• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.109-109
• /
• 2011

1T-1C로 구성되는 기존의 DRAM(Dynamic Random Access Memory)은 데이터를 저장하기 위한 적절한 capacitance를 확보해야 한다. 따라서 캐패시터 면적으로 인한 집적도에 한계에 직면해있다. 따라서 이를 대체하기 위한 새로운 DRAM인 1T (Transistor) DRAM이 각광받고 있다. 기존의 DRAM과 달리 SOI (Silicon On Insulator)기술을 이용한 1T-DRAM은 데이터 저장을 위한 캐패시터가 필요없다. Impact Ionization 또는 GIDL을 이용해 발생한 정공을 채널영역에 가둠으로 서 발생하는 포텐셜 변화를 이용한다. 이로서 드레인 전류가 변화하며, 이를 이용해 '0'과 '1'을 구분한다. 기존의 1T-DRAM은 단결정 실리콘을 이용하여 개발되었으나 좀더 광범위한 디바이스로의 적용을 위해서는 다결정 실리콘 박막의 형태로 제작이 필수적이다. 단결정 실리콘을 이용할 경우 3차원 집적이나 기판재료선택에 제한적이지만 다결정 실리콘을 이용할 경우, 기판결정이 자유로우며 실리콘 박막이나 매몰 산화층의 형성 및 두께 조절이 용이하다. 때문에 3차원 적층에 유리하여 다결정 실리콘 박막 형태의 1T-DRAM 제작이 요구되고 있다. 따라서 이번연구에서는 엑시머 레이저 어닐링 및 고상결정화 방법을 이용하여 결정화 시킨 다결정 실리콘을 이용하여 1T-DRAM을 제작하였으며 메모리 특성을 확인하였다. 기판은 상부실리콘 100 nm, buried oxide 200 nm로 구성된 SOI구조의 기판을 사용하였다. 엑시머 레이저 어닐링의 경우 400 mJ/cm2의 에너지를 가지는 KrF 248 nm 엑시머 레이저 이용하여 결정화시켰으며, 고상결정화 방법은 $400^{\circ}C$ 질소 분위기에서 24시간 열처리하여 결정화 시켰다. 두가지 결정화 방법을 사용하여 제작되어진 박막트랜지스터 1T-DRAM 모두 kink 현상을 확인할 수 있었으며 메모리 특성 역시 확인할 수 있었다.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.2
• /
• pp.55-61
• /
• 1999

A soft error rate (SER) simulator for DRAM was developed. In comparison to the other SER simulator using device simulator or Monte Carlo simulator, the proposed simulator substantially reduced the CPU time using an analytical model for the alpha-particle-induced charge collection. By analysing the soft error modes in DRAM, the bit-bar mode was identified as the main cause of soft error. Using the new SER simulator, SER of 256M DRAM was investigated and it was found that the storage capacitance had a 5fF margin.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.2
• /
• pp.76-80
• /
• 2014

Dual-gate PCRAM which unify capacitor-less DRAM and NVM using a PCM instead of a typical SONOS flash memory is proposed as 1 transistor. $VO_2$ changes its phase between insulator and metal states by temperature and field. The front-gate and back-gate control NVM and DRAM, respectively. The feasibility of URAM is investigated through simulation using c-interpreter and finite element analysis. Threshold voltage of NVM is 0.5 V that is based on measured results from previous fabricated 1TPCM with $VO_2$. Current sensing margin of DRAM is 3 ${\mu}A$. PCM does not interfere with DRAM in the memory characteristics unlike SONOS NVM. This novel unified dual-gate PCRAM reported in this work has 1 transistor, a low RESET/SET voltage, a fast write/erase time and a small cell so that it could be suitable for future production of URAM.

• Journal of KIISE
• /
• v.42 no.1
• /
• pp.107-113
• /
• 2015

In a database system, updates on pages that are made by a transaction should be stored in a secondary storage before the commit is complete. Generic secondary storages have volatile DRAM caches to hide long latency for non-volatile media. However, as logs that are only written to the volatile DRAM cache don't ensure durability, logging latency cannot be hidden. Recently, a flash SSD with capacitor-backed DRAM cache was developed to overcome the shortcoming. Storage devices, like those with a non-volatile cache, will increase transaction throughput because transactions can commit as soon as the logs reach the cache. In this paper, we analyzed performance in terms of transaction throughput when the SSD with capacitor-backed DRAM cache was used as log storage. The transaction throughput can be improved over three times, by committing right after storing the logs to the DRAM cache, rather than to a secondary storage device. Also, we showed that it could acquire over 73% of the ideal logging performance with proper tuning.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.26 no.2
• /
• pp.327-334
• /
• 2016

Contrary to the common belief, DRAM which is used for the main memory of various computing devices retains its content even though it is powered-off. Especially, the data-retaining time can increase if DRAM is cooled down. The Cold Boot Attack, a kind of side-channel attacks, tries to recover the sensitive information such as the cryptographic key from the powered-off DRAM. This paper proposes a new algorithm which recovers the AES key under the symmetric-decay cold-boot-attack model. In particular, the proposed algorithm uses the strategy of reducing the size of the candidate key space by testing the randomness of the extracted AES key bit stream.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.260-266
• /
• 2013

The open bit line is vulnerable to noise compared to the folded bit line when read/write for the DRAM. According to the increasing DRAM densities, the core circuit operating conditions is exacerbated by the noise when it comes to the open bit line 6F2(F : Feature Size) structure. In this paper, the interference effects were analyzed by the data patterns between the bit line by experiments. It was beyond the scope of existing research. 68nm Tech. 1Gb DDR2, Advan Tester used in the experiments. The noise effects appears the degrade of internal operation margin of DRAM. This paper investigates sense amplifier power line splits by experiments. The noise can be improved by 0.2ns(1.3%)~1.9ns(12.7%), when the sense amplifier power lines split. It was simulated by 68nm Technology 1Gb DDR2 modeling.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.35-35
• /
• 2009

Capacitorless one transistor dynamic random access memory (1T-DRAM) cells were fabricated on the fully depleted strained-silicon-on-insulator (FD sSOI) and the effects of silicon back interface state on buried oxide (BOX) layer on the memory properties were evaluated. As a result, the fabricated 1T-DRAM cells showed superior electrical characteristics and a large sensing current margin (${\Delta}I_s$) between "1" state and "0" state. The back interface of SOI based capacitorless 1T-DRAM memory cell plays an important role on the memory performance. As the back interface properties were degraded by increase rapid thermal annealing (RTA) process, the performance of 1T-DRAM was also degraded. On the other hand, the properties of back interface and the performance of 1T-DRAM were considerably improved by post RTA annealing process at $450^{\circ}C$ for 30 min in a 2% $H_2/N_2$ ambient.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.3 no.2
• /
• pp.76-82
• /
• 2003

The robust stack storage node and sufficient cell capacitance for high performance is indispensable for 90 nm DRAM capacitor. For the first time, we successfully demonstrated MIS capacitor process integration for 90 nm DRAM technology. Novel cell layout and integration technology of 90 nm DRAM capacitor is proposed and developed, and it can be extended to the next generation DRAM. Diamond-shaped OCS with 1.8 um stack height is newly developed for large capacitor area with better stability. Furthermore, the novel $Al_2O_3/HfO_2$ dielectric material with equivalent oxide thickness (EOT) of 25 ${\AA}$ is adopted for obtaining sufficient cell capacitance. The reliable cell capacitance and leakage current of MIS capacitor is obtained with ~26 fF/cell and < 1 fA/ceil by $Al_2O_3/HfO_2$ dielectric material, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.485-490
• /
• 2010

We propose the equivalent circuit model including all parasitic components in input gate of sense amplifier of DDI DRAM with butting contact structure. We analysed the effect of parasitic schottky diode by using the proposed model in the operation of sense amplifier. The cause of single side fail and the temperature dependence of fail rate in DDI DRAM are due to creation of the parasitic schottky diode in input gate of sense amplifier. The parasitic schottky diode cause the voltage drop in input gate, and result in decreasing noise margin of sense amplifier. therefore single side fail rate increase.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.202-202
• /
• 2010

최근 반도체 소자의 미세화에 따라, 단채널 효과에 의한 누설전류 및 소비전력증가 등이 문제가 되고 있다. DRAM의 경우, 캐패시터 영역의 축소문제가 소자집적화를 방해하는 요소로 작용하고 있다. 1T-DRAM은 기존의 DRAM과 달리 캐패시터 영역을 없애고 상부실리콘의 중성영역에 전하를 저장함으로써 소자집적화에 구조적인 이점을 갖는다. 또한 silicon-on-insulator (SOI) 기판을 이용할 경우, 뛰어난 전기적 절연 특성과 기생 정전용량의 감소, 소자의 저전력화를 실현할 수 있다. 본 연구에서는 silicon-germanium-on-insulator (SGOI) 기판을 이용한 1T-DRAM의 열처리온도에 따른 특성 변화를 평가하였다. 기존의 SOI 기판을 이용한 1T-DRAM과 달리, SGOI 기판을 사용할 경우, strained-Si 층과 relaxed-SiGe 층간의 격자상수 차에 의한 캐리어 이동도의 증가효과를 기대할 수 있다. 하지만 열처리 시, SiGe층의 Ge 확산으로 인해 상부실리콘 및 SiGe 층의 두께를 변화시켜, 소자의 특성에 영향을 줄 수 있다. 열처리는 급속 열처리 공정을 통해 $850^{\circ}C$와 $1000^{\circ}C$로 나누어 30초 동안 N2/O2 분위기에서 진행하였다. 그리고 Programming/Erasing (P/E)에 따라 달라지는 전류의 차를 감지하여 제작된 1T-DRAM의 메모리 특성을 평가하였다.