• Title/Summary/Keyword: DT&E

Search Result 142, Processing Time 0.022 seconds

Derivation of the Energy Function Reflecting Exciter Control Effects (여자기 제어 효과를 고려한 에너지함수 유도 및 적용가능성에 관한 기초 연구)

  • Kim, Gu-Han;Choi, Byoung-Kon;Park, Jeong-Do;Moon, Young-Hyun
    • Proceedings of the KIEE Conference
    • /
    • 2000.11a
    • /
    • pp.125-128
    • /
    • 2000
  • This paper presents an energy function which provides the direct relationships between the system stability and parameters of the exciter system. The energy function is derived from the energy conservation law by using the first motion integral. he time derivative does not absolutely satisfy the seminegativeness. However dE/dt usually has big negative value just after the fault clearing so that the energy is rapidly decreased. In this situation, the system state can be obviously confined in a stable region if the intial energy is less than the UEP energy. With these observation, two theorems are developed regarding the state confinement and asymptotic stability. Based on two theorems a new approximated direct energy method is developed to analyze the transient stability with the consideration of the exciter control effects. The proposed method has been tested for a single-machine-infinite bus system.

  • PDF

THE 3D BOUSSINESQ EQUATIONS WITH REGULARITY IN THE HORIZONTAL COMPONENT OF THE VELOCITY

  • Liu, Qiao
    • Bulletin of the Korean Mathematical Society
    • /
    • v.57 no.3
    • /
    • pp.649-660
    • /
    • 2020
  • This paper proves a new regularity criterion for solutions to the Cauchy problem of the 3D Boussinesq equations via one directional derivative of the horizontal component of the velocity field (i.e., (∂iu1; ∂ju2; 0) where i, j ∈ {1, 2, 3}) in the framework of the anisotropic Lebesgue spaces. More precisely, for 0 < T < ∞, if $$\large{\normalsize\displaystyle\smashmargin{2}{\int\nolimits_o}^T}({\HUGE\left\|{\small{\parallel}{\partial}_iu_1(t){\parallel}_{L^{\alpha}_{x_i}}}\right\|}{\small^{\gamma}_{L^{\beta}_{x_{\hat{i}}x_{\bar{i}}}}+}{\HUGE\left\|{\small{\parallel}{\partial}_iu_2(t){\parallel}_{L^{\alpha}_{x_j}}}\right\|}{\small^{\gamma}_{L^{\beta}_{x_{\hat{i}}x_{\bar{i}}}}})dt<{{\infty}},$$ where ${\frac{2}{{\gamma}}}+{\frac{1}{{\alpha}}}+{\frac{2}{{\beta}}}=m{\in}[1,{\frac{3}{2}})$ and ${\frac{3}{m}}{\leq}{\alpha}{\leq}{\beta}<{\frac{1}{m-1}}$, then the corresponding solution (u, θ) to the 3D Boussinesq equations is regular on [0, T]. Here, (i, ${\hat{i}}$, ${\tilde{i}}$) and (j, ${\hat{j}}$, ${\tilde{j}}$) belong to the permutation group on the set 𝕊3 := {1, 2, 3}. This result reveals that the horizontal component of the velocity field plays a dominant role in regularity theory of the Boussinesq equations.

Effect of current waveform on drop transfer in pulsed gas metal arc welding (Pulsed GMAW 의 전류 파형이 금속이행에 미치는 영향)

  • Hammad, Muhammad A.;Yoo, Choong-D.
    • Proceedings of the KWS Conference
    • /
    • 2009.11a
    • /
    • pp.48-48
    • /
    • 2009
  • Conventionally in pulsed gas metal arc welding (GMAW-P), drop transfer is analyzed with simplest square pulse waveform. While the pulse current is described by four parameters (peak current magnitude and time plus base current magnitude and time), it deviates the real pulse shape. Real pulse can be better idealized by the trapezoidal pulse waveform described by two additional parameters, i.e., current rise and fall rate (dI/dt). Power source response rate is described by these parameters. In this work, the effect of these parameters on drop transfer is predicted by the force displacement model (FDM). While peak current has significant effects on drop detachment, drop transfer is also influenced by the current rise rate. Predictions indicate that the current rise rate can have considerable effects on the size of the detached drop if other pulse parameters are kept constant. FDM is applied to determine peak time for one drop one pulse condition (ODOP) when rests of the pulse parameters are given. The predicted range of ODOP shows good agreement with experimental data.

  • PDF

Absorption of Water by Husked and Naked Barley (겉보리 및 쌀보리의 수화속도)

  • Lee, Jong-Sook;Kim, Sung-Kon
    • Korean Journal of Food Science and Technology
    • /
    • v.15 no.3
    • /
    • pp.220-224
    • /
    • 1983
  • The hydration of water, at $20^{\circ}\;30^{\circ}$ and $40^{\circ}C$ for 10-360 minutes, by the two varieties of husked barley and of naked barley which were polished to 40 and 30%, respectively, was investigated. The absorption was directly proportional to the square root of the hydration time and accounted for by the diffusion equation: 1-M = $(2/{\sqrt\pi})\;(S/V){\sqrt{Dt}}$, where 1-M is the relative moisture gain and S/V is the surface-to-volume ratio. The average diffusion coefficient (D) was given by the Arrhenius relation: D = $D_{0}\;exp\;(-Ea/RT)$, where the activation energy for both husked and naked barley was about 7.2 Kcal/mole. The average value of D for naked barley was slightly higher than that for husked barley.

  • PDF

Soft ice-cream maker operating with mixed refrigerant R290/R32 (혼합냉매 (R290/R32) 적용 소프트 아이스크림 제조기 (drop-in 시험))

  • Park, Tae-Gyun;Han, Seong-Pil;Lee, Eung-Ryeol;Kim, Nae-Hyeon;Park, Hyeong-Chae
    • Proceedings of the SAREK Conference
    • /
    • 2005.11a
    • /
    • pp.410-413
    • /
    • 2005
  • Drop-in tests were conducted using R290/R32 (31:69) mixture in an ice-cream maker for possible replacement of R-502 and R-404A. Optimum refrigerant charge and TEV opening were obtained through a series of experiments. At the standard outdoor condition ($35^{\circ}C$ DT, $24^{\circ}C$ WT), the time required for initial ice-cream making was 6'22", which was approximately the same as that of R-404A. The electric energy consumed was 660 kJ, which was about 10% higher than that of R-404A. The compressor outlet temperature ($8^{\circ}C$) and pressure (2.52 MPa) were higher than those ($60^{\circ}C$ and 1.48 MPa) of R-404A. The reason could be the usage of the same R-404A compressor although the specific volume of R290/R32 is much larger.

  • PDF

A Comparative Study on Interference-Limited Two-Way Transmission Protocols

  • Xia, Xiaochen;Zhang, Dongmei;Xu, Kui;Xu, Youyun
    • Journal of Communications and Networks
    • /
    • v.18 no.3
    • /
    • pp.351-363
    • /
    • 2016
  • This paper investigates the performance of interference-limited two-way transmission protocols in the Rayleigh fading channels. New lower bound of outage probability and approximate expression of bit error rate (BER) for three-phase two-way relaying (3P-TWR) protocol are derived in closed-form. These expressions are valid for arbitrary signal-to-noise ratio values, numbers of co-channel interferers and amajority of modulation formats employed in the practical system. Then a comparative study is developed for the performance of three two-way transmission protocols, i.e., direct transmission (DT) protocol, two-phase two-way relaying (2P-TWR) protocol and 3P-TWR protocol based on the asymptotic expressions of outage probability and BER. On the basis of the theoretical results, the thresholds on the strength (variance) of direct channel and target rate for the relative performance of different protocols are obtained and the effect of interferences at the terminal and relay on the relative performance is analyzed. The results present key insights on how to choose proper two-way transmission protocol with the knowledge of fading channels, required date rate and modulation format to optimize the system performance in the practical interference-limited scenarios. Simulation results are presented to validate the theoretical analysis.

Localization Developments on Electric Igniter for Thermal Battery of a Missile on K-PSAM (신궁 장입유도탄 열전지용 전기식 착화기 국산화 개발)

  • Ahn, Mahn-Ki;Jeon, Jae-Hyun;Ahn, Gil-hwan;Lee, Seung-Young
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.20 no.4
    • /
    • pp.536-542
    • /
    • 2017
  • In this paper, authors described on localization development's results about an electric igniter in thermal battery with a pyrotechnic heat sources. Especially, the development test and evaluation(DT&E) process and the methods in the developments of the electric igniter which is parts of a domestic thermal battery on K-PSAM was in charge of government and developed for defense of a local areas in Korea. We have proposed a process of design and manufacture on the electric igniter. Finally, we verified a quality and a reliability of the electric igniter from test results by Fisher-Snedecor's law and over 99.5 %(C.L. 95 %) for K-PSAM.

A dynamic procedure for defection detection and prevention based on SOM and a Markov chain

  • Kim, Young-ae;Song, Hee-seok;Kim, Soung-hie
    • Proceedings of the KAIS Fall Conference
    • /
    • 2003.11a
    • /
    • pp.141-148
    • /
    • 2003
  • Customer retention is a common concern for many industries and a critical issue for the survival in today's greatly compressed marketplace. Current customer retention models only focus on detection of potential defectors based on the likelihood of defection by using demographic and customer profile information. In this paper, we propose a dynamic procedure for defection detection and prevention using past and current customer behavior by utilizing SOM and Markov chain. The basic idea originates from the observation that a customer has a tendency to change his behavior (i.e. trim-out his usage volumes) before his eventual withdrawal. This gradual pulling out process offers the company the opportunity to detect the defection signals. With this approach, we have two significant benefits compared with existing defection detection studies. First, our procedure can predict when the potential defectors could withdraw and this feature helps to give marketing managers ample lead-time for preparing defection prevention plans. The second benefit is that our approach can provide a procedure for not only defection detection but also defection prevention, which could suggest the desirable behavior state for the next period so as to lower the likelihood of defection. We applied our dynamic procedure for defection detection and prevention to the online gaming industry. Our suggested procedure could predict potential defectors without deterioration of prediction accuracy compared to that of the MLP neural network and DT.

  • PDF

ON A CLASS OF MULTIVALENT FUNCTIONS WITH NEGATIVE COEFFICIENTS

  • Shukla, S.L.;Chaudhary, A.M.;Owa, S.
    • Kyungpook Mathematical Journal
    • /
    • v.28 no.2
    • /
    • pp.129-139
    • /
    • 1988
  • Let $T^{\alpha}_{\lambda}$(p, A, B) denote the class of functions $$f(z)=z^p-{\sum\limits^{\infty}_{k=1}}{\mid}a_{p+k}{\mid}z^{p+k}$$ which are regular and p valent in the unit disc U = {z: |z| <1} and satisfying the condition $\left|{\frac{{e^{ia}}\{{\frac{f^{\prime}(z)}{z^{p-1}}-p}\}}{(A-B){\lambda}p{\cos}{\alpha}-Be^{i{\alpha}}\{\frac{f^{\prime}(z)}{z^{p-1}}-p\}}}\right|$<1, $z{\in}U$, where 0<${\lambda}{\leq}1$, $-\frac{\pi}{2}$<${\alpha}$<$\frac{\pi}{2}$, $-1{\leq}A$<$B{\leq}1$, 0<$B{\leq}1$ and $p{\in}N=\{1,2,3,{\cdots}\}$. In this paper, we obtain sharp results concerning coefficient estimates, distortion theorem and radius of convexity for the class $T^{\alpha}_{\lambda}$(p, A, B). It is further shown that the class $T^{\alpha}_{\lambda}$(p, A, B) is closed under "arithmetic mean" and "convex linear combinations". We also obtain class preserving integral operators of the form $F(z)=\frac{p+c}{z^c}{\int^z_0t^{c-1}}f(t)dt$, c>-p, for the class $T^{\alpha}_{\lambda}$(p, A, B). Conversely when $F(z){\in}T^{\alpha}_{\lambda}$(p, A, B), radius of p valence of f(z) has also determined.

  • PDF

Numerical analysis about current non-uniformity in superconducting CICC (cable-in-conduit conductor) joint (초전도 관내연선도체 접합부에서의 전류 불균일에 대한 수치적 분석)

  • Lee, Sang-Il;Jeong, Sang-Kwon;Choi, Sung-Min;Park, Kap-Rai
    • Progress in Superconductivity and Cryogenics
    • /
    • v.9 no.3
    • /
    • pp.41-45
    • /
    • 2007
  • This paper presents transport current non-uniformity in a joint for superconducting multistage cable-in-conduit conductor (CICC) and relaxation in the CICC. The joint is considered to have a current loop linked to an external magnetic field so that it becomes an emf voltage source. It is numerically analyzed using an electrical transmission line model. The inductive current in a resistive joint is compared to that of a non-resistive joint when the ramping field is applied vertically to the joints. Regarding the parameter values of the model. a full scale $Nb_3Sn$ CICC and a strand-to-strand (STS) joint for the toroidal field magnet of the KSTAR (Korea Superconducting Tokamak Advanced Research) device are referenced to. It is found that the resistive joint prevents the current from rising too much and enhances decaying the current when the ramping stops. The 'flattop' current is found to be proportional to the ramp rate of the field (dB/dt). The relaxation length, which is defined as the length within which the maximum induced current falls by 1/e. is found to saturate within 0.27m.