• 한국전자통신학회논문지
• /
• 제14권2호
• /
• pp.309-316
• /
• 2019

본 논문은 로컬 클록 왜곡을 보상하는 낮은 지터 성능의 지연 고정 루프를 제시한다. 제안된 DLL은 위상 스플리터, 위상 검출기(PD), 차지 펌프, 바이어스 생성기, 전압 제어 지연 라인(Voltage Controlled Delay Line) 및 레벨 변환기로 구성된다. VCDL(: Voltage Controlled Delay Line)은 CML(: Current Mode Logic)을 사용하는 자체 바이어스 지연 셀을 사용하여 온도에 민감하지 않고 잡음을 공급한다. 위상 스플리터는 VCDL의 차동 입력으로 사용되는 두 개의 기준 클록을 생성한다. 제안된 회로의 PD는 CML에 비해 적은 전력을 소비하는 CMOS 로직을 사용하기 때문에 PD는 위상 스플리터의 유일한 단일 클록을 사용한다. 따라서 VCDL의 출력은 로컬 클록 분배 회로뿐만 아니라 PD에 사용되므로 레벨 변환기에 의해 레일-투-레일 신호로 변환된다. 제안된 회로는 $0.13{\mu}m\;CMOS$ 공정으로 설계되었으며, 주파수가 1GHz인 클록이 외부에서 인가된다. 약 19 사이클 후에 제안된 DLL은 잠금이 되며, 클록의 지터는 1.05ps이다.

• 한국항행학회논문지
• /
• 제25권5호
• /
• pp.320-326
• /
• 2021

항공사에서 정시성(on-time performance, OTP)이란, 항공사의 신뢰성의 척도이며, 타 항공사와 비교할 때 중요한 지표로 활용된다. 본 연구는 코로나로 인해 항공 편수가 급격히 줄어든 2020년 3월을 기준으로 전후 1년간의 국내 K항공사 자료를 분석하여 지연 요인들이 항공사의 정시성에 미치는 영향 및 강도를 분석하였다. 또한, 계절에 따른 기상 영향으로 발생되는 지연을 분석하였으며, 코로나 상황으로 급감한 승객이 지연요인에 어떠한 영향을 주는지 연구하였다. 지연 요인(delay factor)은 IATA의 지연 코드(delay code)에 자체 코드를 추가한 K 항공사의 지연 코드를 적용하였다. 본 연구의 분석을 바탕으로 항공사의 정시성에 영향을 주는 지연 요인을 최소화하는 방안을 제안하고자 한다.

• 한국음향학회지
• /
• 제14권3호
• /
• pp.28-36
• /
• 1995

본 논문에서는 능동소음제어를 위하여 망각형 지연 LMS(least mean square) 알고리듬을 이용한 이중루프제어 모델을 제안하였다. 제안한 이중루푸제어 모델은 계산양을 줄이기 위해 이득과 음향시간지연인자를 이용하여 온라인으로 라우드스피커 특성 및 오차음경로를 추정한다. 이중루프구조를 통한 오차신호의 제어는 보다 견실한 제어시스템이 된다. 음향시간지연을 추정하기 위한 필터의 입력신호는 입력 마이크로폰 신호와 적응필터의 차를 사용한다. 망각형 지연 LMS 알고리듬은 비정상상태에서 계수들의 발산을 방지하기 위해 사용한다. 실제 소음신호에 대하여 제안한 이중루프제어 모델은 소음레벨이 평균 12.9dB정도 감쇠되었다.

• Journal of Communications and Networks
• /
• 제10권3호
• /
• pp.351-361
• /
• 2008

This paper presents a delay-margin based traffic engineering (TE) approach to provide end-to-end quality of service (QoS) in multi-protocol label switching (MPLS) networks using differentiated services (DiffServ) at the link level. The TE, including delay, class, and route assignments, is formulated as a nonlinear optimization problem reflecting the inter-class and inter-link dependency introduced by DiffServ and end-to-end QoS requirements. Three algorithms are used to provide a solution to the problem: The first two, centralized offline route configuration and link-class delay assignment, operate in the convex areas of the feasible region to consecutively reduce the objective function using a per-link per-class decomposition of the objective function gradient. The third one is a heuristic that promotes/demotes connections at different links in order to deal with concave areas that may be produced by a trunk route usage of more than one class on a given link. Approximations of the three algorithms suitable for on-line distributed TE operation are also derived. Simulation is used to show that proposed approach can increase the number of users while maintaining end-to-end QoS requirements.

• 한국통신학회논문지
• /
• 제21권1호
• /
• pp.241-250
• /
• 1996

In this work, an improved architecture of two-dimensional digital filter(2D DF) is suggested, and then the filter is simulated by C, VHDL language and related layouts are designed by Berkeley CAD tools. The 2D DF consists of one-dimensional digital filters and delay lines. For one-dimensional digital filter(1D DF) case, once filter coefficients are represented by canonical signed digit formats, multiplications are exected by hardwired-shifting methods. The related bit numbers are handled to prevent picture quality degradation and pipelined adder architectures are adopted in each tap and output stage to speed up the filter. For delay line case, line-sharing DRAM is adopted to improve power dissipation and speed. The filter layout is designed by semi/full custom methods considering regularity and speed improvement, and normal operation is confirmed by simulation.

• ETRI Journal
• /
• 제34권6호
• /
• pp.946-949
• /
• 2012

We present the optimization of a birefringence-enhanced-waveguide (BWG)-based polarization beam splitter (PBS) in a Mach-Zehnder interferometer (MZI) configuration and analyze the structure-dependent or polarization-dependent phase difference, using a delay-line MZI (DL-MZI). We fabricate the DL-MZI using silica-based planar lightwave circuit technology and, using the DL-MZI, demonstrate the ability to optimize a PBS by measuring the birefringence of the BWG and structure-dependent phase offset.

• 제어로봇시스템학회논문지
• /
• 제10권3호
• /
• pp.239-248
• /
• 2004

Optical coherence tomography(OCT) is high resolution imaging system which can see the cross section of microscopic organs in the living tissue. In this paper, we analyze the relation between the light source and the resolution of modulated signal in Michelson interferometer. We construct 1-D OCT signal processing hardware such as amplifiers, filters, and demodulate electronic signals from the photo detector. In order to get 2-D OCT image, the synchronization among optical delay line, sample stage and A/D converter is dealt with. In experiments, we verify analog and digital signal processing blocks which apply to the stacks of glasses. Finally we aquire high resolution 2-D OCT image with respect to the onion tissue. We expect that this result can be applied to the medical instrument through performance improvement.

• 제어로봇시스템학회논문지
• /
• 제21권4호
• /
• pp.315-320
• /
• 2015

This paper describes the implemenation of localization and visualization scheme to find out an ultrasonic source caused by defects of a power distribution line equipment. To increase the fault detection performance, $2{\times}4$ sensor array is configured with MEMS ultrasonic sensors, and from the sensor signals aquired, the azimuth and elevation angles of the ultrasonic source is estimated based on the delay-sum beam forming method. Also, to visualize the estimated location, it is marked on the background image. Experimental results show applicability of the present technique.

• International Journal of Internet, Broadcasting and Communication
• /
• 제4권1호
• /
• pp.18-22
• /
• 2012

In this paper, we propose an equivalent Wiener-Hopf equation. The proposed algorithm can obtain the weight vector of a TDL(tapped-delay-line) filter and the error simultaneously if the inputs are orthogonal to each other. The equivalent Wiener-Hopf equation was analyzed theoretically based on the MMSE(minimum mean square error) method. The results present that the proposed algorithm is equivalent to original Wiener-Hopf equation. In conclusion, our method can find the coefficient of the TDL (tapped-delay-line) filter where a lattice filter is used, and also when the process of Gram-Schmidt orthogonalization is used. Furthermore, a new cost function is suggested which may facilitate research in the adaptive signal processing area.

• 센서학회지
• /
• 제21권6호
• /
• pp.408-412
• /
• 2012

An in-line dispersive delay line (DDL) demands low and controllable reflectivity of the reflectors, especially if the surface acoustic wave (SAW) propagates all the way along the reflecting structure. The metal reflectors are usually too strong and introduce too much attenuation in such a device. The proposed solution of this problem is to spatially separate the acoustic channels for different frequencies with the help of Fan-shaped Transducers (FIDT) and to use narrow open metal reflectors to reduce reflectivity. Special arrangement of FIDT is performed to use 180-deg. reflection of the SAW. Narrow open metal strips with a metallisation ratio of the order of 20% are used as reflectors with small and controllable reflectivity. Reflectivity of such strips is estimated both theoretically and experimentally. Experimental performance of the proposed DDL is presented.