• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.3
• /
• pp.602-608
• /
• 2019

The purpose of this study was to calculate the temperature difference of the sectional elevation according to the asphalt thickness of the steel box girder bridge deck and provide data on the design basis accordingly. Asphalt thicknesses produced four steel box girder model specimens of 0mm, 50mm, 100m and 150mm. In each model, 17 to 23 temperature sensors were attached to upper concrete and steel box girders. Six temperature gauges were selected to compare the temperature difference with Euro codes. The maximum and lowest temperature were calculated at the reference atmospheric temperature of each model, and the temperature difference (slope) was calculated based on this calculation. Four models of temperature difference are presented at each model. The 0mm to 100mm temperature difference models showed a -0.9 to -1.5 degree lower temperature difference compared to the temperature difference of Euro codes at the top of the slab. Overall, the measured temperature difference was found to be between 5.45% and 8.33% compared to the Euro code. The standard error coefficient, which was calculated by multiplying the average temperature with the standard error, was calculated from a range of 2.50 to 2.51 times the average at the top and bottom. It is estimated that the proposed temperature difference model can be used as a basic data when calculating temperature difference criteria for bridges in Korea.

• Asian Spine Journal
• /
• v.12 no.6
• /
• pp.1085-1091
• /
• 2018

Study Design: Case-control. Purpose: To determine optimal cut-off value for body mass index (BMI) in predicting surgical success in patients with lumbar spinal canal stenosis (LSCS). Overview of Literature: BMI is an essential variable in the assessment of patients with LSCS. Methods: We conducted a prospective study with obese and non-obese LSCS surgical patients and analyzed data on age, sex, duration of symptoms, walking distance, morphologic grade of stenosis, BMI, postoperative complications, and functional disability. Obesity was defined as BMI of ${\geq}30kg/m^2$. Patients completed the Oswestry Disability Index (ODI) questionnaire before surgery and 2 years after surgery. Surgical success was defined as ${\geq}30%$ improvement from the baseline ODI score. Receiver operating characteristic (ROC) analysis was used to estimate the optimal cut-off values of BMI to predict surgical success. In addition, correlation was assessed between BMI and stenosis grade based on morphology as defined by Schizas and colleague in total, 189 patients were eligible to enter the study. Results: Mean age of patients was $61.5{\pm}9.6years$. Mean follow-up was $36{\pm}12months$. Most patients (88.4%) were classified with grades C (severe stenosis) and D (extreme stenosis). Post-surgical success was 85.7% at the 2-year follow-up. A weak correlation was observed between morphologic grade of stenosis and BMI. Rates of postoperative complications were similar between patients who were obese and those who were non-obese. Both cohorts had similar degree of improvement in the ODI at the 2-year followup. However, patients who were non-obese presented significantly higher surgical success than those who were obese. In ROC curve analysis, a cut-off value of ${\leq}29.1kg/m^2$ for BMI in patients with LSCS was suggestive of surgical success, with 81.1% sensitivity and 82.2% specificity (area under the curve, 0.857; 95% confidence interval, 0.788-0.927). Conclusion: This study showed that the BMI can be considered a parameter for predicting surgical success in patients with LSCS and can be useful in clinical practice.

• Journal of Digital Convergence
• /
• v.16 no.11
• /
• pp.221-230
• /
• 2018

Most of researchers and business futurists agree that traditional organizational designs are inadequate for coping with today's turbulent and increasingly networked world. Executives in small firms find that their organizations must tap into an extended network of partners to achieve the scale and power needed to succeed in industries dominated by large, global firms. As they attempt to build lean yet agile businesses, these executives are finding that they no longer rely on gut instinct alone. Neither can they simply copy organizational model that worked in the past. They must understand how organizational design choices influence operational efficiency and flexibility and, even more important, how to best align the organization with the environment and the strategy chosen to quickly and effectively sense and respond to opportunities and threats This research examines the capabilities required to build businesses that can survive and prosper in today's fast-faced and uncertain environment. The insights presented in this research have emerged from over 30 years of work with hundreds of executives and entrepreneurs as they struggled to build businesses that could cope with the demands of a rapidly changing, networked global economy. The insights from this research suggest that IT is an important enabler for developing the best capabilities required for success.

• Journal of the Korean earth science society
• /
• v.40 no.2
• /
• pp.177-187
• /
• 2019

Several volcanic activities have continued in Mt. Baekdu since the Millennium eruption, and these phenomena have increased the need for volcanic activity surveillance. Various geophysical approaches are needed to obtain the depth and size of magma chamber that lie several kilometers below the surface. We examined the applicability of direct-current resistivity survey in this study. In order to explore the deep magma chamber of Mt. Baekdu, which has a spatial limitation due to the borderline, a large-scale survey with a length of tens of kilometers should be conducted. This type of survey requires a distributed measurement system and optimized exploration designs. Therefore, we propose survey designs taking advantage of our developed distributed acquisition system and analyze the applicability using numerical simulation. We confirmed that our designs that use single survey line with offline transmitting points show comparable results to the conventional 3D survey. It is expected that our research result can contribute to the deep geophysical exploration in Mt. Baekdu.

• Journal of Animal Science and Technology
• /
• v.61 no.4
• /
• pp.204-215
• /
• 2019

This experiment was conducted to evaluate the effect of dietary energy and crude protein (CP) levels on growth performance, blood profiles, and carcass traits in growing-finishing pigs. A total of 180 crossbred pigs ([Yorkshire ${\times}$ Landrace] ${\times}$ Duroc) with an average body weight of $30.96{\pm}3.068kg$ were used for a 12-week feeding trial. Experimental pigs were allotted to a $2{\times}3$ factorial arrangement using a randomized complete block (RCB) design. The first factor was two levels of dietary metabolizable energy (ME) density (13.40 MJ/kg or 13.82 MJ/kg), and the second factor was three dietary CP levels based on subdivision of growing-finishing phases (high: 18%/16.3%/16.3%/13.2% middle: 17%/15.3%/15.3%/12.2% and low: 16%/14.3%/14.3%/11.2%). Average daily gain (ADG) and gain-feed ratio (G:F ratio) decreased as dietary CP level was decreased linearly (linear, p < 0.05; p < 0.05, respectively) in the early growing period, and G:F ration also decreased as dietary CP level was decreased linearly (linearly, p < 0.05) over the whole growing phase. Over the entire experimental period, G:F ratio decreased as dietary ME level decreased (p = 0.01). Blood urea nitrogen (BUN) concentration was increased as dietary energy level decreased in growing period (p < 0.01). During finishing period, total protein concentration was decreased by lower dietary energy level (p < 0.05). In this study, there were no significant differences in proximate factors, physiochemical properties, muscle TBARS assay results, pH changes, or color of pork by dietary treatments. However, saturated fatty acid (SFA) increased (p < 0.01) and polyunsaturated fatty acid (PUFA) decreased (p < 0.05) when ME was decreased by 0.42 MJ/kg in growing-finishing pig diets. In addition, monounsaturated fatty acid (MUFA) tended to increase when CP level was decreased in growing-finishing pig diets (p = 0.06). A growing-finishing diet of 13.82 MJ/kg diet of ME with the high CP level can improve growth performance and show better fatty acids composition of pork.

• Journal of Animal Science and Technology
• /
• v.61 no.3
• /
• pp.154-162
• /
• 2019

This experiment was conducted to evaluate the effect of dietary energy and crude protein (CP) levels on reproductive performance, litter performance, milk quality, and blood profiles in gestating sows. A total of 59 multiparous sows (Yorkshire ${\times}$ Landrace) with similar body weights (BW), backfat thickness (BF), and parity were assigned to one of six treatments with 9 or 10 sows per treatment using a $2{\times}3$ factorial arrangement and completely randomized design. The first factor was two levels of dietary metabolizable energy (ME) density (13.40 or 13.82 MJ/kg) and the second factor was three dietary protein levels based from 35 day in gestating phases (10.5%, 12%, and 13.5%). Backfat thickness change in lactating sows decreased linearly as CP level increased (p = 0.03). Increased energy level in the gestating sow diet tended to increase the total number of piglets born (p = 0.07), but piglet weight decreased (p = 0.02). Dietary CP level had a negative effect on colostrum quality. Casein, protein, total solid, and solids-not-fat concentrations decreased linearly and lactose level increased linearly as CP level in the gestating sow diet increased (casein%: p = 0.03; protein%: p = 0.04; lactose%: p = 0.06; total solids: p = 0.03; solid-not-fat: p = 0.03, respectively). However, improving ME by 0.42 MJ/kg had no significant effect on the chemical composition of sow colostrum. There were no significant differences in blood glucose concentration in gestating sows when sows were fed different levels of energy during gestation, but blood glucose increased at 21 day of lactation when energy increased by 0.42 MJ/kg (p = 0.04). Blood urea nitrogen concentration increased linearly when dietary CP levels increased at 110 day in gestation, 24-hours postpartum, and 21 days of lactation (linear, p < 0.05, p < 0.05, and p < 0.05, respectively), and it also increased when dietary energy increased at 110 days of gestation and 24-hours postpartum (p < 0.01, and p < 0.01, respectively). A gestating sow diet containing 13.82 MJ/kg ME and 10.5% CP can improve reproductive performance, litter performance, and colostrum quality.

• Korean Journal of Environmental Biology
• /
• v.36 no.3
• /
• pp.412-423
• /
• 2018

In this study, we investigated the distribution and habitat of Tscherskia triton from 2014 to 2016 in Jeju Island. Nine individuals of T. triton were observed and captured from four habitat sites. Most of the habitats were of the natural and rural type, and urban type coexisted in some of the areas. The natural type of habitat comprised of forests, shrubs, and grasslands. The habitat of T. triton ranged vertically from 102 m in lowland to 742 m in a mountainous area and was not observed in altitude over 1,000 m. Small brooks, dry streams or wetlands were found to be located nearby the habitat of T. triton. The T. triton was distributed mainly in areas with natural vegetation and artificial plantation in company with the upper story vegetation on the ground of intact or incomplete layer structure, or the area with the relatively large distribution of shrubs and long grassland. The presence of roads and forest paths in these habitats suggested that the T. triton can thrive in areas with human disturbance. The designation of Halla Mountain National Park in Jeju Island as a conservation area prevents damage or loss of the habitat due to any artificial development. However, frequent human disturbances occurring in grassland is tolerated by small mammals. Therefore, in order to help T. triton maintain a stable population density, it is essential that various types of the habitat should be conserved in the middle mountain areas and the grasslands in lowlands should be well protected.

• Journal of the Korean Society of Radiology
• /
• v.13 no.3
• /
• pp.319-324
• /
• 2019

A depth-encoding detector module with silicon photomultipliers(SiPMs) using two layers of scintillation crystal array was designed, and the position measurement capability was verified using DETECT2000. The depth of interaction of the crystal pixels with the gamma rays was tracked through the image acquired with the combination of surface treatment of the crystal pixels and reflectors. The bottom layer was treated as a reflector except for the optically coupled surfaces, and the crystals of top layer were optically coupled each other except for the outer surfaces so that the light sharing was made easier than the bottom layer. Flood images were obtained through the combination of specular reflectors and random reflectors, grounded and polished surfaces of crystal pixels, and the positions at which layer images were generated were measured and analyzed. The images were reconstructed using the Anger algorithm, whose the SiPM signals were reduced as the 16-channels to 4-channels. In the combination of the grounded surface and all reflectors, the depth positions were discriminated into two layers, whereas it was impossible to separate the two layers in the all polished surface combinations. Therefore, using the combination of grounded surface crystal pixels and reflectors could improve the spatial resolution at the outside of the field of view by measuring the depth position in preclinical positron emission tomography.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.1
• /
• pp.27-35
• /
• 2019

The existing middle-long span railway bridge has been mainly applied to steel box girder bridges. However, the steel box girder bridges have disadvantages in securing the space under the bridge, and the main girder is made of a thin plate box shape, resulting in a ringing noise due to the vibration. Many complaints about noise have been raised. For this reason, there is a need for the development of long railway bridges that can replace steel box girder bridges. In this paper, the characteristics of the steel composite railway bridge currently developed were introduced and a time history analysis was conducted using MIDAS Civil reflecting the speed of KTX load for 40m and 50m bridges. In addition, from the analysis results, the dynamic behavior of target bridges were verified and it was examined whether they meet the dynamic performance criteria proposed in the railway design standards. As a result, all of the bridges under review satisfied the dynamic safety criteria, however, in case of 40m of span, the vertical acceleration value was very large. In order to solve this problem, authors proposed the improvement plan and corrected the cross section to confirm that the vertical acceleration decreased.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.38-63
• /
• 2017

This study sets out to investigate the installation of royal kilns and its impact on local kilns, taking note of celadon vase with inlaid cloud pattern in Joseon Dynasty. For that purpose, it determined the kilns and period to produce celadon vases with inlaid cloud pattern, and compared them with the pattern, design, and deformity of the celadon vases produced in the royal kilns in the 15th centuries. The celadon vase with inlaid cloud pattern was superior in quality than the porcelain for tribute ware manufactured together in Jeolla Province before the installation of royal kilns. And then a majority of sagijangs at local kiln had difficult time securing enough supply of manpower and resources, and discontinued manufacturing the celadon vase with inlaid cloud pattern. En revanche, celadon vases with inlaid cloud pattern produced from specially fixed royal kilns reflected the local sagijang's skill. Local kilns were strongly influenced by the installation of royal kilns. Those could not freely use high-quality white clay, limited to the market. Besides, most of the skillful sagijangs were assigned to royal kilns. Celadon vases with inlaid cloud pattern can be used as evidence to show that the manufacturing technique was transferred from local kilns to the royal kilns as well as to show that their production in royal kilns soon became stabilized.