• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.483-484
• /
• 2011

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.90-96
• /
• 2013

As the need of electric motor is increased rapidly throughout our society, the various application fields are created and the service market called robot gets expanded as well as the existing industrial market. Out of those, the joint systems such as humanoid that is servo actuator for position control or all fields which require multi-degree of freedom (multi-DOF) require the development of innovative actuator. It is multi-DOF spherical motor that can replace the existing system in multi-DOF operating system. But, multi-DOF spherical motor that has been researched up to date is at the stage which is insufficient in performance or mechanical practicality yet. Thus, first of all the research results and limitation of the previously-researched guide frame-type spherical motors were analyzed and then the feature of double air-gap spherical motor which was devised to complement that was studied. The double air-gap multi-DOF spherical motor is very suitable spherical motor for system applying which requires the multi-DOF operation due to its simple structure that does not require other guide frame as well as performance improvement due to its special shape which has two air-gaps. So, the validity of the study was verified by designing and producing it with 3D-FEM through the exclusive jig for multi-DOF spherical motor.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.37.6-37
• /
• 2002

Omnidirectional mobile robots are capable of arbitrary motion in an arbitrary direction without changing the direction of wheels, because they can perform 3 degree-of-freedom (DOF) motion on a 2-dimensional plane. In this research, a new class of an omnidirectional mobile robot is proposed. Since it has synchronously steerable omnidirectional wheels, it is called an omnidirectional mobile robot with steerable omnidirectional wheels (OMR-SOW). It has 3 DOFs in motion and one DOF in steering. One steering DOF can function as a continuously variable transmission (CVT). CVT of the OMR-SOW increases the range of velocity ratio from the wheel velocities to robot velocity, which may improve...

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 B
• /
• pp.823-824
• /
• 2006

This paper proposes a novel structured 3-DOF(Degree-of-Freedom) spherical motor. 3-DOF spherical motor presents some attractive features by combining pitch, roll, yaw motion in a single joint. The proposed motor has pole which is electromagnetic in stator and rotor. poles produce magnetic flux through by exciting current then produce torque. We show a novel structured rotor to avoid mechanical overlapping of each coil in rotor. The validity of the analysis is confirmed by 3D finite element method.

• 수산해양기술연구
• /
• 제32권1호
• /
• pp.59-66
• /
• 1996

This paper considers robust stability and transient behavior of the Two - Degree - of - Freedom(2DOF) servosystem. A class of uncertainties allowed in the plant model is obtained, to which the servosystem is robustly stable for any gain of the integral compensator. This result implies that if the plant uncertainty is the allowable set defined by the condition, a high - gain compensation can be carried out preserving stability to achieve a high - speed tracking response. The transient behavior attainable by the limit of the high - gain compensation is calculated using the singular perturbation approach.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.555-558
• /
• 1995

In designing the anti-sway controller for crane system in the industrial field, one of the basic problem is to keep the stability of system, even if the mathematical model of the plant is not exact and disturbance exists. Form this point of view, a two-degree-of-freedom(2DOF) servo controller effact to the system in which the integral compensation is effctive only when a modeling error and/or a disturbance input exist. In this paper, the change of load weight and variation of wire rope length considered as the structured uncertainty, and design the 2DOF servo contorller using independently the informations of reference signal and control output with both feedforward and feedback. The effectivenss is proved through the results for the anti-sway system in the system with the position control of trolley.

• 센서학회지
• /
• 제11권4호
• /
• pp.191-199
• /
• 2002

This paper presents the design concept, theoretical investigation, and fabrication of a six-degree of freedom (6-DOF) turbulent flow micro sensor utilizing the piezoresistive effect in silicon. Unlike other flow sensors, which typically measure just one component of wall shear stress, the proposed sensor can independently detect six components of force and moment on a test particle in a turbulent flow. By combining conventional and four-terminal piezoresistors in Si (111), and arranging them suitably on the sensing area, the total number of piezoresistors used in this sensing chip is only eighteen, much fewer than the forty eight piezoresistors of the prior art piezoresistive 6-DOF force sensor.

• 대한기계학회논문집A
• /
• 제29권11호
• /
• pp.1509-1517
• /
• 2005

This paper presents the two degree-of-freedom(DOF) planar parallel mechanism called 2R$\underline{P}$R-RP manipulator, whose degree-of freedom is dependent on a passive constraining leg connecting the base and the platform. First, the kinematic analysis of the mechanism is performed analytically: the inverse and forward kinematic problems are solved in the closed font the practical workspace is systematically derived, and all of the singular configurations are examined. Then, in order to determine the geometric parameters and the operating limits of the actuators, the optimization of the mechanism is performed considering its dexterity and stiffness. Finally, the kinematic performances of the optimized mechanism are evaluated through comparing to the 5-bar parallel manipulator.

• 제어로봇시스템학회논문지
• /
• 제12권5호
• /
• pp.464-472
• /
• 2006

This paper presents the two degree-of-freedom (DOF) planar parallel mechanism, called the $2{\underline{R}}RR-RP$ manipulator, whose degree-of-freedom is dependent on an additional passive constraining leg connecting the base and the platform. First, the kinematic analysis of the mechanism is performed: the inverse and forward kinematic problems are analytically solved, the workspace is systematically derived, and all of the singular configurations are examined. Then, in order to determine the geometric parameters the optimization of the mechanism is performed considering its dexterity, stiffness, and space utilization. Finally, the kinematic performances of the optimized mechanism are evaluated through the comparison study to the conventional 5-bar parallel manipulator.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.706-712
• /
• 2011

Necessary and sufficient conditions for the existence of diagonal, block-diagonal, and triangular decoupling controllers in linear multivariable systems for the most general setting are presented. The plant model in this study is sufficiently general to accommodate non-square plant and non-unity feedback cases with one-degree-of-freedom (1DOF) or two-degree-of-freedom (2DOF) controller configuration. The existence condition is described in terms of rank conditions on the coefficient matrices in partial fraction expansions.