• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2003.04a
• /
• pp.79-85
• /
• 2003

One of unique characteristics of guided waves is a dispersive behavior that guided wave velocity changes with an excitation frequency and mode. In practical applications of guided wave techniques, it is very important to identify propagating modes in a time-domain waveform for determination of defect location and size. Mode identification can be done by measurement of group velocity in a time-domain waveform. Thus, it is preferred to generate a single or less dispersive mode But in many cases, it is difficult to distinguish a mode clearly in a time-domain waveform because of superposition of multi modes and mode conversion phenomena. Time-frequency analysis is used as efficient methods to identify modes by presenting wave energy distribution in a time-frequency. In this study, experimental guided wave mode identification is carried out in a steel plate using time-frequency analysis methods such as wavelet transform. The results are compared with theoretically calculated group velocity dispersion curves. The results are in good agreement with analytical predictions and show the effectiveness of using the wavelet transform method to identify and measure the amplitudes of individual guided wave modes.

• Archives of Reconstructive Microsurgery
• /
• v.6 no.1
• /
• pp.103-110
• /
• 1997

Since R.Y. Song(1982) has reported anatomic studies about septocutaneous perforator flap, various experiences especially on thigh flaps pedicled on septocutaneous artery were reported. Baek(1983) reported an anatomic study through the cadavers dissections on medial, lateral thigh area and provided the first new cutaneous free flap of thigh for clinical use. Song, et a1.(1984) reported anterolateral thigh free flap, Koshima, et al.(1989) reported pedicle variations and its versatile clinical usages. According to their reports, accessory branches of lateral femoral circumflex artery are placed in comparatively constant location and proved to be the effective pedicle of this flap. The advantages of anterolateral thigh free flap are 1) comparatively thin 2) can obtain sufficiently large flap 3) can contain cutaneous nerve 4) can be easy to approach anatomically because pedicle is located in comparatively constant position 5) minimal donor site morbidity. We report the experience of 10 cases of anterolateral thigh free flap coverage for soft tissue defects: 4 cases of soft tissue defects on foot area, 2 cases of soft tissue defects on hand, 3 cases of partial tongue defects owing to tongue cancer ablation, and 1 case of soft tissue defect on nasal alar.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.39 no.12
• /
• pp.1022-1032
• /
• 2002

A multibit DRAM BIST methodology reducing redundancy programming overhead has been proposed. It is capable of counting and locating faulty bits simultaneously with the test. If DRAM cells are composed of n blocks generally, the proposed BIST can detect the state of no error, the location of faulty bit block if there is one error and the existence of errors in more than two blocks, which are n + 2 states totally, with only n comparators and an 3 state encoder. Based on the proposed BIST methodology, the testing scheme which can detect the number and locations of faulty bits with the errors in two or more blocks, can be easily implemented. Based on performance evaluation, the test and redundancy programming time of 64MEG DRAM with 8 blocks is reduced by 1/750 times with 0.115% circuit overhead.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.1093-1101
• /
• 2015

Partial Discharge (PD) is a physical phenomenon, which causes defects and damages to the insulation. This phenomenon is regarded as the most important source of fault and defect in power transformers. Therefore, methods of high speed and precision are considered of special importance for the maintenance of transformers in localization of the origin of partial discharge. In this paper, the transformer winding is first modeled in a transient state by using RLC ladder network and multiconductor transmission line (MTL) models. The parameters of the two models were calculated by Ansoft Maxwell software, and the simulations were performed by Matlab software. Then, the PD pulses were applied to the models with different widths of pulses. With regard to the fact that the signals received after the application of PD had a variable frequency nature over time, and based on the wavelet transform and signal energy, a new method was presented for the localization of PD. Ultimately; the mentioned method was implemented on a 20 kV winding distribution transformer. Then, the performances of the models used in this paper, including RLC and MTL models, were compared in different frequency bands for the correct distinction of partial discharge location.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.281-286
• /
• 2008

Wall thinning defect due to flow accelerated corrosion is one of major aging phenomena in most power plant industries, and it results in reducing load carrying capacity of the piping systems. A failure testing system was set up for real scale elbows containing various simulated wall thinning defects, and monotonic in-plane bending tests were performed under internal pressure to find out the failure behavior of thinned elbows. Various finite element models were generated and analysed to figure out and simulate the behavior for other thinning shapes and loading conditions. This paper presents the decreasing trends of load carrying capacity according to the thinning dimensions which were revealed from the investigation of finite element analysis results. A mechanical integrity evaluation model for thinned elbows was proposed, also. This model can be used to calculate the TES plastic load of thinned elbows for general internal pressure, thinning location, and in-plane bending direction.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.2
• /
• pp.109-115
• /
• 2015

Odontoma is the most common odontogenic benign tumor, and the treatment of choice is generally surgical removal. After excision, bone grafts may be necessary depending on the need for further treatment, or the size and location of the odontoma. Although the osteogenic capacity of a demineralized tooth was verified as early as 1967 by Urist and many other investigators, the cumbersome procedure, including a long demineralization time, may be less than comfortable for clinicians. A modified ultrasonic technology, with periodic negative pressure and temperature control, facilitated rapid and aseptic preparation of demineralized teeth for bone grafts. This approach reduces the demineralization time dramatically (${\leq}80$ minutes), so that the graft material can be prepared chairside on the same day as the extraction. The purpose of this article is to describe two cases of large compound odonotomas used as graft material prepared chairside for enucleation-induced bony defects. These two clinical cases showed favorable wound healing without complications, and good bony support for future dental implants or orthodontic treatment. Finally, this report will suggest the possibility of recycling the benign pathologic hard tissue as an alternative treatment option for conventional bone grafts in clinics.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.11
• /
• pp.996-1000
• /
• 2005

Experimental results are presented for the degradation of 3 nm-thick gate oxide $(SiO_2)$ under both Negative-bias Temperature Instability (NBTI) and Hot-carrier-induced (HCI) stresses using P and NMOSFETS, The devices are annealed with hydrogen or deuterium gas at high-pressure $(1\~5\;atm.)$ to introduce higher concentration in the gate oxide. Both interface trap and oxide bulk trap are found to dominate the reliability of gate oxide during electrical stress. The degradation mechanism depends on the condition of electrical stress that could change the location of damage area in the gate oxide. It was found the trap generation in the gate oxide film is mainly related to the breakage of Si-H bonds in the interface or the bulk area. We suggest that deuterium bonds in $SiO_2$ film are effective in suppressing the generation of traps related to the energetic hot carriers.

• Journal of Chest Surgery
• /
• v.29 no.5
• /
• pp.585-588
• /
• 1996

We experienced a case of upper esophageal leiomyoma successfully excised by thoracoscopic surgery. A 29-year-old male was presented with retrosternal discomfort and mild dysphagia and an esophagogram revealed smooth fElling defect In the upper third of the intrathor cic esophagus, and esophagoscopy showed a submucosal tumor without mucosal infiltration. Chest CT and MRI were performed to confirm size, character and location of the esophageal mass, the absence of infiltration of surrounding structures, and to define mediastinal Iymphadenopathy. The tumor was excised by thoracoscopic surgery and it was diagnosed as leiomyoma (4$\times$2xlcm in size). The postoperative course was uneventful.

• Journal of Korean Foot and Ankle Society
• /
• v.23 no.4
• /
• pp.208-211
• /
• 2019

Diabetic foot ulcers can progress to the point where amputation is needed, and so these ulcers require active treatment. Skin grafts or flaps can be performed for coverage of this type of ulcer. Local flap surgery is relatively easy to perform and good results have been previously reported. We performed single-lobed rotation flap on 5 cases of forefoot ulcer around the site of weight bearing. The location of the foot ulcers was the medial part of the first metatarsophalangeal joint in all the patients. The mean size of the defect was 4.70 ㎠. Managing of ulcers, controlling of diabetes and infection, and improving of peripheral blood flow were performed before surgery. In two cases, infection progressed to the articular cartilage and so metatarsophalangeal joint fusions were performed simultaneously. All the cases were completely transplanted. There was no recurrence of the ulcers, and all the patients were able to walk.

• Journal of Korean Foot and Ankle Society
• /
• v.18 no.4
• /
• pp.222-226
• /
• 2014

Four patients with soft tissue defects around the ankle joint were covered with peroneal artery perforator-based propeller flaps. Using color Doppler sonography, the flap was designed by considering the location of the perforator and soft tissue defects. The procedure was then performed by rotating the flap by $180^{\circ}$. Additional skin graft was required in a patient due to partial necrosis, and delayed wound repair was performed in another patient with poor blood circulation at the distal part of the flap. The remaining patients did not have any complications and results were considered excellent. Good outcomes were eventually obtained for all patients.