• Progress in Medical Physics
• /
• v.3 no.1
• /
• pp.71-78
• /
• 1992

This study describes the design of the biophysiological signal processing analyzer which can collect and analyze the biosignal raw data. System hardware is consisted of the IBM PC AT. pre-amplifier. AID converter, Counter/Timer. and RS-232C processor. Biophysiological signal data were processed by the software digital filter. FFT and graphic processing routine. The tachogram and FFT of the the peak to peak interval time was accomplished by the Graphic user interface software using the biophysiological signal processed data. Using this system. the powerspectrum of the heart rate variability during the long term could be observed. Experimental results of this system approach our purpose. which is improved the cost performance. easy to use. reducing raw-data noise and optimizing model for digital filter.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.709-711
• /
• 2005

Developing fault location system for underground power cable which can detect its fault location exactly require very high speed data acquisition and signal processing capability. We are developing fault location system which is different from conventional fault locator. This fault location system monitor underground power cable by using on-line speed current sensor and if there are an accident, it record its transient signal and calculate fault location by analyzing it. Signals which acquired when power cable fault arise, showed transient characteristics and its frequency band is very hish. So, to develop fault location system, we designed special high speed data acquisition and signal processing board. In this thesis, we describe on data acquisition and signal processing H/W design for fault location system on underground power cable.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.6
• /
• pp.67-76
• /
• 1997

In radar signal processing, an A/D converter with sufficient dynamic range and high sampling speed is required to detect the weakest target signals in heavy clutter and ECM environments. As the sampling frequency increases, the amount of digital data transfered to the signal processing module is also increased. To overcome these massive data transfer burden, we need an A/D conversion module with an enough data transfer rate. In this paper, we proposed an implementation scheme of a new A/D conversio module that can be used in multi-mode 3-D phased array radar signal processing system, and evaluated the performance. The proposed A/D conversion module is implemented with a standard A/D converter and a 6U-standard VME bus.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2012.04a
• /
• pp.961-963
• /
• 2012

The sound source localization system is used to some area such as robotic system, object localization system, guarding system and medicine. So time delay estimation and angle estimation of sound direction are studied until now. These days time delay estimation is described in LabVIEW which is used to create innovative computer-based product and deploy measurement and control systems. In this paper, the development of signal monitoring platform is presented for sound source localization. This platform is designed in virtual instrument program and implemented in two stages. In first stage, data acquisition system is proposed and designed to analyze time delay estimation using cross correlation. In second stage, data obtaining system which is applied and designed to monitor analog signal processing is proposed.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.1064-1066
• /
• 2003

In this paper, ground penetrating radar (GPR), which has the capability to detect non metal and plastic mines, is proposed to detect and discriminate antipersonnel (AP) landmines. The time domain GPR - Impulse radar and frequency domain GPR - SFCW (Stepped Frequency Continuous Wave) radar is utilized for metal and non-metal landmine detection and its performance is investigated. Since signal processing is vital for target reorganization and clutter rejection, we implemented the MUSIC (Multiple Signal Classification) algorithm for the signal processing of SFCW radar data and SAR (Synthetic Aperture Radar) processing method for the signal processing of Impulse radar data.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.05a
• /
• pp.555-556
• /
• 2012

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.11a
• /
• pp.359-364
• /
• 2004

This paper deals with the comparison of signal processing techniques of ultrasonic data. The goal of signal processing is the ultrasonic speckle suppression and the visibility enhancement of flaw-reflected ultrasonic echo. The performance of conventional SSP(split spectrum processing) method and the wavelet denoising method are compared and discussed for tested ultrasonic data. Tested ultrasonic data obtained from the weld area of centrifugal-casted stainless steel material and safe-ending material with holes and notch of variable depths are presented. In experimental results, the outputs of wavelet-based denoising method show the clear and sharp peaks at the positions of flaw-reflected echos comparing with those of SSP method.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.E2
• /
• pp.66-73
• /
• 2007

The introduction of tracer gas techniques to ventilation studies in indoor environments provides valuable information that used to be unattainable from conventional testing environments. Data acquisition systems (DASs) containing analogue-to-digital (A/D) converters are usually used to function the key role that records signals to storage in digital format. In the testing process, there exist a number of components in the measuring equipment which may produce system-based inference to the monitored results. These unwanted fluctuations may cause significant error in data analysis, especially when non-linear algorithms are involved. In this study, a pre-processor is developed and applied to separate the unwanted fluctuations (noise or interference) in raw measurements and to reduce the uncertainty in the measurement. Moving average, notch filter, FIR (Finite Impulse Response) filters, and IIR (Infinite Impulse Response) filters are designed and applied to collect the desired information from the raw measurements. Tracer gas concentrations are monitored during leakage and ventilation tests in the model test room. The signal analysis functions are introduced to carry out the digital signal processing (DSP) work. Overall the FIR filters process the $CO_2$ measurement properly for ventilation rate and mean age of air calculations. It is found that, the Kaiser filter was the most applicable digital filter for pre-processing the tracer gas measurements. Although the IIR filters help to reduce the random noise in the data, they cause considerable changes to the filtered data, which is not desirable.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.4
• /
• pp.482-490
• /
• 2017

The radar signal processing procedure is divided into the pre-processing such as frequency down converting, down sampling, pulse compression, and etc, and the post-processing such as doppler filtering, extracting target information, detecting, tracking, and etc. The former is generally designed using FPGA because the procedure is relatively simple even though there are large amounts of ADC data to organize very quickly. On the other hand, in general, the latter is parallel processed by multiple DSPs because of complexity, flexibility and real-time processing. This paper presents the radar signal processor design using FPGA which includes not only the pre-processing but also the post-processing such as doppler filtering, bore-sight error, NCI(Non-Coherent Integration), CFAR(Constant False Alarm Rate) and etc.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.27 no.1
• /
• pp.76-86
• /
• 2023

Radars used by air-crafts have two important characteristics; First, they should have a real-time signal processing system finishing signal processing before deadline while getting and processing successive in-phase and quadrature data. Second, they can cover a lot of modes including A2A(Air to Air), A2G(Air to Gound), A2S(Air to Sea), and Ground Map(GM). So the structure of radar signal processing SWs in modern airborne radars are becoming more complicate. Also, the implementation of radar signal processing SW needs to reuse common code blocks between other modes for efficiency or change some of the code blocks into alternative algorithm blocks. These are the reason why the radar signal processing SW framework suggested in this paper is taking advantage of modular programming. This paper proposes an modular framework applicable on the airborne radar signal processing SW maintaining the real-time characteristic using the signal processing procedures for A2G/A2S as examples.