.23-34
• /
• 1997

A multi-channel digital GPS receiver has been developed including a RF-to-IF engine (engine 1), a digital signal processing engine (engine 2) with a microprocessor interfacing, and a navigation software. A high speed SiGe heterojunction bipolar transistor (HBT) as a active device has been mounted on chip-on-board (COB) type hybrid ICs such as LNA, mixer, and VCO in RF front-end of the engine 1 board. A 6-channel digital correlator together with a real-time clock and a microprocessor interface has been realized using an Altera Flex 10K FPGA as well as ASIC technology. Navigation software controlling the correlator for GPS signal tracking, retrieval and storing a message retrieval, and position calculation has been implemented. The GPS receiver was tested using a single channel STR2770 simulator. Successful navigation message retrieval and position determination was confirmed.

• Journal of IKEEE
• /
• v.16 no.1
• /
• pp.34-44
• /
• 2012

This paper proposes a practical compensation method by using digital signal processing over the creep error which is representative in strain gauge loadcell. The signal compensation method carry out the simulation by deciding compensation constant (time constant) and coefficient measuring the loadcell output response. Then, compensation constant and coefficient are stored on the microprocessor. By using calculated on microprocessor creep error compensation values, weighting value is showed as a digital signal by reducing error values measured through output signals of loadcell. In addition, we apply error compensation method in order to have a dedicated software for loadcell electronic scale. This technique is useful because it has great influence on error rate reduction that has been produced by conventional electronic scales (0.03%). As a result our technique gives better accuracy (0.01%~0.003%) as what is given by digital electronic scale, while it has less complex operation processing.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2641-2644
• /
• 2003

Recently, TRAO Taeduk Radio Astronomy Observatory is developing wide-band digital spectrometer for radio astronomy, which will be used as back-end signal processing unit of Dual channel SIS receiver. So in this paper, we performed development of high speed digitizing sampler for the wide-band digital autocorrelator, which can perform sampling and quantization on pseudo-random gaussian noise with the maximum conversion speed of 1.5 Gsps..

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.181.4-181
• /
• 2001

In this study, we have developed the digital hardware system which performs signal processing necessary for the filtering to eliminate noises by inputting pulse wave signals from the sensor group. With a view to obtain clinically effective information, we analyzed structural elements of pulse waveform and, thus, conducted a systematic classification. What is more, this study has conducted researches in the web-based diagnosis data management system of pulse waveform as well as the method of transmitting the data of pulse waveform. In order to set the standard for the documents of the pulse ...

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.149-152
• /
• 2002

The performance of a 1-bit DAC depends on that of the analog circuits. The mixed SC-CT (switched capacitor-continuous time) architecture is an effective design methodology for the analog circuits. This paper Proposes a new buffer scheme for the 1-bit digital-to-analog subconverter and a new SF-DSC(smoothing filter and differential-to-sig le converter) which performs both the smoothing filter and the differential-to-single convertor simultaneously.

• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.157-160
• /
• 2002

This paper proposed a guideline for selecting the arithmetic circuit architecture. The guideline incorpo-rates the new concept of PDSP (power-delay-size product) and the weighting method. HSPICE simulations havc been performed to several full adders in order to prove the validity of the proposed guideline. We applied this guideline to select an optimized FA (full adder) architecture and successfully implemented the DAC's digital blocks.

• ETRI Journal
• /
• v.10 no.2
• /
• pp.32-39
• /
• 1988

In this paper, we describe an effective trunk loop signal processing method and anlayze execution time of the program in the DTCP (Digital Trunk Circuit Processor) in the TDX-1A digital switching stytem. And we also predict a maximum trunk capacity in the DTCP with respect to scanning period based on the call attempt characteristics which has the Poisson distribution.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.675-676
• /
• 2008

The computer based three phase power analysing system has been developed as a traveling standard for onsite power calibration. The system is utilized with digital-to-analog converts which were synchronized each other. Using digital signal processing technique the software has been developed to calculate power parameters. The calibration system is fully traceable to national standard system and, accuracy allows the calibration of industrial power measurement systems.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.43 no.7
• /
• pp.1112-1120
• /
• 1994

This paper presents a servo control scheme for the surface-mounted permanent-magnet synchronous motor(SPMSM) which essentially uses vector control algorithm. The control system is composed of the PI controller for speed control and the current controller using space voltage vector PWM technique. The high-speed calculation and processing for vector control is carried out by TMS320C31 digital signal processor and IGBT module. The proposed scheme is verified through digital simulations and experiments for 2.2kW SPMSM and shows good dynamic performance.