• 한국수소및신에너지학회논문집
• /
• 제22권6호
• /
• pp.827-834
• /
• 2011

Epoxy/graphite/expanded graphite composites have been prepared in various weight ratios and thermal degradation and electrical properties were estimated in order to use for the bipolar plate materials in PEMFC. Thermogravimetric analysis (TGA) showed that the epoxy/graphite system cured by a curing agent GX-533 was most proper because its weight loss until $80^{\circ}C$ at which PEMFC would be operated was 0.3 wt%, and differential scanning calorimetry (DSC) analysis showed its cure temperature would be sufficient at $80^{\circ}C$. The activation energy for the cure reaction was 132.0 kJ/mol and the pre-exponential factor was $1.76{\times}10^{17}min^{-1}$. Electrical conductivity on the surface of the bipolar plate prepared under a pressure of 200 $kgf/cm^2$ was increased from 4 to 25 $S/cm^2$ by increasing expanded graphite (EG) content from 50 phr to 90 phr. The percolation threshold was initiated around 75 phr and the corrosion rate at 80 phr was 1.903 $uA/cm^2$.

• 한국수소및신에너지학회논문집
• /
• 제27권6호
• /
• pp.660-669
• /
• 2016

A fluorinated-sulfonated, hydrophobic-hydrophilic copolymer was planed subsequently synthesized using typical nucleophilic substitution polycondensation reaction. A novel AB and ABA (or BAB) block copolymers were synthesized using sBCPSBP (sulfonated 4,4'-bis[4-chlorophenyl)sulfonyl]-1,1'-biphenyl), DHN (1,5-dihydroxynaphthalene), DFBP (decafluorobiphenyl) and HFIP (4,4'-hexafluoroisopropylidenediphenol). All block copolymers were easily cast and made into clear films. The structure and synthesized copolymers and corresponding membranes were analyzed using GPC (gel permeation chromatography), $^1H$-NMR ($^1H$ nuclear magnetic resonance) and FT-IR (Fourier transform infrared). TGA (Thermogravimetric analysis) and DSC (differential scanning calorimetry) analysis showed that the prepared membranes were thermally stable, so that elevated temperature fuel cell operation would be possible. Hydrophobic/hydrophilic phase separation and clear ionic aggregate block morpology was confirmed in both triblock and diblock copolymer in AFM (atomic force microscopy), which may be highly related to their proton transport ability. A sulfonated BAB triblock copolymer membrane with an ion-exchange capacity (IEC) of 0.6 meq/g has a maximum ion conductivity of 40.3 mS/cm at $90^{\circ}C$ and 100% relative humidity.

• 한국의류산업학회지
• /
• 제3권3호
• /
• pp.241-248
• /
• 2001

The purpose of this study is to examine the preference according to the domestic fashion company use the character image of the inside and outside of the country, the recognition for the importance of the character by examining the purchasing behavior of high school girls and college women as the major consumer in the character fashion commodity (in the center of the clothe and accessory), and the aid for the self-development and the licensing of the character in the future. This study targeted 491 high school girls and college women in Daegu and Kyung-pook area. The character preference according to the character image applied the fashion commodity was used the scale of seven point modified the S D (Semantic Differential) method for Kim, Chun-Ae's image measure. The followings are the conclusions of this study; Both the group of high school girls and the group of college women almost represented the similar reaction result for the images of 9 characters. For the preference of the group of high school girls and the group of college women for 9 character, for characters Tweety, Bugs Bunny, the group of college women represented more preference than the group of high school girls. However, for characters of Hello Kitty, Pazama sister's and Dalki, the group of high school girls represented more preference than the group of college women.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2004년도 춘계학술발표대회 논문집
• /
• pp.190-193
• /
• 2004

Two different diene monomers [dicyclopentadiene (DCPD) and 5-ethylidene-2-norbomene (ENB)] as self­healing agent for polymeric composites were microencapsuled by in-situ polymerization of urea and formaldehyde. The healing agents were investigated by differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). Exothermic reaction and glass transition temperature from DSC and storage modulus (G') and tan $\delta$ from DMA curves were analyzed for the samples cured for 5 min and 24 h in the presence of different amounts of catalyst. Micorcapsules were successfully formed for both diene monomers. Microcapsules containing the healing agent were manufactured and its thermal properties were characterized by thermo gravimetric analysis (TGA). Optical microscope (OM) and particle size analyzer (PSA) were employed to observe morphology and size distribution of microcapsules, respectively. Comparison of the two self-healing agents and their microcapsules with the two was made in this study.

• Advances in nano research
• /
• 제4권4호
• /
• pp.295-307
• /
• 2016

The present research work reports a low temperature ($40^{\circ}C$) chemical precipitation technique for synthesizing hydroxyapatite (HAp) nanoparticles of spherical morphology through a simple reaction of calcium nitrate tetrahydrate and di-ammonium hydrogen phosphate at pH 11. The crystallinity of the single-phase nanoparticles could be improved by calcinating at $600^{\circ}C$ in air. Thermogravimetric and differential thermal analysis (TG-DTA) revealed the synthesized HAp is stable up to $1200^{\circ}C$. Scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) studies confirmed the formation of spherical nanoparticles with average size of $23.15{\pm}2.56nm$ and Ca/P ratio of 1.70. Brunauer-Emmett-Teller (BET) isotherm of the nanoparticles revealed their porous structure with average pore size of about 24.47 nm and average surface area of $78.4m2g^{-1}$. Fourier transform infrared spectroscopy (FTIR) was used to confirm the formation of P-O, OH, C-O chemical bonds. Cytotoxicity and MTT assay on MG63 osteogenic cell lines revealed nontoxic bioactive nature of the synthesized HAp nanoparticles.

• Elastomers and Composites
• /
• 제41권2호
• /
• pp.108-115
• /
• 2006

비페닐기를 함유하는 새로운 형태의 액정성 폴리우레탄을 신규로 합성한 4,4'-Bis(9-hydroxynonoxy)biphenyl (BP9)와 2,6-tolylene diisocyanate, 2,5-tolylene diisocyanate, 2,4-tolylene diisocyanate, 1,4-phenylene diisocyanate 및 hexamethylene diisocyanate의 중부가 반응에 의해 합성하였다. 단량체 BP9은 스멕틱상을 형성하였으며 1,4-PDI/BP9을 제외한 나머지 폴리우레탄에서는 모두 액정성을 나타내었다. 합성된 단량체와 중합체들의 구조는 적외선분광분석기 및 핵자기공명분석기를 사용하여 확인하였으며, 그들의 열적 상전이 온도 및 안정성들은 시차주사 열량분석기와 편광현미경으로 조사하였다.

• IMMUNE NETWORK
• /
• 제13권2호
• /
• pp.75-79
• /
• 2013

Evidence for immunoregulatory roles of prostaglandins (PGs) is accumulating. Since our observation of PG production by human follicular dendritic cells (FDCs), we investigated the regulatory mechanism of PG production in FDC and attempted to understand the functions of released PGs in the responses of adjacent lymphocytes. Here, using FDC-like cells, HK cells, we analyzed protein expression alterations in cyclooxygenase-2 (COX-2) in the presence of IL-4 or histone deacetylase (HDAC) inhibitors. Both IL-4 and HDAC inhibitors suppressed COX-2 expression in dose-dependent manners. Their effect was specific to COX-2 and did not reach to COX-1 expression. Interestingly, HDAC inhibitors gave rise to an opposing effect on COX-2 expression in peripheral blood monocytes. Our results suggest that IL-4 may regulate COX-2 expression in FDCs by affecting chromatin remodeling and provide insight into the role of cellular interactions between T cells and FDC during the GC reaction. Given the growing interests in wide-spectrum HDAC inhibitors, the differential results on COX-2 expression in HK cells and monocytes raise cautions on their clinical use.

• Bulletin of the Korean Chemical Society
• /
• 제34권5호
• /
• pp.1513-1520
• /
• 2013

Novel chitosan (CS) based membrane networks were developed by solution casting and followed by crosslinking with different crosslinkers such as glutaraldehyde, urea-formaldehyde, and thiourea-formaldehyde. The developed membrane networks were designated as CS-GA, CS-UF and CS-TF. Crosslinking reaction of CS membranes was confirmed by Fourier transform infrared spectroscopy. Membrane rigidity and compactness were studied by the differential scanning calorimetry. The surface morphology of CS membranes was characterized by scanning electron microscopy. The sorption behaviour with respect to contact time, initial pH and initial metal ion concentration were investigated. The maximum adsorption capacity of CS-GA, CS-UF and CS-TF sorbents was found to be 1.03, 1.2 and 1.18 mM/g for $Cu^{2+}$ and 1.48, 1.55 and 2.18 mM/g for $Ni^{2+}$ respectively. Swelling experiments have been performed on the membrane networks at $30^{\circ}C$. Desorption studies were performed in acid media and EDTA and it was found that the membranes are reusable for the metal ion removal for three cycles. The developed membranes could be successfully used for the separation of $Cu^{2+}$ and $Ni^{2+}$ metal ions from aqueous solutions.

• 폴리머
• /
• 제37권1호
• /
• pp.41-46
• /
• 2013

유무기 하이브리드 나노 물질인 polyhedral oligomeric silsesquioxane(POSS)를 첨가한 diglycidyl ether of bisphenol A(DGEBA) 에폭시/방향족 아민계를 다양한 경화온도에서 등온으로 반응시킨 후 유리전이온도($T_g$)와 전환율(${\alpha}$)을 DSC를 이용하여 측정하였다. 등온 경화시간에 따른 $T_g$의 변화 데이터를 임의로 설정된 기준 온도에서 수평 이동시켜 반응초기에 해당하는 속도우세 구간에서 서로 겹치게 하여 이때 필요한 이동 인자를 구하였으며, 이를 이용하여 활성화 에너지를 결정하였다. 또한 POSS가 $T_g$ 및 ${\alpha}$에 미치는 영향을 조사하였으며 이들의 관계를 알기위하여 DiBenedetto식을 이용하여 분석하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1999년도 The 7th Summer Workshop of the Membrane Society of Korea
• /
• pp.48-51
• /
• 1999

To investigate numerically the removal behavior of carbon dioxide in a hollow fiber membrane contactor, the system controlling equations were developed including the nonlinear reversible reaction terms. The reversible chemical reactions were incorporated in the system controlling equations, resulting in the coupled nonlinear partial differential equations which could describe either the absorption of the desorption of carbon dioxide. The computer program was coded using the Fortran language and run with a personal computer to find out the effects of the system variables: the pressures of absorbed and desorbed gases, the absorbent flow rate, the concentration of potassium carbonate, the fiber diameter and the length.