• 산업경영시스템학회지
• /
• 제27권2호
• /
• pp.114-122
• /
• 2004

In statistical process control applications, variable sample size (VSS) $\bar{X}$ chart is often used to detect the assignable cause quickly. However, it is usually assumed that only one assignable cause results in the out-of-control in the process. In this paper, we propose the algorithm to minimize the function of cost per unit time and compare the economic design and the statistical design by use of the value of cost per unit time. We consider double assignable causes to occur with compound in the process and adopt the Markov chain approach to investigate the statistical properties of VSS $\bar{X}$ chart. A procedure that can calculate the control chart's parameters is proposed by the economic design.

• 대한전자공학회논문지
• /
• 제23권2호
• /
• pp.269-277
• /
• 1986

This paper proposes a new algorithmic state machine(ASM) chart and a new hardware description for automatic logic design of VLSI. To describe the behavioral characteristics of the design specification, the conventional ASM chart is modified, and a new hardware description language, SDL, is proposed. The SDL is one-to-one correspondent to the proposed ASM chart symbol, and can be used in a hierachical design of VLSI. As a design example, we obtain a logic circuit diagram of gate lebel utilizing a SDL hardware compiler after drawing an ASM chart and describing in SDL.

• 응용통계연구
• /
• 제25권3호
• /
• pp.465-470
• /
• 2012

EWMA(exponentially weighted moving average) charts and CUSUM(cumulative sum) charts are very effective to detect small shifts in the process mean. These charts have some control-chart parameters that allow the charts and be tuned and be more sensitive to certain shifts. The EWMA chart requires users to specify the value of a smoothing parameter, which can also be designed for the size of the mean shift. However, the size of the mean shift that occurs in applications is usually unknown and EWMA charts can perform poorly when the actual size of the mean shift is significantly different from the assumed size. In this paper, we propose the design procedure to find the optimal smoothing parameter of the EWMA chart when the size of the mean shift is unknown.

• 한국의류학회지
• /
• 제16권2호
• /
• pp.255-262
• /
• 1992

A computer simulation methiod for costume design has been developed using LUMENA, a generic-purpose 2-dimensional graphic software. In this study the palette, tone chart, fabric chart, styling chart, and costume drawing were constructed on the computer. In costume design simulation, fabric swatches with various colors and patterns were applied to the base garment image taken by using a scanner or a video camera. In this procedure the original 3-dimensional effect was fully retained. Using this simulation method, a number of costume designs could be carried out in short time without actually making the garment. A portfolio including the tone chart, fabric chart, styling chart, costume drawing, and simulation results were made for the purpose of demonstration, using the animation tools of LUMENA.

• 대한토목학회논문집
• /
• 제30권3B호
• /
• pp.315-324
• /
• 2010

본 논문에서는 대규모 유탄성 해석을 통해 초대형 부유식 해상구조물의 설계 차트를 개발했다. 초기 설계단계에 본 챠트를 이용해서 고비용의 유탄성 해석을 사용하지 않고도 초대형 부유식 해상구조물의 유탄성 거동을 예측이 가능하다. 본 논문에서는 두 가지 종류의 설계챠트 I, II을 개발하여 제시하였다. 설계차트 I은 특정 주파수의 파랑에 대한 구조물의 최대응력 응답진폭함수를 얻을 수 있도록 개발되었다. 설계차트 I의 경우 동일한 변장비와 무차원 구조강성계수를 갖는 모든 구조물에 적용이 가능하다. 설계챠트 I과 파랑스펙트럼의 적분을 통해 설계차트 II를 개발하였으며, Beaufort 풍력급에 따른 Bretschneider 스펙트럼을 적용해 해상의 환경요인을 고려하도록 구성되었다.

• 소성∙가공
• /
• 제15권7호
• /
• pp.496-503
• /
• 2006

The inner and outer car panels for bonnet, door, and trunk lid are assembled by hemming rather than welding. To achieve successful fabrication of these panels, the complicated timing chart of hemming units for pre-and main hemming stages should be made to optimal one. In this study, a design system for automatic timing chart generation is developed. Using AutoCAD VBA and EXCEL data chart, hemming die design parameters and guidelines were put into the program to give hemming unit drawings and consequent timing charts. Then the prepared timing charts were checked and modified. The effectiveness of the system is verified by applying it successfully to hemming unit design for bonnet panel joining.

• International Journal of Quality Innovation
• /
• 제2권1호
• /
• pp.69-86
• /
• 2001

The economic design of control charts has been researched for over four decades since Duncan proposed the concept in 1956. Few studies, however, have focused attention on the economic design of a moving average (MA) control chart. An MA control chart is more effective than the Shewhart chart in detecting small process shifts [9]. This paper provides an economic model for determining the optimal parameters of an MA control chart with multiple assignable causes and two failures in the production process. These parameters consist of the sample size, the spread of the control limit and the sampling interval. A numerical example is shown and the sensitivity analysis shows that the magnitude of shift, rate of occurrence of assignable causes and increasing cost when the process is out of control have a more significant effect on the loss cost, meaning that one should more carefully estimate these values when conducting an economic analysis.

• 한국경영과학회지
• /
• 제30권4호
• /
• pp.1-14
• /
• 2005

We propose a VSSI-CRL(Variable Sampling Size and Samplina Interval-Conforming Run length) synthetic control chart in order to improve the statistical characteristics of both the VSSI chart and the CRL synthetic chart. The VSSI-CRL chart utilizes VSSI sampling scheme, but it produces a signal only when the CRI is less than a given limit. An algorithm for calculating the ARL(Average Run length) and ATS(Average Time to Signal) of the VSSI-CRL chart is developed by employing Markov chain method. We present some lemmas for describing the statistical characteristics of the VSSI-CRL chart under in-control state. A procedure for designing the VSSI-CRL chart is proposed based on the lemmas. Extensive comparative studios show that the VSSI-CRL chart is superior to the CRL synthetic chart or the VSSI chart in general, and is comparable to the EWMA chart in ATS performance.

• 대한안전경영과학회지
• /
• 제14권3호
• /
• pp.167-174
• /
• 2012

In the manufacturing process the most widely used $\bar{X}$ chart has been applied to control the process mean. Also, Accelerated Life Test(ALT) is commonly used for efficient assurance of product life in development phases, which can be applied in production reliability acceptance test. When life data has lognormal distribution, through censored ALT design so that censored ALT data has asymptotic normal distribution, $ALT\bar{X}$ control chart integrating $\bar{X}$ chart and ALT procedure could be applied to control the mean of process in the manufacturing process. In the situation that process variation is controlled, $Z_p$ control chart is an effective method for the very small fraction nonconforming of quality characteristic. A simultaneous control scheme with $ALT\bar{X}$ control chart and $Z_p$ control chart is designed for the very small fraction nonconforming of product lifetime.

• 한국의류산업학회지
• /
• 제13권3호
• /
• pp.332-345
• /
• 2011

This research designed usable standard color chart which was planned by hue and tone color system. This research studied 5 types standard color chart by designed tone map and preceding research. "Basic Color Chart 14 Colors" was planned for kindergarteners. "Primary Color Chart 63 Colors" was planned for schoolboys. "Middle Grade Color Chart 114 Colors" was planned for junior high school students. "High Grade Color Chart 152 Colors" was planned for senior high school students. "Hue and Tone 205 Colors" was planned for university students and general publics. These 5 types standard color chart were produced the trial color coordinate card and attached the Munsell notation which could reappear the spare color paper when needed. These 5 types standard color chart would be offered the data base for efficient color coordinate education as school age.