• 한국지하수토양환경학회지:지하수토양환경
• /
• 제9권1호
• /
• pp.1-11
• /
• 2004

다공성 매질내의 거품(foam)은 가스상의 이동성을 감소시키는 특성을 가진다. 이러한 성질은 석유산업에서 중력으로 인한 유체유동을 방지하거나 산(acid)을 이용하여 유정(wellbore) 근처 유체투과율이 낮은 지층을 처리하는데도 사용될 뿐만 아니라, 지하 대수층의 오염물 회수율을 높이는 데도 사용된다. 최근의 연구결과를 통하여 다공성 매질 내 거품의 유동은 유동영역(flow regime)에 의하여 크게 영향을 받는다는 사실을 규명하였다. 이 논문은 실험자료와 수치해석기법을 이용하여, 지하 오염물질 정화를 위한 거품 유동분할 작업의 타당성에 관한 연구이다. 두 종류의 유체 투과율(k=9.1과 30.4 darcy)을 가지고 실험한 결과, 대수층 조건과 비슷한 실험환경에서도 정상상태의 거품은 유동영역에 따라 다른 성질을 보인다는 사실을 알 수 있었다. 거품의 질이 낮은 영역(low-quality regime)에 있는 거품은 shear thinning 거동을 보이며 고질영역(high-quality regime)에 있는 거품은 Newtonian 거동과 유사하였다. 이상의 실험 결과를 유체투과율이 서로 다른 두 지층에 대하여 거품의 유동분할을 예측하기 위하여 간단한 수치해석 모델을 개발하였다. 수치해석의 결과로부터 고질영역에 있는 거품은 유동분할 양상을 보였지만 저질영역에 있는 거품은 그렇지 않았다. 민감도 분석의 결과 고질영역에서의 유동분할은 각 지층들의 한계 모세관압, 즉 거품이 생성되고 유지되기 위한 최소 모세관압에 의해 좌우된다는 사실을 확인하였다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제15권3호
• /
• pp.161-175
• /
• 2011

An n-string tangle is a three dimensional ball with n strings properly embedded in it. A tangle model of a DNA-protein complex is first introduced by C. Ernst and D. Sumners in 1980's. They assumed the protein bound DNA as strings and the protein as a three dimensional ball. By using a tangle analysis, one can predict the topology of DNA within the complex. S.Kim and I. Darcy developed the biologically reasonable 4-string tangle equations and decided a solution tangle, called R-standard tangle. The author discussed more about the simple solution tangles of the equations and found a generalized R-standard tangle solution.

• 대한기계학회논문집B
• /
• 제22권4호
• /
• pp.428-439
• /
• 1998

Fluid flow and heat transfer have been numerically investigated for an oscillating flow in a tube with a regenerator. The regenerator is placed between hot and cold spaces which are heated and cooled at uniform temperature. An oscillating flow is generated by the piston motion at both ends of a tube. The time dependent, two-dimensional Navier-Stokes equations and energy equation are solved by using the finite-volume and moving grid method. The regenerator is adopted as Brinkmann-Forchheimer extended Darcy model. Numerical results are obtained for the flow and temperature fields, and described the effects of the oscillating frequency and amplitude ratio by the piston motion as well as the aspect ratio. The numerical results obtained indicate that the heat transfer between the tube wall and oscillating flow is increased as the oscillating frequency, amplitude ratio and the aspect ratio are increased.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.112-117
• /
• 2000

A numerical study on natural convection in a vertical square cavity filled with a porous medium is carried out with Brinkman-Forchheimer-extended Darcy flow model, and the validity of local thermodynamic equilibrium assumption is studied. The local thermodynamic equilibrium refers to the state in which a single temperature can be used to describe a heat transfer process in a multiphase system. With this assumption, the analysis is greatly simplified because only one equation is needed to describe the heat transfer process. But prior to using this assumption, it is necessary to know in what conditions the assumption can be used. The numerical results of this study reveal that large temperature difference between fluid phase and solid phase exists near wall region, paticularily when the convection becomes dominant over conduction. And the influence of flow parameters such as fluid Rayleigh number, fluid Prandtl number, dimensionless particle diameter and conductivity ratio are investigated.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제11권1호
• /
• pp.1-11
• /
• 2007

A linear stability analysis applied to a system consist of a horizontal fluid layer overlying a layer of a porous medium affected by a vertical magnetic field on both layers. Flow in porous medium is assumed to be governed by Darcy's law. The Beavers-Joseph condition is applied at the interface between the two layers. Numerical solutions are obtained for stationary convection case using the method of expansion of Chebyshev polynomials. It is found that the spectral method has a strong ability to solve the multilayered problem and that the magnetic field has a strong effect in his model.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.685-693
• /
• 1990

본 연구에서는 복사열전달 효과를 알아보기 위해 에너지 방정식을 수치적으로 풀었으며, 그 결과를 열전달계수 및 온도의 항으로 나타내었다. 수치 해석적 모델의 검증을 위해 여러사람들이 물질전달과정 해석을 위해 사용한 나프타린 승화법(naphth- alene sublimation technique)을 이용하여 실험을 수행하였다. 또한 실험에 사용된 다공질체(ceramic blocks)의 침투율도 측정하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1107-1114
• /
• 2003

In this thesis, the dynamic characteristic analysis of carriage structure supported by air bearings were peformed. Toward this end, the characteristics of air bearing were numerically analyzed to estimate the stiffness of the air bearing and the clearance between air bearing and guide surface. The modal analysis of the carriage structure was peformed by using finite element method, and the experimental modal analysis was also performed to validate the finite element model, where rigid body modes were compared to validate the stiffness of the air bearings. From the results, the air spring stiffness can be estimated within the range of acceptable accuracy under any pressure and clearance condition.

• Tribology and Lubricants
• /
• 제22권2호
• /
• pp.93-98
• /
• 2006

The numerical analysis of the negative pressure porous gas bearings is presented. The pressure distribution is calculated using the finite difference method. The Reynolds equation and Darcy's equation are solved simultaneously. The air bearing stiffness and damping are evaluated using the perturbation method. Rectangular uniform grid is employed to model the bearing. The vacuum preloading is considered. The pressure in the vacuum pocket is assumed to be a constant negative pressure. The total load, stiffness, damping and flow rate are calculated fur several geometrical configurations and several values of negative pressure. It is found that too large vacuum pocket can result in negative total force.

• Geomechanics and Engineering
• /
• 제20권4호
• /
• pp.313-322
• /
• 2020

This study focuses on a prediction approach of compaction compensation grouting efficiency in sandy soil. Based on Darcy's law, assuming that the grouting volume is equal to the volume of the compressed soil, a two-dimensional calculation model of the compaction compensation grouting efficiency was improved to three-dimensional, which established a dynamic relationship between the radius of the grout body and the grouting time. The effectiveness of this approach was verified by finite element analysis. The calculation results show that the grouting efficiency decreases with time and tends to be stable. Meanwhile, it also indicates that the decrease of grouting efficiency mainly occurs in the process of grouting and will continue to decline in a short time after the completion of grouting. The prediction three-dimensional model proposed in this paper effectively complements the dynamic relationship between grouting compaction radius and grouting time, which can more accurately evaluate the grouting efficiency. It is practically significant to ensure construction safety, control grouting process, and reduce the settlement induced by tunnel excavation.

• 한국전산유체공학회지
• /
• 제20권1호
• /
• pp.39-46
• /
• 2015

In this research, we studied the pressure drop affecting on the internal surface roughness and the curvature radius of a U-tube, which is used for the cooling system in PWR(Pressurized Water Reactor). Using ANSYS-FLUENT, a commercial code based on CFD(Computational Fluid Dynamics) technique, we compared a Moody chart with the Darcy friction factor changed by a range of various surface roughness and Reynolds numbers of a straight pipe model. We studied the effect giving variation about a range of various surface roughness and the curvature radius of the full scale U-tube model. The material of the heat transfer tube is Inconel 690 used in the steam generator. We compared the velocity distribution of selected 4 locations, and derived the correlation between the surface roughness and the pressure drop for the U-tube of each representative curvature radius using the linear regression method.