• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권8호
• /
• pp.365-370
• /
• 2005

Microwave diagnostics have been widely utilized to measure the important parameters of high temperature and high density plasmas. Reflectometry is known as a promising microwave diagnostic which has a number of merits to measure electron density profiles. In the KSTAR device, X-mode FM reflectometry is planned to measure the plasma density profiles. FM reflectometry is required to extract phase information on raw mixer IF signals, thereby obtaining time-of-flight of reflectometry signals. It is known that the data analysis method is crucial to determine the performance of FM reflectometry In fact, there are several analysis programs which have been utilized in various FM systems. Since each program was developed for a specific device, however, it is difficult to directly apply it to a different reactor like the KSTAR device. It is necessary, therefore, to develop a data analysis program for the KSTAR FM reflectometry. In this paper, complex digital demodulation (CDM) and wavelet transformation are examined in terms of the performance of density profile reconstruction. For the comparison of both methods, FM reflectometry signals are generated on the basis of assumed profiles and the interaction of the X-mode wave and the plasma. In order to see how well both methods work under various conditions, three types of profiles are assumed and noise effects are included. As a result, both methods work well under the condition of gentle density gradient and small noise level. As density gradient becomes steeper and noise level gets higher. the reconstruction performance of wavelet is better than that of CDM.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2004년도 추계학술대회 논문집
• /
• pp.189-194
• /
• 2004

Owing to the mass-housing policies of high-density and high-rise, the residential environments in Korea have come to be uniform and monotonous. Nevertheless, the design competitions introduced for the first time in 1980s have Played significant roles in developing the fresh ideas and concepts in housing design. And in our country, the land of the gradient $0-9^{\circ}$ that is able to plan as level sites come up to 32.5% of the total land and the land of the gradient $10-29^{\circ}$that should be designed by considering the characteristics of the sloping sites is 53.2% of the whole. For that reason, the development of the apartment housing in the sloping site has been done largely to solve the issues associated with the scarcity of the land. Therefore, it is very meaningful job to see the various design methods on the basis of the characteristics of the sites, particularly gradient, by analyzing the prizewinners in the design competitions. In this context, the research analyzed the works that won the design competition after 1990, and organized the types of the block plans and the design characteristics applied in our residence housing. Secondarily, it classified that types by the gradient and analyzed statistically and compared the numerical value.

• 한국진공학회지
• /
• 제18권1호
• /
• pp.44-48
• /
• 2009

전기로에서 공급하는 열을 통해 주변 반응 기체와 기판이 열적 평형 상태를 이루고 있는 기존의 박막 성장 방식과 달리, 외부에서 주입시킨 공기를 이용하여 기판 홀더를 냉각시켜 기판과 기판 주변 반응 기체 사이에 온도 차이(temperature gradient)를 발생시키고, 그 온도 차이가 변함에 따라 사파이어 r-면 기판 위에 성장된 질화갈륨 나노 구조체의 구조적 특성이 어떻게 바뀌는지에 대한 연구를 수행하였다. 온도 차이의 크기에 따라 다족(multipod) 형태로 자란 나노 막대의 직경과 밀도, 그리고 길이가 변화함을 확인하였다. 또한, 동일한 온도 차이(temperature gradient)가 있더라도 기판 자체의 온도에 따라 나노막대 끝 단면의 모양이 변화됨을 발견하였다.

• 대한기계학회논문집A
• /
• 제30권3호
• /
• pp.249-259
• /
• 2006

Stress and displacement fields of a propagating Mode III crack in an orthotropic functionally gradient material (OFGM), which has (1) linear variation of shear modulus with a constant density, and (2) an exponential variation of shear modulus and density, are derived. The equations of motion in OFGM are developed and solution to the displacement and stress fields fer a propagating crack at constant speed though an asymptotic analysis. The stress terms associated with $\gamma^{-1/2}\;and\;\gamma^{0}$ are not affected by the FGM constant $\zeta$ which is nonhomogeneous parameter, only on the higher order terms, the influences of nonhomogeneity on the stress are explicitly brought out. When the FGM constant $\zeta\;is\;zero\;or\;\gamma{\rightarrow}0$, the fields for OFGM are almost same as the those for homogeneous orthotropic material. Using the stress components, the effects of nonhomogeneity on stress components are discussed.

• 한국수산과학회지
• /
• 제51권3호
• /
• pp.332-337
• /
• 2018

The Pacific cod Gadus macrocepahlus, lays demersal eggs and the hatching larvae rise toward the surface layer of the ocean to feed. The change in the specific gravity of eggs and larvae was investigated to examine their vertical distribution and movement in the water column. The specific gravities of fertilized eggs and various size classes of larvae were measured using a density gradient apparatus. In total, the instantaneous specific gravity of 146 eggs and 225 larvae were measured. To prevent any disturbance in the gradient water column due to larval movement, 0.004% MS222 was used for anesthesia. Due to their high specific gravity, eggs spawned were deposited over the sea-bed of the spawning ground. The specific gravity of hatching larvae decreased abruptly. However, Pacific cod larvae still had a comparatively high specific gravity at hatching ($1.03655{\pm}0.00146g/cm3$, n=4, mean SL=3.62 mm) and their specific gravities tended to decrease as they grew. The specific gravity stabilized 6 days after hatching ($1.02590{\pm}0.00212g/cm3$, n=15, mean SL=4.67 mm) and the cod larvae were eventually able to float in the water column.

• 소성∙가공
• /
• 제33권4호
• /
• pp.285-290
• /
• 2024

Electropulsing treatment (EPT) has been developed as an alternative to furnace heat treatment (FHT) to exploit its engineering advantages in rapidly annealing metallic materials. Conventionally, the separation of thermal and athermal effects of EPT has been attempted by comparing EPT and FHT specimens processed under identical temperature and duration. However, this method inherently introduces experimental and measurement errors. This study proposes a novel approach to distinguish the thermal and athermal effects of EPT-processed metals using T-shaped specimen with two observation points, namely 'C' and 'D'. For verification, the thermal gradient of T-shaped Mg alloys was examined under various EPT conditions. The points C exhibited higher temperatures compared to those at points D at a given electric current density, because only the former received both thermal and athermal effects. It was confirmed from twelve specimens that the point C at an electric current density of 65 A·mm^-2 and point D at 70 A·mm^-2 exhibited similar temperatures. This developed method is expected to reduce measurement errors in distinguishing thermal and athermal effects, thus providing a deeper understanding of their quantitative contributions in future studies.

• Journal of Welding and Joining
• /
• 제10권2호
• /
• pp.19-31
• /
• 1992

A numerical study was performed to investigate the flow field and the heat transfer characteristics occurring in high power density welding which is important in many fields of engineering applications. A two dimensional quasi-steady state of keyhole welding model is simulated by using the finite volume methods. It is shown that the shape of isothermal line is elliptic and the temperature gradient is very steep compared with other welding method and the welding speed has on welding width and observed beam power.

• 대한기계학회논문집B
• /
• 제39권6호
• /
• pp.513-518
• /
• 2015

농도차발전은 전 세계적으로 높은 잠재적 에너지량으로 인하여 최근 많은 주목을 받고 있다. 본 연구에서는 양이온과 음이온의 선택적 분리를 통하여 전기를 생성하는 역전기투석을 이용하여 다양한 농도 공급원의 조합으로부터 성능을 평가하였다. 역전기투석 장치의 분극곡선은 전류가 증가할 때 전압이 선형적으로 감소하였고, 최대출력밀도는 내부저항과 외부저항이 일치하는 부분에서 얻어졌다. 내부 유로두께가 감소하고 공급유량이 증가할 때 역전기투석 장치에서 생성되는 출력이 증가하는 것을 발견하였고, 공급유체의 펌핑에 의해 발생되는 출력 손실을 고려한 정미출력은 공급유량이 22.5mL/min 에서 최대값을 가졌다. 최종적으로 담수화 브라인, 해수, 강물, 폐수, 기수를 조합하여 역전기투석 장치의 성능을 평가하였고 정삼투 과정에서 발생하는 브라인과 강물을 이용할 때 $1.75W/m^2$ 으로 최대값을 얻었다.

• 대한기계학회논문집B
• /
• 제21권9호
• /
• pp.1165-1173
• /
• 1997

The steady state close-contact melting phenomenon occurring between a phase change material and an isothermally heated flat plate with relative motion is investigated analytically, in which the effects of vertical convection in the liquid film and solid-liquid density difference are incorporated simultaneously. Not only the scale analysis is conducted to estimate a priori qualitative dependence of system variables on characteristic parameters, but also an analytical solution to a set of simplified model equations is obtained to specify the effects under consideration. These two results are consistent with each other, in that the vertical convection affects both the solid descending velocity and the film thickness, and that the density difference alters only the solid descending velocity. While the effect of vertical convection can be characterized conveniently by a newly introduced temperature gradient factor which asymptotically approaches the unity/zero with decreasing/increasing the Stefan number, that of density difference is represented by the liquid-to-solid density ratio. It is shown that the solid descending velocity depends linearly on the density ratio, and that the ratios of solid descending velocity, film thickness and friction coefficient to the conduction solution are proportional to 3/4, 1/4 and -1/4 powers of the temperature gradient factor, respectively. Also, established is the fact that the effect of convection can be legitimately neglected in the analysis for the range of the Stefan number less than 0.1.

• 한국환경생태학회지
• /
• 제34권5호
• /
• pp.425-435
• /
• 2020

본 연구는 도심지 산지형 공원의 물리적 구조 및 식생구조가 기상에 미치는 영향을 분석하기 위해 물리적 구조인 표고, 경사도, 사면 향, 지형구조와 식생 구조인 현존식생, 흉고직경, 울폐도의 기상과의 평균비교를 실시하였다. 분석 결과, 표고의 경우 상대습도, 풍속, 일사에서 유형 간 차이가 있는 것으로 분석되었으며, 경사도의 경우 풍속을 제외한 모든 기상요소에서 유형 간 차이가 있는 것으로 분석되었다. 사면 향의 경우 기온과 상대습도에서 유형간 차이나 있는 것으로 분석되었다. 지형구조의 경우 계곡부, 사면부, 능선부로 구분하였으며, 상대습도에서 측정 값의 차이가 있는 것으로 분석되었으나 기온, 풍속, 일사량에서는 일정한 경향과 유형간 차이가 미미한 것으로 분석되었다. 식생구조 중 현존식생의 경우 일사량을 제외한 기온, 상대습도, 풍속 항목에서 유형 간 차이가 있는 것으로 분석되었으며, 흉고직경의 경우 기온, 풍속, 일사량 항목에서 유형 간 유의한 차이가 있는 것으로 분석되었다. 울폐도의 경우 기온과 일사량에서 유의한 차이가 있는 것으로 분석되었다. 식생 및 물리적구조가 기상환경에 미치는 영향 분석을 위한 관계분석결과 기온의 경우 경사도와 사면 향, 흉고직경과 울폐도에서 영향을 받는 것으로 분석되었으며, 상대습도의 경우 물리적구조인 표고, 경사도, 사면 향, 지형구조와 식생구조인 현존식생과 울폐도에서 상관성이 분석되었다. 풍속의 경우 표고, 현존식생, 흉고직경에서 상관성이 분석되었으며, 일사량의 경우 경사도와 흉고직경, 울폐도간의 상관성이 분석되었다. 전반적으로 기온과 상대습도, 일사량에 가장 큰 영향을 주는 인자는 울폐도로 분석되었으며, 다음으로 경사도에서 상관관계가 높게 분석되는 경향이 나타났다. 흉고직경 또한 기온과 일사량간의 상관성이 매우 높은 것으로 분석되었으며 풍속과의 상관관계도 나타났으나 상대습도는 통계적인 유의성이 나타나지 않았다.