• Textile Coloration and Finishing
• /
• v.8 no.5
• /
• pp.7-16
• /
• 1996

The air-flow dyeing machine is a new type of dyeing machine. Which is an energy saving type to be able to dye the fabrics with the lowest liquor ratio and in shorter time. This machine is operated with an aerodynamic system rather than a hyd raulic system for traditional jet or overflow dyeing. An air-flow dyeing machine(Green-flow) by the use of aerodynamic technology was developed and compared with the Luft-roto machine made by Thies Company, Germany, in this study. Three samples were dyed with both machines under the same dyeing conditions and color fastness, dyeing levelness, drapability, and mechanical properties of these samples were compared. The results were as follows; Both machines have almost the same dyeability. The dyeability was good at liquor ratio of 1: 3.5 and the speed of 450yds/min. The order for drapability was Crepe de Chine > Cool Peach > Charmeuse. Except for the color fastness of sublimation being below class 4, most color fastness of samples dyed with Green-flow m/c were above class 4. The maximum speed was 510yds/min. for Crepe de Chine and the standard deviation of K/S value was lower for Charmeuse and Cool Peach when employed on the "Green-flow" machine and lower for Crepe de Chine when employed on the Luft-roto machine. Comparing with dyeing of the Green-flow machine and that of the Luft-roto machine, the RT of the Charmeuse was found to be higher with the Green-flow machine and thus the sample had an improved wrinkle recovery. LT and WT of Cool Peach were higher, and shear properties(G, 2HG, 2HGS) of Crepe de Chine were higher, both turning out as suitable for clothing. clothing.

• Journal of Korea Foundry Society
• /
• v.43 no.1
• /
• pp.43-49
• /
• 2023

• Journal of Forest and Environmental Science
• /
• v.33 no.2
• /
• pp.79-90
• /
• 2017

Improving the urban environmental quality relies mainly on the increasing of urban forests capacity to store carbon dioxide. This study assesses the floristic diversity of urban institutional lands in Bukavu and their potential to reduce atmospheric $CO_2$. An exhaustive inventory over three sites ($Coll{\grave{e}}ge$ Alfajiri, $Cath{\acute{e}}drale$ Notre-Dame de la Paix and Institut $Sup{\acute{e}}rieur$ $P{\acute{e}}dagogique$) of Bukavu led to the identification of 1,113 trees of which the diameter at breast height (1.30 m) ranged from 4.9 to 161 cm. Results reveal a floristic diversity made up of 4 families of conifers with 4 species and 14 of broadleaves with 21 species. Average densities were of $54trees\;ha^{-1}$ and $5.21m^2\;ha^{-1}$ of basal area. Urban-based allometric equations used yielded up to 312.8 tons of carbon stored in trees aboveground biomass equivalent to 1,147.9 tons of $CO_2$ reduced from the atmosphere over the three sites. The rate of carbon storage reaches $15.1tons\;ha^{-1}$. Thus, trees of the three institutional sites in Bukavu play an important role in reducing atmospheric $CO_2$ and contribute, thereby, to mitigate global climate change effects. Given the current environmental challenge associated with high population growth rate in cities, the urban forest ecosystem in DRC requires to be extended and further investigation.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.460-468
• /
• 1985

Changes in intrumental and sensory Theological parameters of chewing gum during storage were stuided. Texture changes are influenced to the great extent by moisture content of stored chewing gum and D.E. of cornsyrup, meanwhile content of cornsyrup, process condition and storage temperature had a little effect on texture change. Highly significant correlation was observed between logarithmic instrumental texture parameters of deformation, bending and puncture test and logarithmic moisture content. And also good correlations were observed between each sensory and instrumental texture parameters. The optimum texture values were estimated by regression analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.633-643
• /
• 2013

GDS format files, as well as layout of the chip are noticeably needed so as to analyze the PDN (Power Delivery Network) inside of IC; however, commercial IC in the market has not supported design information which is layout of IC. Within this, in terms of IC having on-chip PDN, characteristic of inside PDN of the chip is a core parameter to predict generated noise from power/ground planes. Consequently, there is a need to scrutinize extraction method for unknown PDN of the chip in this paper. To extract PDN of the chip without IC circuit information, the de-embedding test vehicle is fabricated based on IEC62014-3. Further more, the extracted inside PDN of chip from de-embedding technique adopts the Co-simulation model which composes PCB, QFN (Quad-FlatNo-leads) Package, and Chip for the PDN, applied Co-simulation model well corresponds with impedance from measured S-parameters up to 4 GHz at common measured and simulated points.

• ETRI Journal
• /
• v.32 no.6
• /
• pp.969-971
• /
• 2010

Based on a de-embedding technique, a new method is proposed which is capable of evaluating chip impedance behavior over absorbed power in flip-chip bonded UHF radio frequency identification transponder ICs. For the de-embedding, four compact co-planar test fixtures, an equivalent circuit for the fixtures, and a parameter extraction procedure for the circuit are developed. The fixtures are designed such that the chip can absorb as much power as possible from a power source without radiating appreciable power. Experimental results show that the proposed modeling method is accurate and produces reliable chip impedance values related with absorbed power.

• Macromolecular Research
• /
• v.17 no.9
• /
• pp.651-657
• /
• 2009

This study examined the optimum compositions of binder, photo-acid generator (PAG) and sensitizer for the cationic ring opening polymerization of 1,3-bis[2-(3-{7-oxabicyclo-[4.1.0]heptyl})]-tetramethyldisiloxane in the presence of polydimethylsiloxane with four epoxide moieties as a co-monomer. When diffractive efficiency (DE) values were compared quantitatively to analyze the effect of the binder on holographic photopolymerization, DE was affected by the viscosity of the binders and miscibility with the monomer mixture. Extremely low DE values were observed when the immiscible dimethyl silicone was used as a binder. Therefore, methylphenyl silicone, which is miscible with the monomer mixture, was used as the binder for further studies. The optimal conditions were a binder viscosity between 250 to 390 cP, and contents of the binder, PAG, and sensitizer were 75-125 wt%, > 6 wt% and 0.05 wt% to the total monomer mixture, respectively.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.271-273
• /
• 2012

중복 제거(De-duplication) 여러 데이터를 저장한 스토리지에서 같은 내용을 담고 있는 파일자체나 블록단위의 chunk 등을 찾아 중복된 내용을 제거하여 중복된 부분은 하나의 데이터 단위를 유지함으로써 스토리지 공간을 절약할 수 있다. 본 논문에서는 실험적인 데이터가 아닌 실제 업무 환경에서 적용될만한 대용량의 데이터 백업을 가정한 상황에 대해 중복 제거 기법을 테스트해봄으로써 중복제거율과 성능을 측정하였으며 이를 시각적으로 표현하는 방법을 제안함으로써 평가자 및 사용자가 알아보기 쉽게 하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.11a
• /
• pp.274-277
• /
• 2012

중복 제거(De-duplication) 기법은 파일시스템 내에서 동일한 내용의 데이터 블록이나 파일의 중복을 제거하여 유일한 내용만을 보관함으로써, 저장장치의 낭비를 막을 수 있다. 상반된 개념으로 결함극복을 위하여 동일한 파일시스템이나 시스템 구성요소를 복제(이중화)함으로써, 일부 시스템 결함시 복제(이중화)된 다른 시스템을 이용하여 신뢰성과 가용도를 향상시킬 수 있다. 그러나 결함 극복을 위한 파일시스템의 이중화는 저장장치의 낭비화 복제된 파일시스템의 일치성 유지에 비용이 소요된다. 본 논문에서는 일정 수준의 가용도를 유지하기 위한 중복제거 기법을 제안하고 성능을 평가하였다. 제안하는 고가용도 중복제거 기법에서는 요구되는 가용도를 유지할 수 있는 범위내에서 중복을 제거하며, 필요에 따라 선택적으로 중복을 유지할 수 있도록 한다.

• Proceedings of the KIEE Conference
• /
• 2002.07c
• /
• pp.1710-1713
• /
• 2002

Recently, the pulsed power system has been used to many applications. Such as remediation of environmental hazards, food sterilization, air pollution control E/P (Electrostatic Precipitator), DeNOx/DeSOx power system, ozone generator, high energy physics, and other power source applications. A pulse energy efficiency for load depends on the rising time, peak value. Pulse duration and impedance matching etc. The pulsed power system generally required for short pulse duration and high peak value was forced to consider its volume and economy. In this paper, we investigated operating characteristics of the CO2 laser using an inductively pulsed power system.