• Journal of IKEEE
• /
• v.21 no.4
• /
• pp.416-419
• /
• 2017

In this paper, we propose a new digital delay-locked loop (DLL) for high-speed DDR3/DDR4 SDRAMs. The proposed digital DLL adopts a fine delay line using phase interpolation to eliminate the jitter increase problem due to the boundary switching problem. In addition, the proposed digital DLL utilizes a new gradual search algorithm to eliminate the harmonic lock problem. The proposed digital DLL is designed with a 1.1 V, 38-nm CMOS DRAM process and has a frequency operating range of 0.25-2.0 GHz. It has a peak-to-peak jitter of 1.1 ps at 2.0 GHz and has a power consumption of about 13 mW.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.520-527
• /
• 2016

A new dual-loop digital delay-locked loop (DLL) using a hybrid (binary + sequential) search algorithm is presented to achieve both wide-range operation and high delay resolution. A new phase-interpolation range selector (PIRS) and a variable successive approximation register (VSAR) algorithm are adopted to resolve the boundary switching and harmonic locking problems of conventional digital DLLs. The proposed digital DLL, implemented in a $0.18-{\mu}m$ CMOS process, occupies an active area of $0.19mm^2$ and operates over a wide frequency range of 0.15-1.5 GHz. The DLL dissipates a power of 11.3 mW from a 1.8 V supply at 1 GHz. The measured peak-to-peak output clock jitter is 24 ps (effective pk-pk jitter = 16.5 ps) with an input clock jitter of 7.5 ps at 1.5 GHz. The delay resolution is only 2.2 ps.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.963-964
• /
• 2006

By combining a digital DLL and an analog DLL in 2-stage, an improved DLL is implemented in this paper. The proposed DLL is composed of a RDLL (Register Controlled DLL) and a conventional analog DLL. The phase comparator used in the DLL is built with sense-amp based D flip-flops for high speed operation. The proposed DLL circuits have been designed, simulated in 0.18um, 1.8V TSMC CMOS library. The implemented DLL have demonstrated the fast lock-on time of 1us and low jitter of 72ps.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.3
• /
• pp.411-424
• /
• 2017

An all-digital delay-locked loop (DLL) for a mobile memory interface, which runs at 0.11-2.5 GHz with a phase-shift capability of $180^{\circ}$, has two internal DLLs: a global DLL which uses a time-to-digital converter to assist fast locking, and shuts down after locking to save power; and a local DLL which uses a phase detector with an adaptive phase sampling window (WPD) to reduce jitter accumulation. The WPD in the local DLL adjusts the width of its sampling window adaptively to control the loop bandwidth, thus reducing jitter induced by UP/DN dithering, input clock jitter, and supply/ground noise. Implemented in a 65 nm CMOS process, the DLL operates over 0.11-2.5 GHz. It locks within 6 clock cycles at 0.11 GHz, and within 17 clock cycles at 2.5 GHz. At 2.5 GHz, the integrated jitter is $954fs_{rms}$, and the long-term jitter is $2.33ps_{rms}/23.10ps_{pp}$. The ratio of the RMS jitter at the output to that at the input is about 1.17 at 2.5 GHz, when the sampling window of the WPD is being adjusted adaptively. The DLL consumes 1.77 mW/GHz and occupies $0.075mm^2$.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.87-90
• /
• 2000

This paper describes a register-controlled symmetrical delay-locked-loop (DLL) using hybrid delay line for use in a high frequency double-data-rate DRAM. The proposed DLL uses a hybrid delay line which can cover two-step delays(coarse/fine delay) by one delay element. The DLL dissipate less power than a conventional dual-loop DLL which use a coarse and a fine delay element and control separately. Additionally, this DLL not only achieves small phase resolution compared to the conventional digital DLL's when it is locked but it also has a great simple delay line compared to a complex dual-loop DLL.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.8
• /
• pp.2043-2054
• /
• 1996

In this paper, Digital Delay Locked Loop(DDLL) is designed, implemented and analysed by experiment whose results show that it is possible to track the received signal by this scheme. Designed digital DLL has an advantage that it is not needed to maintain gain balance between early and late channels, which has been problem with an analog DLL. Also DDLL has more improved noise performance compared to analog DLL due to noise level limitation and noise cancellation characteristics. For various loop parameters, their effects on loop performance are analysed and simulated. Proposed DDLL is the first attempt as a digital approach in code tracking loop and it is expected to be a good reference for spread spectrum communication research.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.387-394
• /
• 2016

This paper presents a fully digital delay locked loop (DLL) that can acquire lock in four clock cycles with a resolution of a 1/4 NAND-delay. The proposed DLL with a multi-dither-free phase detector acquires the initial lock in four clock cycles with 1/2 NAND-delay. Then, it utilizes a multi-dither-free phase detector, a region accumulator, and phase blenders, to improve the resolution to a 1/4 NAND-delay. The region accumulator which continuously steers the control registers and the phase blender, adaptively controls the tracking bandwidth depending on the amount of jitter, and effectively suppresses the dithering jitter. Fabricated in a 65 nm CMOS process, the proposed DLL occupies $0.0432mm^2$, and consumes 3.7 mW from a 1.2-V supply at 2 GHz.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.11
• /
• pp.79-85
• /
• 2004

A digitally-controlled analog-block inevitably undergoes the bang-bang oscillations which may cause a big amplitudes of the glitches if the oscillation occurs at the MSB transition points of a binary counter. The glitch results into the jitter noise for the case of the DLL. In this paper, we devise a new counter code that has the hysteresis in the bit transitions in order to prevent the transitions of the significant counter-bits at the locking state. The maximum clock jitter is simulated to considerably reduce over the voltage-temperature range guaranteed by specifications. The counter is employed to implement the high speed packet-base DRAM and contributes to the maximized valid data-window.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.42 no.2 s.332
• /
• pp.23-30
• /
• 2005

This paper describes a DLL(delay locked loop)-based multi-clock generator having the lower active stand-by power as well as a fast relocking after re-activating the DLL. for low power and high speed VLSI chip. It enables a frequency multiplication using frequency multiplier scheme and produces output clocks with 50:50 duty-ratio regardless of the duty-ratio of system clock. Also, digital control scheme using DAC enables a fast relocking operation after exiting a standby-mode of the clock system which was obtained by storing analog locking information as digital codes in a register block. Also, for a clock multiplication, it has a feed-forward duty correction scheme using multiphase and phase mixing corrects a duty-error of system clock without requiring additional time. In this paper, the proposed DLL-based multi-clock generator can provides a synchronous clock to an external clock for I/O data communications and multiple clocks of slow and high speed operations for various IPs. The proposed DLL-based multi-clock generator was designed by the area of $1796{\mu}m\times654{\mu}m$ using $0.35-{\mu}m$ CMOS process and has $75MHz\~550MHz$ lock-range and maximum multiplication frequency of 800 MHz below 20psec static skew at 2.3v supply voltage.

• Journal of IKEEE
• /
• v.6 no.1 s.10
• /
• pp.21-29
• /
• 2002

This paper describes a high resolution DLL(Delay Locked Loop) using all digital circuits. The proposed architecture is based on the three stage of coarse, fine and ultra fine phase tuning block which has a phase detector, selection block and delay line respectively. The first stage, the ultra fine phase tuning block, is tune to accomplish high resolution using a vernier delay line. The second and third stage, the coarse and fine tuning block, are tuning the phase margin of Unit Delay using the delay line and are similar to each other. It was simulated in 0.35um CMOS technology under 3.3V supply using HSPICE simulator. The simulation result shows the phase resolution can be down to lops with the operating range of 250MHz to 800MHz.