• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
• /
• pp.469-474
• /
• 1999

The object of study is analysis to joint crack behavior of cracked joint concrete pavement. In the new constructing concrete pavement, joint crack behavior was compared general joint depth D/4 with joint depth D/3 and D/5 that it's environmental effects changed temperature and humidity. After joint saw cutting joint section was predicted crack at joint depth D/5 test section from the result for monitoring development of crack. In the setting of data logger system of the joint section, it's data compared see with the naked eye. In the research, development of crack at the joint section should effect to joint saw timing latter than joint depth. This performance could be the minimum of deterioration to the early curing. In this research, At new constructing of joint concrete pavement of highway, the monitoring system be setting after finished paving and joint sawing. The system and see with the naked eye could be analysis to pavement behaviors from collecting data at the test section. This system could be monitoring shot term and long term. In this report, joint section of crack behavior analysis used to collected data during a month after paving and joint sawing.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.581-586
• /
• 2009

Knowledge of ground thermal properties is most important for the proper design of large scale BHE(borehole heat exchanger) systems. The type, pipe size and thermal performance of the BHE is highly dependent on the ground source heatpump system-efficiency and instruction cost. Thermal response tests with mobile measurement devices were developed primarily for insitu determination of design data for large diameter BHE for triple-U spacer apply. The main purpose has been to determine insitu values of effective ground thermal conductivity and thermal resistance, including the effect of ground-water flow and natural convection in the boreholes. The test rig is set up on a some trailer, and contains a circulation pump, a inline heater, temperature sensors, flow meter, power analysis meter and a data logger for recording the temperature, fluid flow data. A constant heat power is injected into the borehole through the tripl-U pipes system of test rig and the resulting temperature change in the borehole is recorded. The recorded temperature data are analysed with a line-source model, which gives the effective insitu values of rock thermal conductivity and borehole thermal resistance of large diameter BHE for spacer apply.

• Journal of Forest and Environmental Science
• /
• 제39권4호
• /
• pp.235-245
• /
• 2023

Forest fuel moisture content is a crucial factor influencing the combustion rate and fuel consumption during forest fires, significantly impacting the occurrence and spread of wildfires. In this study, meteorological data were gathered using a meteorological measuring device (HOBO data logger) installed in the south and north slopes of Kangwon National University Forest, as well as on bare land outside the forest, from November 1, 2021, to October 31, 2022. The objective was to analyze the relationship between meteorological data and fuel moisture content. Fuel moisture content from the ground cover on the south and north slopes was collected. Fallen leaves on the ground were utilized, with a focus on broad-leaved trees (Prunus serrulata, Quercus dentata, Quercus mongolica, and Castanea crenata) and coniferous trees (Pinus densiflora and Pinus koraiensis), categorized by species. Additionally, correlation analysis with fuel moisture content was conducted using temperature (average, maximum, and minimum), humidity (average, minimum), illuminance (average, maximum, and minimum), and wind speed (average, maximum, and minimum) data collected by meteorological measuring devices in the study area. The results indicated a significant correlation between meteorological factors such as temperature, humidity, illuminance, and wind speed, and the moisture content of fuels. Notably, exceptions were observed for the moisture content of the on the north slope and that of the ground cover of Prunus serrulata and Castanea crenata.

• 디지털콘텐츠학회 논문지
• /
• 제18권7호
• /
• pp.1377-1386
• /
• 2017

본 논문에서는 개발 분야가 취약한 해양관련 기상기후와 파고를 실시간으로 측정할 수 있는 스마트 해양기상관측 파고 시스템을 제안하고자 한다. 현재 국내에서는 해양파고 측정 장치가 없으며 대부분 수입하여 사용하고 있다. 대부분 수입 제품은 긴 시간 동안 측정이 불가능 하고 실시간으로 데이터를 전송하지 못하는 단점을 가지고 있다. 따라서 본 논문의 스마트 해양기상관측 파고 시스템은 데이터로거 방식으로 실시간 해양기상을 관측하고 기존의 데이터로거가 가지고 있는 기능과 해양에서 사용할 수 있는 다양한 센서들을 동시에 적용하여 사용할 수 있다. 해양파고 측정은 칼만 필터 알고리즘을 적용하였고 실시간 파고를 측정할 때 발생되는 노이즈와 정확도를 높였다. 본 논문에서는 검교정 장치와 실제 해양 테스트를 통하여 알고리즘을 적용하였을 때와 적용하지 않았을 때를 실험하였고 실험을 통하여 결과를 도출하였다. 개발된 시스템은 해양에서 사용되는 시스템으로 충전이 가능한 리튬 인산철 배터리를 개발하였고 최적의 사용을 위하여 RTC 기반의 타이머를 이용하여 소비 전력을 최소화 하였다. 본 논문에서는 측정 주기에 따른 실험을 통하여 최적의 배터리 사용과 측정값을 도출하였다.

• 지구물리와물리탐사
• /
• 제16권1호
• /
• pp.53-58
• /
• 2013

효과적으로 미소지진을 관측하고 분석할 수 있는 소규모 배열식 지진 관측소와 분석 방법을 소개하였으며, 관측능력을 확인하기 위해 2012년 12월 19일부터 2013년 1월 9일까지 시험 관측을 수행하였다. 중앙에 6 채널 지진 기록계 1 대와 3 성분 지진계 1 대를 설치하고 수직성분 지진계 3 대를 중앙으로부터 약 100 m 정도 떨어진 지점에 삼각형 형태로 각 꼭짓점에 설치하여 소규모 배열식 지진관측소를 구성하였다. 모든 지진계는 동일한 계기 응답 함수를 가지며 하나의 6 채널 지진 기록계에 연결되어 200 sps 의 간격으로 관측 자료를 저장하였다. 3 주의 시험 관측 기간 동안 총 16 개의 미소 지진을 관측하였다. 수직성분 지진계에서 관측한 P파의 도달시간 차이, 3 성분 지진계에서 관측한 P파와 S파의 도달시간 차이, P파와 S파 지진 파형의 배열식 분석으로 얻은 후방 방위각들을 이용해 지진의 진원을 결정하기 때문에 하나의 소규모 배열식 관측소만으로도 진원 결정이 가능하였다. 가장 가까운 거리에서 발생한 미소 지진 2 개의 진앙은 관측 부지로부터 1.3 km 거리에 있는 채석장으로 분석되었으며, 채석장의 발파 기록과 분석된 결과가 서로 일치함을 확인하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2006년도 학술발표회 논문집
• /
• pp.1497-1500
• /
• 2006

The cooling effect of paddy fields was compared with those of other land-use areas (upland, urban park, and urban residential area) during midsummer. The temperature were monitored using data logger at one hour intervals in study sites. Diurnal temperature range of study areas in clear days was larger than in cloudy days. Also, diurnal temperature ranges in paddy field, upland, and park areas were larger than those in the urban residential area during clear days. The paddy field or upland area has shown more remarkable cooling effect compared to urban residential areas: Mean duration of temperature below $25^{\circ}C$ in the paddy field area is longer(7 to 8 hours) than in the residential area; The time to fall to below $25^{\circ}C$ in the paddy field area is sooner than in the residential area; Mean daily minimum temperature in the paddy field area is much lower than in the residential area.

• 한국주거학회논문집
• /
• 제14권3호
• /
• pp.51-56
• /
• 2003

All the outdoor and indoor spaces are connected with each other. The human being moves toward those spaces with temperature fluctuation between the natural and artificial temperature. We conducted an experiment which subjects were wearing the data logger in urban life, and measured 24 hours' exposed temperature and thermal comfort in summer. Results were as follows. 1. Subjects controls their micro climate like this. Most of them(84.6%) get weather information. Fashion(46.2%) and weather(30.8%) are the reasons to select clothes. They spend their time in indoor environment for 84.92% hours of a day and have an air-conditioner(61.5%) in their houses. 2. Temperature fluctuation which subjects were exposed for 24 hours were from 15.6$^{\circ}C$ to 33.8$^{\circ}C$ and average fluctuation was 9.02$^{\circ}C$. The median value of experienced temperature were 26-26.5$^{\circ}C$ and average temperature was 26.18$^{\circ}C$. They experienced cold shock of 3.96 times in a day.

• 조명전기설비학회논문지
• /
• 제28권10호
• /
• pp.1-8
• /
• 2014

Heat dissipation of the high power LED is a critical issue. To estimate the junction temperature of the LED chip is most important in characterizing the heat dissipation, but it is impossible to directly measure it. In this study, surface temperatures of the 12.8W LED bulb was measured for 5 points using a data logger and compared with the simulated results using a thermal simulator based on FVM (finite volume method) to secure a reliability of the simulation. Effects of some factors such as lens, emissivity and air inlet were investigated using simulation works and then the results were analysed.

• KIEAE Journal
• /
• 제8권3호
• /
• pp.101-106
• /
• 2008

The use of daylighting has been increased recently due to energy and visual comfort. The aims of interior daylighting are to adequately illuminate visual tasks, to create an attractive visual environment, and to save electrical energy. Lightpipe can improve the distribution of light to interior spaces. This study aims to evaluate the comparative daylighting performance of lightpipe under different sky conditions with mock-up model, sized $6m{\times}6m{\times}4m$ ($w{\times}d{\times}h$). For the purpose, perpendicular lightpipe system was designed as 650 diameter, with an aspect ratio of 2. Totally 49 measuring points of and two of outdoor illuminance on the horizontal plane were monitored from 09:00 to 18:30 on April 29 and May 15 2008. Agilent data logger and photometric sensor were used. Light factor were used to analyse daylight performance under different sky condition. Under overcast sky condition and clear sky condition, the lightpipe system is suitable for KS recommendation level of illuminance.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1384-1389
• /
• 2005

A real-time monitoring system for in-situ soil remediation technologies is developed and then applied to electrokinetic remediation technique in the field trial tests during 150days. The developed system is consisted the controlled program based on internet web page, data logger, measurement instruments and so on. In the measured items there are pH, temperature, electrical current and potential, vacuum pressure. The results indicated that the system is successively applied to electrokinetic remediation technique, and further research considering economic view and multi purpose system for in-situ soil remediation technologies is needed.