• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2007년도 정기학술발표대회 논문집
• /
• pp.322-326
• /
• 2007

최근 건설 프로젝트의 규모가 커짐에 따라 건축, 구조, 기계, 전기, 토목, 조경 등 각 엔지니어링 분야의 참여자가 증가하게 되었고, 다수의 참여자들 사이의 의사소통과 정보교환을 관리하는 협력설계관리의 필요성이 제기되고 있는 실정이다. 이에 설계프로젝트 참여자들의 역할 및 업무가 설계단계에서 발생되는 정보의 종류와 시기를 파악하고 국내 설계 사무소의 협력설계 관리현황을 살펴본다. 이를 토대로 설계자와 엔지니어들의 일반적인 업무수행과 의사결정을 지원하고, 설계변경이나 공종별 Interface 간섭시 즉각적인 문제해결을 가능하게 하는 설계사무소와 엔지니어링 업체간 지속적 정보교환관리 시스템의 개발 방향을 제시한다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2006년도 정기 학술대회 논문집
• /
• pp.483-489
• /
• 2006

This study describes the XML -based digitalization of structural design sheets for exchange on the web. For this purpose the data model of the XML document that represents the structural design sheets for buildings, including mathematical expressions and graphics that cannot be easily exchanged on the web, is defined. Then, the prototype that facilitates the web-based exchange of the XML documents is developed and the feasibility of the results of this study is discussed.

• 전기학회논문지
• /
• 제58권10호
• /
• pp.2052-2058
• /
• 2009

The standardized and open information model called common language and information exchange format should be firstly defined for the interoperable power system and two-way information exchange among the components of the power system. The information models and information exchange formats for power facilities and power system applications are being defined in power system area, but the information model and information exchange format for the consumer area are not being yet defined besides of metering information model. An architecture and open standard for the information exchange between energy service provider and consumer are required to provide various value added services through the networking with devices in consumer premise. In this paper, an architecture for the two-way communications between energy service provider and consumer is defined and psXML(power system XML) for the information exchange is designed.

• 공업화학
• /
• 제23권1호
• /
• pp.86-92
• /
• 2012

이온교환수지(ion exchange resin; IER)를 이용하여 이산화염소($ClO_2$)의 전구체 용액인 아염소산나트륨($NaClO_2$) 용액으로부터 아염소산이온($ClO_2^-$)을 흡착시킨 후 전기분해장치(electrolysis system)에 의한 이산화염소 가스 발생 특성을 조사하였다. 이온교환수지는 강염기성 음이온교환수지를 사용하였으며, 전극으로는 Ru, Ir이 코팅된 Ti plate를 사용하였다. 반응조의 교반속도, 온도, 아염소산 제조농도, 이온교환수지의 투입량과 형태에 따라 이온교환수지의 아염소산이온($ClO_2^-$) 흡착량에 미치는 영향을 조사하고 최대 흡착량을 나타내는 이온교환수지를 도출하였다. 전기분해장치에 의한 이산화염소의 발생 추이를 관찰하고 발생 목표값에 최적화된 조건을 실험계획법인 반응표면분석(response surface design)으로 선정하였다. 최대 흡착량을 나타내는 강염기성 음이온교환수지는 SAR-20 (TRILITE Gel type II형)이며 그 흡착량은 약 110 mg/IER (g)으로 관찰되었으며, 전기분해장치의 이산화염소 발생 최적조건은 멸균 목표값인 900~1000 ppm, 1 h에서 정전류는 전류인가 전극의 면적을 기준으로 $A/dm^2$, $N_2$ gas 유량은 4.7 L/min이었다.

• 한국CDE학회논문집
• /
• 제9권1호
• /
• pp.11-18
• /
• 2004

CAD systems have been developed with network technology and it is needed to exchange product data among them. STEP becomes world-wide international standard to exchange CAD data among various heterogeneous CAD systems in manufacturing industrial fields. We report results to test errors that can happen when exchanging STEP files of product model through the STEP translator of different commercial CAD systems. Also the tests of Korean Character, Hangul, have been carried out. And also we report the STEP rallies held twice in Korea and several rounds abroad, and their testing results are shown as tables and graphs. The tested results can be used for exchanging product models to the next domestic STEP Rally and extended to Northeastem Asian STEP rally by steadily contacting with the organizations for Asian STEP centers such as JSTEP(Japan) and CSTEP(China). Finally we expect that the result can be used to specify STEP standardization in the field of managing product data.

• Smart Structures and Systems
• /
• 제21권3호
• /
• pp.263-278
• /
• 2018

Thermal Exchange Optimization (TEO) is a newly developed algorithm which mimics the thermal exchange between a solid object and its surrounding fluid. In this paper, an improved version of the TEO is developed to fix the shortcomings of the standard version. To demonstrate the viability of the new algorithm, the CEC 2016's single objective problems are considered along with the discrete size optimization of benchmark skeletal structures. Problem specific constraints are handled using a fly-back mechanism. The results show the validity of the improved TEO method compared to its standard version and a number of well-known algorithms.

• 반도체디스플레이기술학회지
• /
• 제16권3호
• /
• pp.106-110
• /
• 2017

Due to the plasma applied from the outside, which acts as an etchant during the etching process, considerable heat is transferred to the wafer and a separate cooling process is performed to effectively remove the heat after the process. In this case, a direct cooling method using a refrigerant is suitable for cooling through effective heat exchange. The direct cooling method using the refrigerant using the latent heat exchange is superior to the cooling method using the sensible heat exchange. Therefore, in this paper, AMESim is used to design a direct refrigerant cooling system using latent heat exchange simulator was built.The constructed simulator is reliable compared with the actual experimental results. It is expected that this simulator will help to design and search for optimal process conditions.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.100-103
• /
• 2018

Due to the plasma applied from the outside, which acts as an etchant during the etching process, considerable heat is transferred to the wafer and a separate cooling process is performed to effectively remove the heat after the process. In this case, a direct cooling method using a refrigerant is suitable for cooling through effective heat exchange. The direct cooling method using the refrigerant using the latent heat exchange is superior to the cooling method using the sensible heat exchange. Therefore, in this paper, AMESim is used to design a direct refrigerant cooling system using latent heat exchange simulator was built.The constructed simulator is reliable compared with the actual experimental results. It is expected that this simulator will help to design and search for optimal process conditions.

• 유통과학연구
• /
• 제13권2호
• /
• pp.15-24
• /
• 2015

Purpose - Foreign exchange risk control is in an important component in the international supply chain management. This study shows the importance of the reference period in forecasting future exchange rates with a specific illustration of KIKO currency option contracts, and suggests feasible preventive measures. Research design, data, and methodology - Using monthly Won-Dollar exchange rate data for January 1995~July 2007, I evaluate the statistical characteristics of the exchange rate for two sub-periods; 1) a shorter period after the East Asian financial crisis and 2) a longer period including the financial crisis. The key instrument of analysis is the basic normal distribution theory. Results - The difference in the reference period could lead to an unexpected development in contract implementation and a consequent financial loss. We may avoid foreign exchange loss by using derivatives such as forwards or currency options. Conclusions - We should consider not only level values but also the volatilities of financial variables in making a binding financial contract. Appropriate measures may differ depending on the specific supply chain pattern. We may extend the study with surveys on actual risk measures.

• 한국군사과학기술학회지
• /
• 제18권6호
• /
• pp.771-778
• /
• 2015

In this paper, we have proposed a design method for standardization of weapon information exchange between a weapon control computer of guided missile system and a high echelon command and control system. Because the weapon control computer based on diverse combat platforms is operated with several kinds of a high echelon system, it is necessary to provide a standardized design method for weapon information exchange between mutual system. In fact, it is possible to standardize a interface design specification of weapon information message because weapon information message is closely related to standard tactical data link message. It is essential that the interface design specification of weapon information is submitted to that of tactical data link information. It seems that this interface design specification is very useful in development process of the future weapon system.