• 한국안전학회지
• /
• 제23권2호
• /
• pp.1-6
• /
• 2008

The present study investigates on improvement of inhalation efficiency of hood in ventilation system for elimination of industrial dust. The hood, one of local exhaust ventilation system, has an important function to inhale a pollution source such as harmful dust and industrial waste. In this study, in order to improve the inhalation efficiency of the industrial hood, a new device named "gas-guide-device" was attached to inside of hood. The thermal fluid commercial code "Phoenics ver 3.1" was used to analyze the flow velocity distribution at the hood inlet and around the hood after gas-guide-device was installed. And the flow velocity on each position inside and around the hood was actually measured using the hot wire type anemometer under the same condition as that of numerical analysis. Also, in order to identify the optimum shape of gas-guide-device, numerical analysis and experiments are performed under various conditions and their results are presented. The results of this study revealed that the hood attached with gas-guide-device was higher the inhalation efficiency than that for without one and can be possible to improve the capture velocity of the industrial dust. And the optimum shape of gas-guide-device was identified that the ratio of two sizes of gas-guide-device, X to Y, has 4 to 6 on the basis of the hood size in use and the width (b) of gas-guide-device.

• 웰빙융합연구
• /
• 제4권3호
• /
• pp.1-9
• /
• 2021

Purpose: This study was conducted to develop a module with higher removal efficiency and effectiveness by adapting two or more deodorization techniques for main cause of odor pollution exposed citizen living near water treatment facilities. Research design, data and methodology: To consider the standard, unity, electrical wire, compatibility of detachable device by installing two types of dry deodorization device within one module for easy replacement. Complex odor, H₂S, NH₃ were collected from sewage treatment facilities for evaluation of deodorization device. Results: Using the developed application in this study, removal efficiency of complex odor, H₂S, NH₃ were 93%, 100%, 82%, respectively. Conclusions: The H₂S removal efficiency of deodorization device was higher than bio-filter system, which were currently used by sewage treatment. Further, the device should be considered for use in efficient odor removal system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.436-437
• /
• 2007

Organic light-emitting diodes (OLEDs) were fabricated with the electron dominant complex, 4,7-diphenyl-1, 10-phenanthroline (Bphen) into the traditional electron transporting material of tris (S-hydroxyquinoline) aluminum $(Alq_3)$, neat $Alq_3$ and Bphen as electron-transporting layers (ETLs), respectively. Use of the Bphen material results in efficient electron injection and transport, allowing for high luminous efficiency devices. The devices with neat $Alq_3$(Device1), 1:1 mixed $Alq_3$ : Bphen(Device2), and Bphen(Device3) have efficiency of 15.3cd/A, 16.9cd/A, 20.9cd/A, respectively, at $20\;mA/cm^2$. The efficiency characteristic of device with Bphen is best, but the device that is satisfied high efficiency and stability at once is observed in Device2.

• Journal of information and communication convergence engineering
• /
• 제20권3호
• /
• pp.143-152
• /
• 2022

The ongoing adoption of 5G will increase the data traffic, throughput, multimedia services, and power consumption for future wireless applications and services, including sensor and mobile networks. Multipath fading on wireless channels also reduces the system performance and increases energy consumption. To address these issues, device-to-device (D2D) and cooperative communications have been proposed. In this study, we propose two inter-clustering models using the relay selection method to improve system performance and increase energy efficiency in cooperative D2D networks. We develop two inter-clustering models and present their respective algorithms. Subsequently, we run a computer simulation to evaluate each model's outage probability (OP) performance, throughput, and energy efficiency. The simulation results show that inter-clustering model II has the lowest OP, highest throughput, and highest energy efficiency compared with inter-clustering model I and the conventional inter-clustering-based multirelay method. These results demonstrate that inter-clustering model II is well-suited for use in 5G overlay D2D and cellular communications.

• 센서학회지
• /
• 제20권4호
• /
• pp.230-233
• /
• 2011

In this paper, highly-efficient optical gating in a junction device based on vanadium dioxide($VO_2$) thin film grown by a sol-gel method was investigated as a gate terminal of a three-terminal device using infrared light with a wavelength of ~1554.6 nm. Due to the photoinduced phase transition, the threshold voltage of the $VO_2$ junction device, at which the device current abruptly jumps, could be tuned with a sensitivity of ~96.5 V/W by adjusting the optical power of the infrared light directly illuminating the device. Compared with the tuning efficiency of the previous device fabricated using $VO_2$ thin film deposited by a pulsed laser deposition method, the threshold voltage of this device could be tuned by ~76.8 % at an illumination power of ~39.8 mW resulting in a tuning efficiency of ~1.930 %/mW, which is ~4.9 times larger than the previous device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 센서 박막재료
• /
• pp.27-31
• /
• 2001

We fabricated organic electroluminescent(EL) devices with mixed emitting layer of poly(N-vinylcarbazole)(PVK), 2,5-bis(5'-tert-butyl-2-benzoxazoly)thiophene(BBOT), N,N'-diphenyl-N,N'-(3-methyphenyl)-1,1'-biphenyl-4, 4'-diarnine(TPD) and poly(3-hexylthiophene)(P3HT). To improve the external quantum efficiency of EL devices, we added the functional layer to the devices such as LiF insulating layer, carrier confinement layer(BBOT) and hole injection layer(CuPc). In the ITO/emitting layer/Al device, the maximum quantum efficiency at 15V was $1.88{\times}10^{-5}%$. And then, it is increased by a factor of 27 to $5.2{\times}10^{-3}%$ in ITO/CuPc/emitting layer/BBOT/LiF/Al device at 15V.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.173-177
• /
• 2008

We have developed the transparent passivation layer for top emission organic light emitting diodes using CsCl thin film by the thermal evaporation method. The CsCl film was deposited on the Ca/Ag semitransparent cathode. The optical transmittance of Ca/ Ag/CsCl triple layer is higher than that of Ca/Ag double layer in the visible range. The device with a structure of glass/Ni/2-TNATA/a-NPD/Alq3:C545T/BCP/Alq3/Ca/Ag/CsCl results in higher efficiency than the device without CsCl passivation layer. The device without CsCl thin film shows a current efficiency of 7 cd/A, whereas the device passivated with CsCl layer shows an efficiency of 10 cd/A. This increase of efficiency isresulted from the increased optical extraction by the CsCl passivation layer.

• 전기학회논문지
• /
• 제66권10호
• /
• pp.1540-1546
• /
• 2017

In piezoelectric device applications, it is important to improve a system efficiency because of the low generated power. In this paper, an optimal driving method is proposed to improve a system efficiency for a piezoelectric energy harvesting system. The proposed method considers disappear energy in input capacitors and the converter efficiency according to the input voltage magnitude to minimize energy losses. Experimental results based on various energy generation cases verify that the proposed method significantly improves the system efficiency; the efficiency is approximately 9.97% higher than that of the conventional method.

• 한국응용과학기술학회지
• /
• 제19권4호
• /
• pp.297-301
• /
• 2002

We investigated the effect of electron injection layer on the performance of organic light emitting devices (OLEDs). As an electron injection layer, the quinolate metal complexes were used. We optimized the device efficiency by varying the thickness of the quinolate metal complexes layer. The device with 1 nm of the quinolate metal complexes layer showed significant enhancement of the device performance and device lifetime. We also compared the effect of 8-hydroxyquinolinolatolithium (Liq) with that of bis(8-quinolinolato)-zinc ($Znq_{2}$) and 8-hydroxyquinolinolatosodium (Naq) as an electron injection layer. As a result, Liq is considered as a better materials for the electron injection layer than $Znq_{2}$ and Naq.

• 한국전기전자재료학회논문지
• /
• 제21권6호
• /
• pp.569-574
• /
• 2008

In the device structure of ITO/tris(8-hydroxyquinoline) aluminum ($Alq_3$)/Al device, we investigated the efficiency improvement of organic light-emitting diodes (OLEDs) depending on the hole-size of crucible boat. The device was manufactured using a thermal evaporation under the base pressure of $5{\times}10^{-6}\;Torr$. The $Alq_3$ organics were evaporated to be 100 nm thick at a deposition rate of $1.5\AA/s$, and in order to investigate the optimal surface roughness of $Alq_3$, the $Alq_3$ was thermally evaporated to be 0.8 mm, 1.0 mm, and 1.5 mm as a hole-size of the boat, respectively. We found that luminance and external quantum efficiency are superior when the hole-size of the boat is 1.0 mm. The external quantum efficiency of the device made with the hole-size of 1.0 mm boat were improved by a factor of ten compared to the devices made with the hole-size of non boat.