• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.3
• /
• pp.286-292
• /
• 2010

In this paper, we investigate the relationship between the performance of telerobotic systems and the two independent time-delay on different modality, which are haptic and video. Especially, we try to find some performance improvement when the amount of delay of haptic and video is synchronized. Experiments were conducted with 10 subjects by scanning the amount of video and haptic delay independently. It is rather interesting to note that the teleoperation performance was not that sensitive to video delay, and the synchronized video and haptic delay doesn't show better performance than the case when haptic delay is lower than video delay.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.540-545
• /
• 2004

This article describes the time delay control of the 3-dimensional motion of the container cranes used in dockside container terminals. The container is suspended by four flexible cables via spreader, and due to the disturbances such as the wind and acceleration of cranes, the container undergoes translational(sway) and rotational position errors. And due to the uncertainty of weight and rotational inertia, accurate position control of container crane is difficult to realize. This paper, based on the analysis of 3-dimensional dynamics of container moving systems, develops time delay control algorithm [1]. The developed control algorithm is shown effective in controlling the container position in the presence of gust and parameter uncertainties.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.3
• /
• pp.196-203
• /
• 2003

Recent increase in accessibility to the internet makes it easy to use the internet-connected devices. The internet could allow any user can reach and command any device that is connected to the network. But these teleoperation systems using the internet connected device have several problems such as the network time delay, data loss and development cost of an application for the communication with each other. One feasible solution is to use local and external network line for the network time delay, transmission control protocol for data loss and Java language to reduce the development period and cost. In this study, web-based remote control system using Java language is newly proposed and implemented to a pneumatic servo control system to solve the time delay, data loss and development cost. We have conducted several experiments using pneumatic rodless cylinder through the internet and verified that the proposed remote control system was very effective.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.501-501
• /
• 2000

In this paper, the theoretical development to stabilize a class of uncertain time-delay systems via sliding mode control is presented. The system under consideration is described in state space model containing state delay, uncertain parameters and disturbance. The main idea is to reduce the state of delayed system, by employing the generalize linear transformation, into an equivalent one with no delay inside, which is easier to analyze its behavior and stability. Then, the sliding control approach is employed to find the stabilizing control law. Finally, a numerical simulation is illustrated to show the algorithm for applying the proposed theorems and the efffetiveness of the designed control law in stabilizing the controlled systems.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2089-2092
• /
• 2002

The PID controller have the simple structure and show the comparatively good control performance. Crystal Grower(FF-CZ150) melt polycrystalline silicon at the temperature of about 1450$^{\circ}C$, then grow it into a single crystalline ingot. The automatic diameter control system of the Crystal Grower has a good performance with only PD control. But it contain the integrator in the plant which has a long time delay. In this paper, we show the secondary approximate model and applies time delay controller which has good performance for the plant with long time delay. It will be able to improve the response characteristic against a standard input and a load disturbance.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.1-7
• /
• 2018

Humanoid robots have fascinated many researchers since they appeared decades ago. For the requirement of both accurate tracking control and the safety of physical human-robot interaction, torque control is basically desirable for humanoid robots. Humanoid robots are highly nonlinear, coupled, complex systems, accordingly the calculation of robot model is difficult and even impossible if precise model of the humanoid robots are unknown. Therefore, it is difficult to control using traditional model-based techniques. To realize model-free torque control, time-delay control (TDC) for humanoid robot was proposed with time-delay estimation technique. Using optimal walking trajectory obtained by particle swarm optimization, TDC with proposed scheme is implemented on whole body of a humanoid, not on biped legs even though it is performed by a virtual humanoid robot. The simulation results show the validity of the proposed TDC for humanoid robots.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.5-10
• /
• 2005

We deal with the sliding mode control using the time delay estimation. The time delay estimation is able to weaken the need for obtaining a quantitative plant model analogous to the real plant so the sliding mode control with a time delay estimation (SMCTE) is very suitable for plant such as SMA actuators whose quantitative model is difficult to obtain. We have already studied the application of the time delay control (TDC) to SMA actuators in other literature. Based on the previous study on the TDC, we developed the gain tuning method for the SMCTE, which results were nearly the same as the TDC. With respect to the step response, the SMCTE proved its predominance in a comparison with other control schemes such as the PID control and the relay control. As well as the contribution of the above control methodology, the model identification for SMA actuators has also been studied. The dynamics for an SMA actuator was newly derived using the modified Liang's model. The derived dynamics showed a continuity at the change of the phase transformation process but the original Liang's model could not.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.52.1-52
• /
• 2002

Young Sam Lee : He is currently a PhD candidate student. His research interest includes time-delay systems, signal processing, and receding horizon control. Wook Hyun Kwon : His research interest includes time-delay systems, signal processing, receding horizon control, and robust control. He is the president of IFAC 2008 which is to be held in Korea. Soo Hee Han : He is currently a PhD candidate student. His research interest includes time-delay systems, signal processing, receding horizon control, and communication.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.23-23
• /
• 2000

In this paper, we proposed the problems of robust stability and 개bust H$_{\infty}$ control of discrete time-delay linear st.stems with Frobenius norm-bounded uncertainties. The existence condition and the design method of robust H$_{\infty}$ state feedback control]or are given. Through some changes of variables and Schur complement, the obtained sufficient condition can be rewritten as an LMI(linear matrix inequality) form in terms of all variables.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.3-3
• /
• 2000

Limit cycle analysis of attitude control system using gas jet thrusters is performed. Schmitt-Trigger and PD control laws are applied and solenoid valve time delay is considered. Phase plane method is used for calculation of characteristics of limit cycle. Important characteristics of resultant limit cycle such as frequency, amplitude, maximum rate, and duty ratio could be expressed analytically by proposed method.