• KIISE Transactions on Computing Practices
• /
• v.20 no.12
• /
• pp.694-699
• /
• 2014

In mobile ad-hoc networks (MANET), the network topology and neighboring nodes change frequently, since MANET is composed of nodes that have mobility without a fixed network infrastructure. The AODV routing protocol is advantageous for MANET, but AODV has a delay in the transmission of data packets because AODV can not transmit data during route recovery. This paper proposes solving the above problem of AODV by using a bypass generation mechanism for data transmission during route recovery. For further improvement, additional mechanisms that coordinate the reception threshold of a hello packet are proposed in order to improve the accuracy of the information obtained from the neighboring nodes when the bypass is generated due to a link failure and the immediacy of the route recovery. Simulation results show that the proposed technique improves the performance in terms of the delay in transmission compared to traditional AODV.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.7
• /
• pp.550-557
• /
• 2017

Ionospheric delay, which affect the accuracy of GNSS positioning, is generated by electrons in Ionosphere. Solar activity level, region and time could make change of this delay level. Dual frequency receiver could effectively eliminate the delay using difference of refractive index between L1 to L2 frequency. But, Single frequency receiver have to use limited correction such as ionospheric model in standalone GNSS or PRC(pseudorange correction) in Differential GNSS. Generally, these corrections is effective in normal condition. but, they might be useless, when TEC(total electron content) extremely increase in local area. In this paper, monitoring algorithm is proposed for local ionospheric anomaly using multiple reference stations. For verification, the algorithm was performed with specific measurement data in Ionospheric storm day (20. Nov. 2003). this algorithm would detect local ionospheric anomaly and improve reliability of ionospheric corrections for standalone receiver.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.41
• /
• pp.135-165
• /
• 2009

It is not difficult to understand from laws and practices in arbitration area that arbitrators appointed have as many rights as their duties to do their performing duties especially to participate in the proceeding and deliberations of the arbitral process. However, sometimes can be happened that an arbitrator who was appointed by a party, refuses to participate in the proceeding or resign during the arbitral process. Generally, in the case, it is provided that the arbitrator who fails to act can be replaced by a substitute arbitrator. When it is decided to change an arbitrator, the appointment of an substitute arbitrator is likely to cause time delay, high cost with inconvenience. And also it is to be considered for additional cost and delay from possible need for repeating the hearings that were held at former arbitral tribunal. Sometimes, a party want to delay intentionally the arbitration process by using right for challenging arbitrator or designing with an arbitrator who was appointed by the party. That is why the reason it has been discussed for allowing the truncated tribunal that the remaining arbitrators that is named as truncated tribunal are permitted to complete the proceeding and issue decisions or arbitral awards. Unfortunately there are uncertain views on the validity of arbitral proceeding or recognitions and enforcement of truncated tribunal decisions in international commercial arbitration. In this article it is focusing on discussing truncated tribunal's benefits or barriers and problems through comparing with famous arbitral rules of international arbitral institutes including rules of UNCITRAL, LCIA, KCAB and the revising draft arbitration rule of UNCITRAL.

• International Journal of Highway Engineering
• /
• v.8 no.2 s.28
• /
• pp.75-85
• /
• 2006

Currently, cross-section design can not reflect highway function and traffic volume, various construction. This research paper provides analysis of traffic accident type, improvement of traffic operation and safety, assessment for new cross-section standards of two-lane highway. Research show higher accident rate on 6$\sim$8.9m road than 9$\sim$12.9m road width in two-lane highway. Typical improvement is widening on lane and shoulder width. Simulation show large increase on 6$\sim$7m road delay-time in 1,200vph. In contrast 10$\sim$11.5m road shows slight change on delay-time. This research paper provides various cross-section construction by traffic volume in minor arterial and distributor two-lane highway. The new cross-section design provides adopting highway volume, various construction and flexibility.

• Journal of Radiation Protection and Research
• /
• v.29 no.2
• /
• pp.91-96
• /
• 2004

A practical methodology for the determination of derived intervention levels (DILs) on relocation following an accidental release of radionuclides was designed based on dose rate on the ground. The influence of DILs was investigated with respect to the change of parameter values, which are dependent on socio-environmental characteristics in distinction from temporary and permanent relocations. The DILs on relocation showed a distinct difference depending on effective removal half-life of radionuclides following a deposition, delay time in measurement and residential characteristics. In particular, the delay time. In measurement was an important factor in determination of DILs in the case of an assumption that dose rate on the ground declines in a power function, not in an exponential function. The DILs showed lower numerical values as longer effective half-life, longer delay time In measurement and longer exposure time.

• Journal of IKEEE
• /
• v.18 no.2
• /
• pp.192-197
• /
• 2014

In this paper, $3^{rd}$ SDM with FDPA(Feedback Delay Pass Addition) technique to improve the input range is proposed. Conventional architecture with $3^{rd}$ transfer function is just made as adding a digital delay path in $2^{nd}$ SDM architecture. But the input range is very small because feedback path into the first integrator is increased. But, proposed architecture change feedback path into the first integrator to the second integrator, so input range could be improved about 9dB. The $3^{rd}$ SC SDM with only one operational amplifier was implemented using double-sampling technique. Simulation results for the proposed SDM designed in $0.18{\mu}m$ CMOS technology with power supply voltage 1.8V, signal bandwidth 20KHz and audible sampling frequency 2.8224MHz show SNR(Signal to Noise Ratio) of 83.8dB, the power consumption of $700{\mu}W$ and Dynamic Range of 82.8dB.

• Journal of the Korea Institute of Building Construction
• /
• v.2 no.4
• /
• pp.169-176
• /
• 2002

To study of binder and fine aggregate a lot of replacement fly-ash concrete, initial characteristics, standard environment of curing temperature $20^{\circ}C$, hot-weather environment, cold weather environment of curing temperature $5^{\circ}C$. Flash concrete tested slump, air contest, setting and Hardening concrete valuated setting period of form, day of age 3, 7, 28 compression strength in sealing curing. Underwater curing specimen compression strength of age 3. 7, 28day used strength change accordingly fly-ash concrete curing temperature. Purpose of study is consultation materials in field that variety of fly-ash replacement concrete mix proportion comparison and valuation. (1) Setting test result, fly-ash ratio of replacement higher delay totting time. Same volume of fly-ash ratio of replacement is lower fly-ash ratio of replacement fine aggregate delay setting time. Setting test in curing temperature $35^{\circ}C$ over twice fast setting in curing temperature $20^{\circ}C$ and all specimen setting delay in curing temperature $5^{\circ}C$. F40 specimen end of setting about 30 time. (2) Experiment result age 28day compression strength more fisher plan concrete then standard environment in curing temperature $20^{\circ}C$, cold weather environment in curing temperature $5^{\circ}C$, most strength F43 is hot-weather environment in curing temperature $35^{\circ}C$ replacement binder 25%, fine aggregate 15%. (3) Hot-weather environment replacement a mount of fly-ash is a same of plan concrete setting period of form. Age 28day compression strength replacement a mount of fly-ash more hot-weather concrete then plan concrete.

• The KIPS Transactions:PartC
• /
• v.18C no.6
• /
• pp.433-440
• /
• 2011

In this paper, we propose a new scheduling method that can guarantee reliable jitter by minimizing the queue length variation in the streaming service provisioning such as IPTV and VoD. The amount of traffic to be delivered within a certain time is very fluid because MPEG-4 and H.264 encoders use VBR(Variable Bit Rate) for delivering video streaming traffic. This VBR characteristic increases the end-to-end propagation delay variation when existing scheduling methods are used for delivering video frames. Therefore, we propose the new scheduling method that can minimize change rate of queue length by adaptively controling service rate taking into account the size of bulk incoming packets and arrival rate for bulk streaming traffic. Video frames can be more reliably transmitted through the minimization of the queue length variation using the proposed method. We use the queueing model and also carry out OPNET simulation to validate the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.26 no.1
• /
• pp.42-47
• /
• 2007

In this paper. we have studied improvement in sensitivity by increasing the frequency of SAW sensors for detecting the immobilization and hybridization of DNA. The sensor consists of twin SAW delay lines operating at 200MHz, a sensing channel and a reference channel. fabricated on $36^{\circ}$ rotated Y-cut X-propagation $LiTaO_3$ crystals. The optimum concentration of probe and target DNA was decided for the improvement of detection mechanism. and digital syringe pump system was used to reduce the human errors. The hybridization between immobilized probe DNA and target DNA on the gold-coated delay line results in mass loading on the delay line of the sensing channel. Thus, the relative frequency change was monitored in relation to the mass loading. The measurement results showed a good response of the sensor to the DNA hybridization with a maximum sensitivity level up to 0.066ng/m1/Hz.

• Journal of Korea Multimedia Society
• /
• v.4 no.4
• /
• pp.349-355
• /
• 2001

In this paper, we newly propose a performance enhanced CSMA/CD MAC(Medium Access Control) protocol for the Ethernet which changes its operation mode dynamically according to the network status, not fixed it as one of p-persistent mode and non-persistent mode. Dynamic mode change occurs independently on each node, and uses the consecutive success count and the fail count of the frame transmission. The simulation result shows that the dynamic mode change maintains the enhanced network utilization and transmission delay characteristics. Also we show the implementation simplicity of our MAC protocol through its conceptual design using the Ethernet commercial chip as it stands.