• Nuclear Engineering and Technology
• /
• v.42 no.1
• /
• pp.125-130
• /
• 2010

Sipping measurements were implemented at the Open Pool Australian Light water reactor (OPAL) to test for failure in reactor fuel elements. Fission product released by the fuel element into the pool water was measured using both High Purity Germanium (HPGe) detection via samples and a NaI(Tl) detection in-situ with the sipping device. Results from two fuel elements are presented.

• Journal of Korea Multimedia Society
• /
• v.11 no.10
• /
• pp.1436-1445
• /
• 2008

Currently, mobile handset embeds many communication modules including CDMA and Bluetooth, and many applications are developed based on these modules. In this paper, we study about wireless vehicle diagnosis software and user interface based on bluetooth system on mobile handset. We developed Bluetooth communication system on protocol converter between OBD(On Board Diagnostics)-II system. Based on this system, we can communicate ECU(Engine Control Unit) and mobile device based on windows .NET compact framework platform. Therefore we can easily diagnose vehicle state and obtain engine data. All user interface and vehicle diagnosis systems on mobile handset are developed under windows .NET compact framework platform. Using this system we achieved several improvements over existing vehicle diagnostic system; 1) the software download and upgrade can be achieve on wireless environment, 2) no additional diagnostic devices are requires, which saves additional cost and we can diagnose the vehicle easily, 3) we can easily port our system on many embedded systems including PDA and navigator, etc.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.16 no.4
• /
• pp.53-61
• /
• 2017

Turbocharger is a device for increasing the power of a vehicle engine. The control plate is the main component for fixing the vane of the turbocharger. Now, the control plate is made of austenite steel cutting after the casting process. It has excellent corrosion, heat resistance and mechanical characteristics of material. However, present the process is made by cutting after casting. when cutting is processed after casting, so materials, processing time, and processing energy are lost. Therefore, this study proposes a process to powder compact use of stainless steel Deklak2 and to minimize amount of cutting through net shape process. The mechanical properties of Deklak2 were verified by tensile test, hardness test and relative density measurement, and the governed equation was defined. Also, the curvature radius 1, 2 and the density, affects the shape, were selected as the design parameters, and the best process conditions was proposed through the Taguchi method and the evaluation of SN ratio. And then prototype molds were fabricated and compared with the results of the finite element analysis for the verification, and it was found that the tendency of relative density and dimension was coincided. Therefore, it was found that the amount of cutting can be minimized by only the net shape process after the sintering process and it can be applied to mass production.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.10
• /
• pp.977-985
• /
• 2012

Recently, many countries have been developing new protocols to improve the performance of tactical ad hoc networks for implementing NCW (Network Centric Warfare). Combat net radio (CNR) networks are the most important communication infra for the ground forces such as infantry of Army. U.S. Army had developed MIL-STD-188-220D that is the Interoperability Standard for DMTDs (Digital Messages Transfer Device Subsystems) for voice and data communication in CNR. MIL-STD-188-220D is a candidate for MAC protocol of TMMR which is next radio and has a few constraints to used in TMMR. NAD (Network Access Delay) defined in MIL-STD-188-220D needs time synchronization to avoid collision. However, it is difficult for time synchronization to fit in multi-hop environment. We suggest the enhanced DAP (Deterministic Adaptable Priority)-NAD to prevent conflicts and decrease delays in multi-hop CNR. Simulation results show that the proposed scheme improves the performance in multi-hop CNR networks.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.1
• /
• pp.55-67
• /
• 2023

Lightweight face recognition models, as one of the most popular and long-standing topics in the field of computer vision, has achieved vigorous development and has been widely used in many real-world applications due to fewer number of parameters, lower floating-point operations, and smaller model size. However, few surveys reviewed lightweight models and reimplemented these lightweight models by using the same calculating resource and training dataset. In this survey article, we present a comprehensive review about the recent research advances on the end-to-end efficient lightweight face recognition models and reimplement several of the most popular models. To start with, we introduce the overview of face recognition with lightweight models. Then, based on the construction of models, we categorize the lightweight models into: (1) artificially designing lightweight FR models, (2) pruned models to face recognition, (3) efficient automatic neural network architecture design based on neural architecture searching, (4) Knowledge distillation and (5) low-rank decomposition. As an example, we also introduce the SqueezeFaceNet and EfficientFaceNet by pruning SqueezeNet and EfficientNet. Additionally, we reimplement and present a detailed performance comparison of different lightweight models on the nine different test benchmarks. At last, the challenges and future works are provided. There are three main contributions in our survey: firstly, the categorized lightweight models can be conveniently identified so that we can explore new lightweight models for face recognition; secondly, the comprehensive performance comparisons are carried out so that ones can choose models when a state-of-the-art end-to-end face recognition system is deployed on mobile devices; thirdly, the challenges and future trends are stated to inspire our future works.

• Nuclear Engineering and Technology
• /
• v.52 no.8
• /
• pp.1764-1770
• /
• 2020

The present work was mainly concerned with studying the operation of RC-phase shift oscillator based on MOSFET type 2N6660 under the influence of different temperature levels ranging from room temperature (25 ℃) up-to135 ℃ and gamma-irradiation up-to 3.5 kGy. In this concern, both the static (I-V) characteristic curves of MOSFET devices and the output signal of the proposed oscillator were recorded under ascending levels of both temperature and gamma-irradiation. From which, it is clearly shown that the drain current was decreased from 0.22 A, measured at 25 ℃, down to 0.163 A, at 135 ℃. On the other hand, its value was increased up-to 0.49 A, whenever the device was exposed to gamma-rays dose of 3.5 kGy. Considering RC-phase shift oscillator, the oscillation frequency and output pk-pk voltage were decreased whenever MOSFET device exposed to gamma radiation by ratio 54.9 and 91%, respectively. While, whenever MOSFET device exposed to temperature the previously mentioned parameters were shown to be decreased by ratio 2.07 and 46.2%.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2003.09a
• /
• pp.109-119
• /
• 2003

o In order to start SIP Project .Marketing (& ASIC team) should present biz planning, schedule, device/SIP specs., in SIP TFT prior to request SIP development for package development project. .In order to prevent (PCB) revision, test, burn-in, & quality strategy should be fixed by SIP TFT (PE/Test, QA) prior to request for PKG development. .Target product price/cost, package/ test cost should be delivered and reviewed. o Minimum Information for PCB Design, Package Size, and Cost .(Required) package form factor: size, height, type (BGA, QFP), Pin count/pitch .(Estimated) each die size including scribe lane .(Estimated) pad inform. : count, pitch, configuration(in-line/staggered), (open) size .(Estimated) each device (I/O & Core) power (especially for DRAM embedded SIP) .SIP Block diagram, and net-list using excel sheet format o Why is the initial evaluation important\ulcorner .The higher logic power resulted in spec. over of DRAM Tjmax. This caused business drop longrightarrow Thermal simulation of some SIP product is essential in the beginning stage of SIP business planning (or design) stage. (i.e., DRAM embedded SIP) .When SIP is developed using discrete packages, the I/O driver Capa. of each device may be so high for SIP. Since I/O driver capa. was optimized to discrete package and set board environment, this resulted in severe noise problem in SIP. longrightarrow In this case, the electrical performance of product (including PKG) should have been considered (simulated) in the beginning stage of business planning (or design).

• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2221-2228
• /
• 2021

One-dimensional oxygen transport relation is indispensable to study the oxygen distribution in the LBE-cooled system with an oxygen control device. In this paper, a numerical research is carried out to study the oxygen transport characteristics in a gas-phase oxygen control device, including the static case and dynamic case. The model of static oxygen control is based on the two-phase VOF model and the results agree well with the theoretical expectation. The model of dynamic oxygen control is simplified and the gas-liquid interface is treated as a free surface boundary with a constant oxygen concentration. The influences of the inlet and interface oxygen concentration, mass flow rate, temperature, and the inlet pipe location on the mass transfer characteristics are discussed. Based on the results, an oxygen mass transport relation considering the temperature dependence and velocity dependence separately is obtained. The relation can be used in a one-dimensional system analysis code to predict the oxygen provided by the oxygen control device, which is an important part of the integral oxygen mass transfer models.

• Nuclear Engineering and Technology
• /
• v.53 no.4
• /
• pp.1284-1288
• /
• 2021

In this work, we propose and design a GaN-based diode with a p-doped GaN (p-GaN) multi-well structure for high efficiency betavoltaic (BV) cells. The short-circuit current density (J_SC) and opencircuit voltage (V_OC) of the devices were investigated with variations of parameters such as the doping concentration, height, width of the p-GaN well region, well-to-well gap, and number of well regions. The J_SC of the device was significantly improved by a wider depletion area, which was obtained by applying the multi-well structure. The optimized device achieved a higher output power density by 8.6% than that of the conventional diode due to the enhancement of J_SC. The proposed device structure showed a high potential for a high efficiency BV cell candidate.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1652-1657
• /
• 2021

Nuclear materials can be utilized not only for peaceful uses, but also for military purposes; hence, the international community has devoted itself to the control, management and safeguarding of nuclear materials. Nuclear materials are of varying degrees of usability for development of nuclear weapons. Thus, several methods for assessing the attractiveness of nuclear materials for nuclear weapons purposes have been proposed. When these methods are applied to unirradiated depleted, natural, and low-enriched uranium (DU, NU, and LEU), they are certainly classified as non-attractive nuclear materials. However, when nuclear material attractiveness is to be evaluated for potential radiological dispersal device (RDD) uses, it is required to develop a different method for the different aspects and factors. In the present study, we derived a novel method for evaluating nuclear material attractiveness for use in RDD development. To this end, the specific activity and dose coefficient were identified as the two sub-factors, and, in consideration of those, the mass causing detrimental health effects was determined to be the main factor impacting on nuclear materials attractiveness. Based on this factor, the attractiveness of unirradiated DU, NU, and LEU for RDD use was qualitatively compared with that of ¹³⁷Cs.